LF-RTA-42
25% OFF SAVE $5,022.34
Overview
Specificiations
Shipping Specificiations
| Shipping Weight | 0.0 lbs. |
| Shipping Length | in. |
| Shipping Width | in. |
| Shipping Height | in. |
Roof exhausters provide a simple, low maintenance method for exhausting large quantities of air through the roof.
Tubeaxial upblast propeller direct drive Roof Exhauster for Heat and Smoke Removal Fans has been designed and tested for heat, and smoke removal with horsepower's up to 15 HP and CFM up to 56,000 cfm.
CONSTRUCTION
- Sturdily constructed belt drive roof exhausters for industrial and commercial applications.
- Galvanized steel wind-band and rain-proof butterfly dampers.
- Cast iron pillow block bearings (out of air stream), complete with external grease fittings.
- Galvanized steel wind-band & rain-proof butterfly dampers that rotate easily on brass bushings.
- Cast aluminum blades.
- Heavy duty sheaves and belts out of air stream.
- Totally enclosed ball bearing motors (clean dry air, maximum 200° F).
- Available accessories include roof curbs, disconnect switches and explosion proof motors.
- Direct Drive fans require little maintenance and are best controlled with VFD speed contollers
KEY CRITERA
SUITABLE FOR
- Suitable for General Ventilation and Local Exhaust Ventilation applications where little to no external Static Pressure is required. Heavy duty commercial applications and light duty industrial applications. Low levels of dust, fumes and gases can be processed with these fans with the understanding that all codes are follows (EG: NFPA explosive gases & Dust, OSHA, etc.
- Exhaust Fans & Controls Learn More
Aerospace
Art's
Auto body repair
Chemicals and Plastics
Construction
Educational
Farm & Heavy Equipment
Food & Beverage
Forensics
Machine Shop
Marine
Metalworking
Mining & Quarrying
Misc. Operations
MRO
Municipal & DOT Garage
Museums & Artifacts
National Defense
Painting
Paper & Leather
Process Engineering
Public Transportation
Refineries & Energy
Robotics
Vehicle Repair
Waste Management
Welding Shops
Woodworking
- Air Cooled Mixer and Muller
- Artifact Cleaning
- Auto Shop
- Banbury Mixer
- Bucket Elevator Ventilation
- Bus Maintenance and Repair
- Canning
- Cars & Small Trucks Repair
- Cigarette and Tobacco Smoke
- Cleaning with Solvents and VOC's
- Concrete Demolition Hammer
- Diesel Engines Repair
- Dip Tank
- Drilling
- Drying Oven Ventilation
- Farm Equipment Repair
- Food Packaging Plant
- Forensic Laboratories
- Fruit Production
- Heavy Equipment Repair
- Hull Building
- Large Paint Booth
- Lead Smelting
- Military Vehicle Repair
- Mixer And Muller Hood
- Mortuary Table
- Nickel Mining
- Paint Mix Storage Room
- Paleontology
- Paper Bleaching
- Paper Pulping
- Refrigeration
- Renewable Energy Manufacturing
- Resin Manufacturing
- Robot Welding
- Roller Mill Ventilation
- Rubber Manufacturing
- Soap Manufacturing
- Steel Welding
- Straight Line Automatic Buffing
- Subway Maintenance and Repair
- Trailer Interior Spray Painting
- Train Maintenance and Repair
- Truck Repair
- Vehicle Repair Garage
- Welding Shop
- Wood Briquetting
- Wood Incineration
Contact sales for more information at sales@lev-co.com
IMPORTANT: For your Health and Safety, make sure to talk to an application engineer before purchasing.
All prices are FOB our warehouse in Port Perry, Ontario. Prices exclude taxes, delivery, installation, electrical work, mechanical installation, fire/explosion detection and suppression, mechanical and structural engineering, approvals, drawings, governmental permits, and related fees unless specifically noted above.
Payment terms are Net 30 OAC for quotes under $7,500. For quotes over $7,500, payment terms are 40/30/30 OAC: 40% with order, 30% prior to the day of shipment, and 30% Net 30. Orders must total a minimum of $500 NET. Interest of 18% per year will be charged on all overdue accounts. A 3% service charge will be applied to credit card payments.
Payment and Release of Goods
All products are subject to availability and will not be released for shipment or pickup until full payment has been received and processed. Products remain the property of Lev-co until payment has been received in full.
Clearance item pricing applies only to the specific product, quantity, and configuration shown on this quote. Clearance items are available on a first-come, first-served basis and are subject to prior sale. Products are not reserved until the order has been accepted by Lev-Co and any required deposit has been received. Clearance pricing and availability are valid only while quantities last and may change without notice as part of Lev-Co's Clearance Center pricing program.
Unless specifically noted otherwise, clearance items are new, unused Lev-Co products and include Lev-Co's standard 3-year limited warranty. All Lev-Co sales come with our limited 30-day satisfaction guarantee unless otherwise noted on the quote.
Due to the limited-quantity nature of clearance inventory, all cancellations, returns, or requests for RGA approval are reviewed on a case-by-case basis and require prior written approval from Lev-Co. Any approved return may be subject to a 30% restocking fee, plus applicable inspection, repackaging, repair, and freight charges. Requests for RGA approval must be submitted within 15 days of receipt. If you believe you may need to return a product, please request approval before purchasing.
The contents, documents, images, drawings, attachments, emails, videos, facsimiles, messages, and related materials contained in this quote and associated communications are confidential and remain the property of Lev-Co, The Local Exhaust & Ventilation Company Inc. They are intended solely for review by the intended recipient(s). Unauthorized use, copying, scanning, emailing, faxing, distribution, or other disclosure of this information is prohibited.
Payment is due in full upon shipment. Net terms may be offered at Lev-co's discretion to established clients who have maintained an account with Lev-co for two or more years.
Discontinued products
Lev-co does not assume liability for the improper installation, use, modification, maintenance, or operation of systems and components supplied by Lev-co. All components and systems must be installed by a licensed electrician, or the required licensed professional as required by local law. The end user is responsible for ensuring compliance with all applicable safety codes and authorities having jurisdiction.
Discontinued, obsolete, clearance, demo, surplus, used, or as-is products are sold on an "as-is, where-is" basis. Unless otherwise stated in writing by Lev-co, these products are sold without warranty, return, exchange, cancellation, or credit.
The purchaser is responsible for confirming the product is suitable for its intended use, including fit, function, compatibility, code compliance, installation requirements, and availability of replacement parts or consumables.
Lev-co shall not be liable for any direct, indirect, incidental, or consequential damages arising from the purchase, installation, use, lack of support, lack of replacement parts, or incompatibility of discontinued products.
