Image for Portable Filter Units

Solutions for

Portable Filter Units

Main image for Portable Filter Units

Portable Filter Units

Portable Dust & Fume Filter Units. Quite often “Clean Air” solutions are required throughout a work place. These units can be easily moved from location to location with ease while capturing dust and fumes where needed.

Various Options in Filtering Systems Available:
  • Washable Filters
  • Cleanable Filters
  • Self-Cleaning Systems
  • Throw Away Filters
All Units equipped with fan/motor assemblies to ensure adequate extraction at all times

For more info, please see the products and associated documentation listed below.
(02-02) PCH-1 - Heavy Dusts & Smoke - Self cleaning filter system built in - 800 to 1500 CFM - 7” Ø Extraction Arm* **
pch-1-portable-filter-with-extraction-arm - Main Image
Portable cartridge collector, ideal for medium and heavy-duty maintenance or production welding, grinding and most dust producing applications.

It comes complete with 7' EZ-Arm® high flow extractor (with damper), (1) Clean2® filter cartridges (150ft² of media), manual VIBRA-PULSE® filter cleaning system, a 1.5 HP TEFC motor, backward incline blower, removable 5 gallon external dust drawer, 8” front wheels, and 5” rear swivel casters.
Attachments
001 - Equipment Specification and Dimension Drawings:
004 - Product Videos:
017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
(02-03) PCH-2 - Heavy Dusts & Smoke - Self cleaning filter system built in - 1000 to 2200 CFM - 7” Ø Extraction Arm* **
pch-2-portable-filter-with-extraction-arm - Main Image
The PCH-2 is a portable cartridge collector, ideal for medium and heavy-duty welding, grinding, cutting and other heavy dust producing applications.

Rolled into position with the aid of 2 - large 8” diameter front wheels and 2 - 5” diameter locking rear casters, the PCH-2 easily navigates common obstacles found on the shop floor such as air hoses, extension cords, etc. The 2 foot wide “Push” handle, doubles nicely as a “Cord Caddy” for the 12Ga, 25’, safety yellow extension cord that comes standard with all 115/1/60 models. The HEAVY DUTY extraction arm is easily placed above or next to the emission source, hovering in place, allowing the fumes to be extracted at source before they contaminate they work environment or enter the operators breathing zone. Coming standard with a 10' EZ-Arm® high flow extractor (with damper), this unit is upgradeable to 14’ or 17’, single or dual extraction arms. (2) Clean2® high efficiency filter cartridges, clean the contaminated air to an efficiency level above 99.5% while allowing for optional HEPA or gas phase filters to be installed as required. Main filters can be cleaned in place, without removal, by simply activating the VIBRA-PULSE® filter cleaning system, a simple reverse pulse cleaning mechanism that cleans the filters with compressed air from the inside out. The dust is then easily removed from a cam-lock sealed drawer. Comes standard with a 115V/1/60 1.5 HP 1000 CFM fan, the PCH-2 can also be ordered with a 1200 CFM 3HP, or 1500 CFM 5HP, 230-460/575V/3/60Hz Fan. All units come complete with EPact Baldor Super E, Premium efficiency motors and carry a complete system warranty of 3 years.
Attachments
001 - Equipment Specification and Dimension Drawings:
003 - Client Installations - Case Studies with Photos:
017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
(02-04) Mobi-Pulse 1 (700 to 1400 CFM) **
mobi-pulse-1-portable-filter-with-extraction-arm - Main Image
The Mobi-Pulse 1 is portable cartridge collector with a capacity up to 800 CFM. This unit is ideal for medium and heavy-duty maintenance or Low to Medium production welding, grinding and most dust producing applications.

The standard Unit comes complete with (1) only 10' Flexi-I Extraction arm (6" dia.) with damper, (1) only Clean2® filter cartridge (150ft² of media), manual JET PULSE filter cleaning system, a 1 HP 115V/1/60 TEFC motor, centrifugal blower, removable 5 gallon dust drawer, 5” front (fixed) & rear (swivel) casters.
Attachments
001 - Equipment Specification and Dimension Drawings:
(02-05) Mobi-Pulse 2 (800 to 2200 CFM) **
mobi-pulse-2-portable-filter-unit-with-extraction-arm - Main Image
The Mobi-Pulse 2 is an 800 to 1500 CFM portable cartridge collector, ideal for medium and heavy-duty maintenance or production welding, grinding and most dust-producing applications.

It comes complete with 10' Flexi II Extractor Arm (8" dia.) with damper, (2) Clean2® filter cartridges (150ft² of media each), manual VIBRA-PULSE® filter cleaning system, TEFC motor, removable 10 gallon external dust drawer, 8” front wheels, and 5” rear swivel casters.
Attachments
001 - Equipment Specification and Dimension Drawings:
(02-065) Multi-Flex Portable Mist collector c/w 10' long Flexi-II Arm **
multi-flex-portable-filter-mist-collector - Main Image
Efficient portable oil mist filter with superior FLEXI-II Extraction Arm

Portable multi-purpose 2000 M3/H (1200 CFM) filter with the following features:
  • Can be configured to suit many applications such as Oil mist, Gases and Vapours, Fine particulate
  • Optional HEPA and Adsorption filters available
  • Spark Proof fan assemblies and explosion proof motors
  • Superior 10Ft long and Ø8" Diameter FLEXI-II Extraction Arm c/w an advanced design 'Parallelogram' counter balancing system
  • 2 Fixed and 2 Swivel Casters (Locking)
  • Attachments
    001 - Equipment Specification and Dimension Drawings:
    003 - Client Installations - Case Studies with Photos:
    004 - Product Videos:
    (02-09) Mini Flex - (12''L x 13''W x 20''H, 2xØ3 inlet @ 100 CFM) **
    mini-flex-portable-filter-with-extraction-arm - Main Image
    These lightweight units will go anywhere. Easily used on its own or paired with a table-mounted extraction arm, The unit quickly removes harmful soldering fumes from the breathing and work zone

    Soldering Fume Collector with a (1) 1" Poly Filter, (1) 99.97% HEPA filter, 1" charcoal filter, a 200 Watt motor, 115/1/60Hz (0.85 amps), and Aluminum Hood and 2 - 3" x 42" long hose.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    (02-12) MicroAir Systems Portable UNIT MC-1500**
    micro-air-systems-air-filter-with-extraction-arm - Main Image
    Portable Cartridge collector suited for Weld Smoke & fumes, Metalworking dust, and Process dust & powders

    When selecting a system for weld fume and smoke, there are many contributing factors to
    provide equipment that meets all of your needs. Micro Air can design the system to your unique
    filtration efficiencies, floor space utilization, worker mobility and portability, and budget, all
    while meeting OSHA and NIOSH standards. By using our high efficiency cartridge or HEPA units,
    we can eliminate the need for costly make-up air by filtering and exhausting the air back into
    your facility.
    Attachments
    002 - Brochures:
    (02-13) SCC Series- Trolley-mounted vacuum filter for wood dusts and shavings **
    Portable-dust-collector-for-wood-dust - Main Image
    Trolley-mounted vacuum filter for wood dusts and shavings.

    Due to their heavy use in the industrial environment, the SCC series dust collectors are very strong and solid; this guarantees longer duration through time. Moreover, thanks to accurate design, they are reliable and user friendly. SCC series is suitable for the extraction of dusts of a various nature and dry shavings on individual or multiple sources of dust.
    (02-14) Dustflex- Down flow wheeled filter for welding fumes, fine and coarse dusts as well as of small quantities of chips **
    dustflex-smoke-grinding-dust-wet-pre-filter - Main Image
    The Dustflex DF are filter units equipped with horizontal cartridges suitable for suction and filtration of welding fumes, fine and coarse dusts as well as of small quantities of chips.


    They are composed by powder coated steel panels and prefitted with articulated arm flanged connection model UNIVERSAL NO-SMOKE 3.3 mts (Standard) or EVOLUTION NO–SMOKE 3 mts (Optional) both in Dia 6" (150 mm). They are engineered to be used inside the work premises.
    The polluted air is sucked through the inlet thanks to the depression created by the suction fan positioned on the clean side.
    The filter unit consists of one vertical pre-chamber, where the heaviest dusts are sorted out, falling then in a first collecting bin. The following labyrinth together with the high efficiency filtering cartridges complete the filtration of the remaining fine dusts collected in the second bin.
    The high performance fan, placed just on the top of the unit, assures a high suction capacity and a low noise level, the clean air is exhausted out through a top grill.
    The JETCLEAN DF thanks to the pneumatic cleaning automatic system (with compressed air) grants the perfect efficiency of the filter cartridges.
    The CLEANING DF unit is equipped instead with disposable filter
    cartridges.
    (02-23) Roll-Flex-V - 700 to 1,400 CFM - VOC's and Odours - c/w 6.5 Extraction Arm **
    roll-flex-VOC-filter-with-extraction-arm - Main Image
    This "V" version of the ROLL FLEX filter is ideally suited for most VOC, ODOUR, and SMALL SPRAY painting applications.


    The air is pre-filtered with a washable particulate filter and then then treated by either a single or dual stage, "gas phase" adsorption media filter. This solution is compact, very flexible and comes complete with a 7’ or 10' extraction arm.

    Attachments
    001 - Equipment Specification and Dimension Drawings:
    (02-99) SE1400 Smoke Extractor **
    se1400-smoke-extractor-with-extraction-arm - Main Image
    Portable Filtration of Dust and Gases c/w 2 Stage filtration (Spark arresting Pre-filter & Washable Main filter), Fan & Super flexible Extraction Arm. Capacity of 1450 CFM ''Free-Blowing' and 700 CFM ''at the Hood''


    The SE1400 smoke extractor provides both high volume extraction and a high degree of filtration - up to 99.9% efficiency. The extraction arm captures welding fume and dust at a distance of 12 - 20" (30 - 50 cm) from the source and within an area of 20" (0.5 m) diameter. The arm can be rotated through 360 degrees. The unit can also be fitted with an activated charcoal filter which removes gases from polluted air. Also available with a HEPA filter.
    Available EXCLUSIVELY at all RED-D-ARC Locations in North America
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    (11-011) Mobi-Oil Portable Filter - Self Draining Filters (600 CFM) **
    mobi-oil-portable-coolant-mist-collector-with-extraction-arm - Main Image
    Mobi-oil is an easy to use, portable filter that extracts oil & coolant mist from lathes, milling machines, drill presses and other similar processes.

    This filter comes complete with a self-supporting extraction arm (7’ or 10’) with a simple to position extraction hood that allows the collection and filtration of mists and liquids, “at-source” before they have a chance to escape into the workplace. The collected contaminants are filtered by a series of specifically designed filters that allow the cleaned air to be returned back to the facility and the mist & liquids to drain into one (1) of two plastic containers. The collected liquids can then be reused in the machining process.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    (12-01) Porta-Flex - Weld Fume - Washable and/or Disposable Filters - (125 & 250 CFM)
    porta-flex-portable-air-cleaner - Main Image
    At 28 lbs., these lightweight units will go anywhere. Designed for use in confined spaces and areas where portability is a must. The one-man portable unit quickly removes harmful airborne smoke and particulate from the breathing and work zone through the 8' flexible hose and optional positioning arm and nozzles with magnetic base.

    The large selection of filter combinations allows these units to effectively capture and remove airborne smoke, dust, fumes, grit, or other contaminants from welding and other industrial processes.
    Our P-610 unit is designed for use with smokeless welding torches and lighter duty applications for collection of dust and smoke at the source. Polluted air is drawn away and filtered through a 3-stage filtration system.
    The P-612 industry benchmark air-cleaning unit collects dust and smoke at the source. Polluted air is drawn away and filtered through a 3-stage filtration system. The dual-powered fan system assures consistent and effective performance. The side selection of filter combinations allows the unit to be used in a variety of applications.
    The P-614 is the same as the P-612 industry benchmark air-cleaning unit, yet comes complete with an "AUTO-START" control which turns on the collector when the welder strikes the arc.
    All units come c/w the following standard filter
    • Very lightweight extraction Hose 2" dia. (50mm), 8' long (2.5m)
    • Heavy duty 14 ga. electrical cable and plug 15' (4.5M)
    • All steel construction: Weight (28 Lbs 13kg)
    • Compact design 650 x 250 x 450mm
    • "Plug & Play" design: 110V/1/60Hz
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    001a - How to Install (How to install local exhaust system, Isometric and Exploded Views):
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (12-02) V1 - Weld Fume & Source Captured Dust - Washable and/or Disposable filters - (107 & 200 CFM)**
    v1-portable-high-vacuum-hvlp-dust-and-smoke-collector - Main Image
    The V Series High Vacuum Systems are filtration systems designed to be used to capture fumes & dust as close to the source of emission as possible. Typically fumes & dust are captured “On-Tool” (in the case of handheld grinders) or “On-Gun” (in the case of welding guns).

    200 CFM Portable high vacuum dust, smoke and fume collector w/high efficiency cleanable/disposable cartridge filter, 2 motor blowers, 115/1/60, 16 amps, 2/lighted on-off switch & 6’ power cord, cord wrap/handle & caster wheels.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (02-01) Roll-Flex - Weld Fume, Dusts & Gases - 700 to 1,400 CFM - 6.5” Ø Extraction Arm* **
    roll-flex-portable-extraction-arm-cleanable-filter - Main Image
    ROLL FLEX filter ideally suited for most welding fumes, grinding and non-explosive/flammable dust applications. This solution is compact, very flexible and comes complete with a 7’ or 10’ extraction arm.

    Best suited for the following applications:
    • Training & Testing facilities & schools
    • Light to Medium welding applications
    • MRO-Maintenance repair & overhaul
    • "Rework" applications.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    003 - Client Installations - Case Studies with Photos:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (02-08) MiniVac - Multipurpose Low flow - 150 to 300 CFM - 2.5” Ø Extraction Arm **
    mini-flex-filter-with-ez-arm-jr-extraction-arm - Main Image
    MiniVac portable air cleaner is designed for source extraction and filtration of dust and smoke. These small air cleaners are ideal when combined with self-supported extraction arm(s) or for ducted "Source-capture" applications.


    Airflow:
    • 120 CFM - single arm
    • 210 CFM - dual arms (105 CFM/arm)
    • 250 CFM - three arms (80 CFM/arm)
    • 300 CFM@ 1.5" w.g. (no arms)
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    003a - Client Installations - Case Studies with Video:
    004 - Product Videos:
    007 - Written Specifications:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (02-07) MiniPac - Flammable Gases & Volatile Organic Compounds - 650 to 1000 CFM - 7” Ø Extraction Arm **
    mini-pac-portable-filter-with-extraction-arm - Main Image
    The MiniPac is a Portable Air cleaner best suited for Flammable Gases & Volatile Organic Compounds.

    Portable air cleaner with (1) 7’ long E-Z Arm® high flow extractor (1) 2” aluminum mesh pre-filter, (1) 95% bag filter (28ft² of media), a ¾ HP TEFC motor, 115/230/1/60Hz (9.8/4.9 amps), and 5” casters, (2) fixed and (2) swivel with brakes.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (12-03) V2 - Weld Fume & Source Captured Dust - Self Cleaning filter system - (190 CFM) **
    v2-portable-high-vacuum-hplv-dust-and-smoke-collector-with-hepa-filter - Main Image
    The V Series High Vacuum Systems are filtration systems designed to be used to capture fumes & dust as close to the source of emission as possible. Typically fumes & dust are captured “On-Tool” (in the case of handheld grinders) or “On-Gun” (in the case of welding guns).

    Portable high vacuum cartridge collector, 2 Clean 2® filter cartridges 107 ft2 of media ea., Vibra-Pulse® cleaning system.Must order hose connector separately.
    (12-04) V410 - Weld Fume & Source Captured Dust - Self Cleaning filter system - (300 & 500 CFM)**
    v410-portable-high-vacuum-hplv-dust-and-smoke-collector-with-hepa-filter - Main Image
    The V Series High Vacuum Systems are filtration systems designed to be used to capture fumes & dust as close to the source of emission as possible. Typically fumes & dust are captured “On-Tool” (in the case of handheld grinders) or “On-Gun” (in the case of welding guns).

    Portable high vacuum cartridge collector, (2) Clean 2® filter cartridges 150ft² each, factory pre-coated and include manual Vibra-Pulse® cleaning system. Must order hose connector separately.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    (02-013) Roll-Flex SCF Weld Fume, Dusts & Gases - 700 to 1,400 CFM - 6.5” Ø Extraction Arm* **
    roll-flex-eco-portable-extraction-arm-self-cleaning-filter - Main Image
    Roll Flex SECF Mobile mechanical filter for welding fumes, grinding dust etc. Compact, flexible, and self-cleaning. The extraction arm captures fume and dust at a distance of 30-50 cm (12-20'') from the source and within an area of 0.5m (20'') diameter.

    Black hood w/ optimized airflow & ring handle & built-in damper. Flameproof PVC hose 160mm (6.5”)Ø. This unit can also be fitted with an activated carbon filter which removes gases from polluted air.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    (02-06) PAC91 - Flammable Gases & Volatile Organic Compounds - 800 to 1,600 CFM - 7” Ø Extraction Arm **
    pac91-portable-filter-with-extraction-arm - Main Image
    Portable air cleaner with extraction arm to capture dust, mist, odours and gases right at the source.

    The patented self-supporting, flexible pickup hose can be easily positioned in all three axes, allowing complete capture to help comply with OSHA (when properly used and maintained) and insurance regulations. Applications include: coolant mist, carbon dust, plastic smoke, grinding dust, sanding dust, welding smoke, lint, fibers, and fumes.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    001a - How to Install (How to install local exhaust system, Isometric and Exploded Views):
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):