Food Packaging Plant

Here are method(s) that control the emissions generated from the Food Packaging Plant process.

Click on the preferred Control Method to learn more about:

  • Budgetary costs (Do you own quote)
  • Codes that are relevant to this control method
  • Dimensional Data
  • Equipment in use
  • Installation examples
  • Videos
  • Owners manuals
  • Brochures

For further support, please contact us directly at 1-888-862-5356.

Centrally Ducted Filter Units
Centrally Ducted Dust Collectors such as these are ideal for large shops and centrally ducted applications. Most of these solutions are based upon self-cleaning filter cleaning systems to help reduce filter costs. In addition, Water based filtration systems are available for certain explosive and flammable applications.


For more info, please see the products and associated documentation listed below.
COVID-19 Ventilation & Air Filtration
1. What is Covid 19?
Answer: Coronavirus disease (COVID-19) is an infectious disease caused by a newly discovered coronavirus.

2. What are the Covid-19 health concerns around aerosol spread?
Answer: Scientists and researchers are continually gathering new evidence about this disease, including routes of transmission. New data suggests that it is possible for COVID-19 to spread through the air among people who are in enclosed, crowded spaces with poor ventilation for a prolonged period of time. Factors contributing to the transmission may include activities that cause heavy breathing, such as singing, dancing or exercise, especially without precautions such as wearing a mask or keeping a physical distance. However, close, person-to-person contact with an infected person before they show symptoms remains the most common method of transmission.

3. Can mechanical air filtration systems make indoor spaces safe from Covid-19?
ANSWER: If you are in a room that can’t get enough outside air for dilution, consider an air cleaner, also commonly called air purifiers. These machines remove particles from the air, usually using a filter made of tightly woven fibers. They can capture particles containing bacteria and viruses and can help reduce disease transmission.

The U.S. Environmental Protection Agency says that air cleaners can do this for the coronavirus, but not all air cleaners are equal. Before you go out and buy one, there are few things to keep in mind.

In light of the WHO's confirmation that there is "emerging evidence" of airborne transmission of Coronavirus Lev-co has put together a series of products that may assist you in designing and procuring solutions that limit the spread of airborne particles such as the coronavirus. In this section you will find equipment that addresses each of these components required in a ventilation system tailored to capture and filter and return air to your facility:

4. What do the health experts say?
ANSWER: the EPA says: " When used properly, air cleaners and HVAC filters can help reduce airborne contaminants including viruses in a building or small space. By itself, air cleaning or filtration is not enough to protect people from exposure to the virus that causes COVID-19. When used along with other best practices recommended by CDC and others, filtration can be part of a plan to reduce the potential for airborne transmission of COVID-19 indoors."

5. How do different systems work and what are the practical and health concerns?
ANSWER: See our list of Control measures listed below, Please note, the practical and health concerns are listed within each CM:

5.5 What are the common components of a Covid-19 Ventilation system
ANSWER: See Below:

  • Supply Air diffusers and/or Nozzles to direct the clean air to the occupant
  • Transport ducts and hoses
  • Powered and non-powered filter housings and air cleaners
  • Electrical controls (VFD and differential Pressure controls
  • Booster fans (Optional)
  • Capture devices

6. In what kind of environments can mechanical air filtration systems be most effective?
ANSWER: the environments that are best suited for mechanical ventilation are:

  • Nursing homes
  • Fitness clubs
  • Restaurants and bars
  • Meeting rooms
  • Lunchrooms and cafeterias

Here is an article from the CDC discussing this further: https://www.cdc.gov/niosh/docs/2003-136/pdfs/2003-136.pdf

What are the pros and cons of Local Exhaust Ventilation versus HVAC solutions? Are there any other possible solutions?
ANSWER: Local Exhaust Ventilation is best suited to the control and filtration of the covid virus because it controls the virus at source and directs the virus aerosol to the filter unit, typically before it can be inhaled by another person where HVAC simply mixes or dilutes the contaminated air allowing other persons to breathe the air in before the air is filtered from the virus.

Here are a few links to articles written about the capture and control of Covid-19 emissions:
Ducted Air Cleaners
Ducted Air Cleaners are used in a variety of applications where the filter selection often requires a specific configuration. With these collectors you can select a variety of particulate, liquid or gas phase filters such as “HEPA” filters, “Mist Agglomerators” and “Gas Adsorbers” respectively. These systems are available with or without pre-engineered and installed fan packages.

Here are some general design velocities when using "CAPTURE" Hoods:

Smoke (e.g. Welding):
  • Capture Velocity 100 FPM
  • Transport Velocity 3000 FPM
  • Minimun Face Velocity 2355 FPM
  • Dust (e.g. Grinding):
  • Capture Velocity 500 FPM
  • Transport Velocity 4000 FPM
  • Minimun Face Velocity 4000 FPM
  • Gas (e.g. V.O.C.'s):
  • Capture Velocity 50 FPM
  • Transport Velocity 2000 FPM
  • Minimun Face Velocity 785 FPM
  • Mist:
  • Capture Velocity 100 FPM
  • Transport Velocity 2250 FPM
  • Minimum Face Velocity 1766 FPM
  • Exhaust Fans
    Fans for air make up and exhaust are quite often a difficult product to find when designing a simple ducted local exhaust system. Here we offer a variety of "LEV" (Local Exhaust & Ventilation) fans specifically designed to meet the demands of such systems. These Fans are able to handle specific applications such as: - Corrosive Fumes - Abrasive Dusts - Proper Flow and Static Pressure for a particular application.

    Please feel free to contact one of our System Design Technicians for help in selecting the right fan for your application.
    Extraction Arms
    Capture at Source Extraction Arms are used to capture airborne contaminants before the contaminants have a chance to reach the workers' breathing space.

    Available in several different designs:
    • Internally Supported
    • Externally Supported
    • Telescopic
    • Mild or Stainless Steel Construction
    • Lengths: Up to 45'
    • 2.5" to 8" Diameter's Available
    Typically the Extraction Arms are connected to a fixed extraction fan, Filter system or dust collector via direct mounting or a "Header Type" duct system.

    For more info, please see the products and associated documentation listed below.
    Industrial Hose & Duct Work
    Lev-Co offers a wide variety of lightweight, flexible, abrasive resistant, heat tolerant, innovative technical hoses to provide solutions for a wide range of industrial & Automotive applications. Here are some general design velocities when using "CAPTURE" Hoods:

    Smoke (e.g. Welding):
  • Capture Velocity 100 FPM
  • Transport Velocity 3000 FPM
  • Minimun Face velocity 2355 FPM

    Dust (e.g. Grinding):
  • Capture Velocity 500 FPM
  • Transport Velocity 4000 FPM
  • Minimun Face Velocity 4000 FPM

    Gas (e.g. V.O.C.'s):
  • Capture Velocity 50 FPM
  • Transport Velocity 2000 FPM
  • Minimun Face Velocity 785 FPM

    Mist:
  • Capture Velocity 100 FPM
  • Transport Velocity 2250 FPM
  • Minimun Face Velocity 1766 FPM

    FOR MORE SUPPORT IN SELECTING THE RIGHT HOSE pls EMAIL us with details on your application at: sales@lev-co.com
  • Mist Collectors
    Mist Collectors are for a variety of mist producing applications such as: CNC Machining and Coldheading Applications. These filters are "SELF-DRAINING" and it is important that the amount of dust being captured by these systems does not exceed more than 5% of the total extracted pollutant. If the dust quantity is kept to a minimum, filter life can be expected between 1 and 5 years depending on the application and runtime.

    Here are some general design velocities when using "CAPTURE" Hoods: Mist:
  • Capture Velocity 100 FPM
  • Transport Velocity 2250 FPM
  • Minimum Face Velocity 1766 FPM


  • Here are some general design velocities when using "ENCLOSING" Hoods: Mist CNC:
  • Minimum Face Velocity 75 FPM
  • Transport Velocity 2250 FPM
  • Portable Filter Units
    Portable Dust & Fume Filter Units. Quite often “Clean Air” solutions are required throughout a work place. These units can be easily moved from location to location with ease while capturing dust and fumes where needed.

    Various Options in Filtering Systems Available:
    • Washable Filters
    • Cleanable Filters
    • Self-Cleaning Systems
    • Throw Away Filters
    All Units equipped with fan/motor assemblies to ensure adequate extraction at all times

    For more info, please see the products and associated documentation listed below.
    Single or Dual Work-Station Filter Units
    Single or Dual Work-Station Filter Units such as these are ideal for 'Cell Based' manufacturing and work stations. Most of these solutions are based upon self-cleaning filter cleaning systems to reduce filter costs.Water based systems are also available for certain explosive and flammable applications

    Some important points to consider when purchasing:
    • What is the Total Flow Rate? (How many CFM's are needed to capture the contaminants)
    • What is the exact resistance (filter and capture device losses) required for the fan to overcome?
    • Do I have enough filter media in the collector?(Air to cloth ratio)
    • Will it stand up to your environment (Eg: is it made from Plastic or Steel?)
    • Filter cleaning: Does the filter cleaning system really work in your application?
    • What will be my filter, maintenance and energy costs per year?
    • Are there any tertiary risks such as fire, explosion, etc, that I need to consider?
    For more info, please see the products and associated documentation listed below.