2AU8-4703
Overview
Specificiations
Shipping Specificiations
| Shipping Weight | 0.0 lbs. |
| Shipping Length | in. |
| Shipping Width | in. |
| Shipping Height | in. |
The MPH8 Oil Mist Collector produces 800 CFM with 95%+ filter efficiency and is a direct machine-mounted, self-draining system designed for single or multiple metalworking applications.
The unit comes with self-draining filters and has a horizontal profile. It includes mounting angles to allow for surface and low ceiling roof mounting. The MPH8 comes equipped with two (2) 1" (25mm) NPT drains for left-hand or right-hand requirements. It features a stage one Mist-Plus primary filter, a post-filter option, and a 1HP 3 PH TEFC motor.
Typically, these units are directly mounted to machines vertically for direct capture of contaminants or can be suspended from any suitable roof support strut for low ceiling applications.
Main Options:
- Motor Options
- Filter Options
- Preventative Maintenance Pressure Gauges
- Variable Frequency Drives
CONSTRUCTION
- Includes filter access door on each side for left or right-hand applications
- Acoustically lined blower cabinet
- Max Door Opening: 11 ft ²
- Pressure gauge to indicate filter changes
- Single Phase Motor
Specifications:
- Construction: 18 Gauge welded steel cabinet with powder-coat finish
- Blower Pkg (HP): 1 HP
- Noise Level (dBA): 75 dBA
- Electrical: 115/1/60, 12 Amps
- Nominal Air Flow (CFM): 800
KEY CRITERA
- 95% Collection Efficiency at 1 to 4 Microns: Designed specifically for oil mist, the MistPlus® II filter provides up to 95% filtration efficiency of 1 to 4 micron mist droplets. The proprietary, V-shaped filter design aids in drainage of collected mist; extending filter life.
- Sealed Cabinet Construction: 18 gauge steel, seam-sealed cabinet eliminates contaminant escape common with stitch-welded or bolt-on panel designs.
- Lever locking Filter Placement System: Ensures quick and accurate filter replacement; eliminates contaminant bypass of filters, reduces equipment and facility maintenance.
- Low-Profile Cabinet Design: Horizontal orientation allows for installation directly above the machine tool-even in low ceiling applications; saves floor space.
- Superior Liquid Drainage: 10" (250mm) bottom inlet and 2" (50mm) deep sump enable high-volume, 24-hour, 7-day operation; no manual handling of liquids.
- Extended Filter Life, Reduced Maintenance: MistPlus® II filter design reduces dirt loading and filter maintenance; extending filter life up to two years.
- Direct-Drive Blower: Energy-efficient; superior air flow and higher static pressure operation; no belts or pulleys to replace, acoustic-lined cabinet.
SUITABLE FOR
- Grinding sparks
- CNC Machining
- Lathe Work
- Aerospace Machining
- Food Processing that involves oil
- Mist Collectors Learn More
Aerospace
Construction
Educational
Food & Beverage
Machine Shop
Metalworking
- Chip Collection
- Circular Saw
- Food Packaging Plant
- Machine Shop
- Machining
- Metal Spinning
- Mist Collection
- Surface Grinders
- Swing Grinder
Contact sales for more information at sales@lev-co.com
IMPORTANT: For your Health and Safety, make sure to talk to an application engineer before purchasing.
All prices are FOB our warehouse in Port Perry, Ontario. Prices exclude taxes, delivery, installation, electrical work, mechanical installation, fire/explosion detection and suppression, mechanical and structural engineering, approvals, drawings, governmental permits, and related fees unless specifically noted above.
Payment terms are Net 30 OAC for quotes under $7,500. For quotes over $7,500, payment terms are 40/30/30 OAC: 40% with order, 30% prior to the day of shipment, and 30% Net 30. Orders must total a minimum of $500 NET. Interest of 18% per year will be charged on all overdue accounts. A 3% service charge will be applied to credit card payments.
Payment and Release of Goods
All products are subject to availability and will not be released for shipment or pickup until full payment has been received and processed. Products remain the property of Lev-co until payment has been received in full.
Clearance item pricing applies only to the specific product, quantity, and configuration shown on this quote. Clearance items are available on a first-come, first-served basis and are subject to prior sale. Products are not reserved until the order has been accepted by Lev-Co and any required deposit has been received. Clearance pricing and availability are valid only while quantities last and may change without notice as part of Lev-Co's Clearance Center pricing program.
Unless specifically noted otherwise, clearance items are new, unused Lev-Co products and include Lev-Co's standard 3-year limited warranty. All Lev-Co sales come with our limited 30-day satisfaction guarantee unless otherwise noted on the quote.
Due to the limited-quantity nature of clearance inventory, all cancellations, returns, or requests for RGA approval are reviewed on a case-by-case basis and require prior written approval from Lev-Co. Any approved return may be subject to a 30% restocking fee, plus applicable inspection, repackaging, repair, and freight charges. Requests for RGA approval must be submitted within 15 days of receipt. If you believe you may need to return a product, please request approval before purchasing.
The contents, documents, images, drawings, attachments, emails, videos, facsimiles, messages, and related materials contained in this quote and associated communications are confidential and remain the property of Lev-Co, The Local Exhaust & Ventilation Company Inc. They are intended solely for review by the intended recipient(s). Unauthorized use, copying, scanning, emailing, faxing, distribution, or other disclosure of this information is prohibited.
Payment is due in full upon shipment. Net terms may be offered at Lev-co's discretion to established clients who have maintained an account with Lev-co for two or more years.
Discontinued products
Lev-co does not assume liability for the improper installation, use, modification, maintenance, or operation of systems and components supplied by Lev-co. All components and systems must be installed by a licensed electrician, or the required licensed professional as required by local law. The end user is responsible for ensuring compliance with all applicable safety codes and authorities having jurisdiction.
Discontinued, obsolete, clearance, demo, surplus, used, or as-is products are sold on an "as-is, where-is" basis. Unless otherwise stated in writing by Lev-co, these products are sold without warranty, return, exchange, cancellation, or credit.
The purchaser is responsible for confirming the product is suitable for its intended use, including fit, function, compatibility, code compliance, installation requirements, and availability of replacement parts or consumables.
Lev-co shall not be liable for any direct, indirect, incidental, or consequential damages arising from the purchase, installation, use, lack of support, lack of replacement parts, or incompatibility of discontinued products.
