AirPod-III
Overview
- Unit does not include filters, see options)
- The chosen filters will be installed on the unit at the time of shipment & the unit is wrapped in plastic. Except the AD filters for Airpod III will be shipped in a separate box.
Specificiations
Shipping Specificiations
| Shipping Weight | 675.0 lbs. |
| Shipping Length | 46 in. |
| Shipping Width | 46 in. |
| Shipping Height | 110 in. |
Free-standing Ambient Collection System. AirPods consists of 1 to 3 modules that stack up to three modules high, easily adapting to multiple filtration configurations. The flow rates for the different configurations range from 2500 - 5000 CFM.
The way these systems work is they draw in airborne dusts and gases that settle at floor level. Particles are drawn into the four-sided air intake, where they are then filtered and discharged vertically above the work area. By drawing in the air near the floor, cooled air is discharged into the warmer air near the ceiling creating an effective dilutionary and energy savings air pattern.
All AirPods feature washable pre-filters, a primary box filter, and optional HEPA after-filters combine to provide 99.97% filtration efficiency at noise levels as low as 66 dBa. These are portable units, rather than being fixed in place with a mounting solution.
Main Options:
- Filter Options
- After Filter for Absorption Media
- Motor Voltage Selection
- Caster Options
- Variable Frequency Drives
- Control Panel Accessories
CONSTRUCTION
- 12/14/16 ga. Welded zinc-coated steel cabinet
- Blue powder-coat finish
- Blower Pkg (HP): AirPod I & II: 2-speed forward curve, direct drive
- Blower Pkg (HP): Optional AirPod II and III: Dynamically balanced BI blower, non-sparking, motor/blowers
- AirPod I and II, standard: 3/4 HP,115/1/60, 9.4 amps
- AirPod III, standard: 3 HP, 208-230/460/3/60, 7.8-7.2/4 amps; optional: 3 HP, 230/1/60 11.7 amps
KEY CRITERA
- Flexibility: AirPod modules may be stacked one, two, or three high, providing as much filtration capacity as needed.
- Versatility: The AirPod I comes standard with casters allowing the unit to be moved to the dust source with ease. The larger units can be easily positioned within the work area, each requiring a small 31" x 31" footprint.
- Maximized Filter Surface Area: Each AirPod module features standard panel filters on all four sides.
- Efficient Filtration: Standard filter has MERV 11 efficiency (98% at 1.0 to 3.0 microns) with ULĀ® Class 2 flame-retardant filters; other MERV and AD/carbon filter configurations are also available.
- Easy Maintenance: Fully visible, easy-access filters simplify monitoring and replacement.
- Low Cost of Operation: The AirPod uses standard disposable filters and requires no compressed air.
SUITABLE FOR
- Metal Sparks
- Wood Dust
- Plastic Dust
- VOC/Paint Fumes
- Paper Dust
- Ambient Air Cleaners Learn More
Aerospace
Apparel & Clothing
Auto body repair
Chemicals and Plastics
Educational
Electronics
Farm & Heavy Equipment
Machine Shop
Metalworking
Misc. Operations
MRO
Municipal & DOT Garage
Museums & Artifacts
National Defense
Robotics
Vehicle Repair
Waste Management
Welding Shops
- 3D Printing
- Auto Shop
- Buffing and Polishing
- Cigarette and Tobacco Smoke
- Clothing Assembly Line
- Deburring
- Heavy Equipment Repair
- Indoor Pistol and Small Bore Rifle Range Ventilation
- Machine Shop
- Paleontology
- Pesticide Manufacturing
- Stainless Welding
- Steel Welding
- Textile Dyeing
- Torch Cutting Ventilation
- Waste Management Facilities
- Welding Shop
Contact sales for more information at sales@lev-co.com
IMPORTANT: For your Health and Safety, make sure to talk to an application engineer before purchasing.
All prices are FOB our warehouse in Port Perry, Ontario. Prices exclude taxes, delivery, installation, electrical work, mechanical installation, fire/explosion detection and suppression, mechanical and structural engineering, approvals, drawings, governmental permits, and related fees unless specifically noted above.
Payment terms are Net 30 OAC for quotes under $7,500. For quotes over $7,500, payment terms are 40/30/30 OAC: 40% with order, 30% prior to the day of shipment, and 30% Net 30. Orders must total a minimum of $500 NET. Interest of 18% per year will be charged on all overdue accounts. A 3% service charge will be applied to credit card payments.
Payment and Release of Goods
All products are subject to availability and will not be released for shipment or pickup until full payment has been received and processed. Products remain the property of Lev-co until payment has been received in full.
Clearance item pricing applies only to the specific product, quantity, and configuration shown on this quote. Clearance items are available on a first-come, first-served basis and are subject to prior sale. Products are not reserved until the order has been accepted by Lev-Co and any required deposit has been received. Clearance pricing and availability are valid only while quantities last and may change without notice as part of Lev-Co's Clearance Center pricing program.
Unless specifically noted otherwise, clearance items are new, unused Lev-Co products and include Lev-Co's standard 3-year limited warranty. All Lev-Co sales come with our limited 30-day satisfaction guarantee unless otherwise noted on the quote.
Due to the limited-quantity nature of clearance inventory, all cancellations, returns, or requests for RGA approval are reviewed on a case-by-case basis and require prior written approval from Lev-Co. Any approved return may be subject to a 30% restocking fee, plus applicable inspection, repackaging, repair, and freight charges. Requests for RGA approval must be submitted within 15 days of receipt. If you believe you may need to return a product, please request approval before purchasing.
The contents, documents, images, drawings, attachments, emails, videos, facsimiles, messages, and related materials contained in this quote and associated communications are confidential and remain the property of Lev-Co, The Local Exhaust & Ventilation Company Inc. They are intended solely for review by the intended recipient(s). Unauthorized use, copying, scanning, emailing, faxing, distribution, or other disclosure of this information is prohibited.
Payment is due in full upon shipment. Net terms may be offered at Lev-co's discretion to established clients who have maintained an account with Lev-co for two or more years.
Discontinued products
Lev-co does not assume liability for the improper installation, use, modification, maintenance, or operation of systems and components supplied by Lev-co. All components and systems must be installed by a licensed electrician, or the required licensed professional as required by local law. The end user is responsible for ensuring compliance with all applicable safety codes and authorities having jurisdiction.
Discontinued, obsolete, clearance, demo, surplus, used, or as-is products are sold on an "as-is, where-is" basis. Unless otherwise stated in writing by Lev-co, these products are sold without warranty, return, exchange, cancellation, or credit.
The purchaser is responsible for confirming the product is suitable for its intended use, including fit, function, compatibility, code compliance, installation requirements, and availability of replacement parts or consumables.
Lev-co shall not be liable for any direct, indirect, incidental, or consequential damages arising from the purchase, installation, use, lack of support, lack of replacement parts, or incompatibility of discontinued products.
