Animated diagram for Mist Collectors

Mist Collectors

Mist Collectors are for a variety of mist producing applications such as: CNC Machining and Coldheading Applications. These filters are "SELF-DRAINING" and it is important that the amount of dust being captured by these systems does not exceed more than 5% of the total extracted pollutant. If the dust quantity is kept to a minimum, filter life can be expected between 1 and 5 years depending on the application and runtime.

Here are some general design velocities when using "CAPTURE" Hoods: Mist:
  • Capture Velocity 100 FPM
  • Transport Velocity 2250 FPM
  • Minimum Face Velocity 1766 FPM


  • Here are some general design velocities when using "ENCLOSING" Hoods: Mist CNC:
  • Minimum Face Velocity 75 FPM
  • Transport Velocity 2250 FPM
  • 11-015
    FLX Series (350/650 CFM)
    flx-series-portable-oil-coolant-mist-collector - Main Image
    FLX Series of mechanical oil mist filters with 99.9% HEPA filter efficiency. Particulate enters the unit and passes through several filter steps, as follows:
    • Impingement Disk
    • Metal Mesh Filter (washable)
    • Polyester Filter Mat (washable)
    • Impinger (washable)
    • Polyester Filter Mat (washable)
    • Metal Mesh Filter (washable)
    • Main Filter (self-draining)
    • HEPA After Filter (optional)
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    11-011
    Mobi-Oil Portable Filter - Self Draining Filters (600 CFM)
    mobi-oil-portable-coolant-mist-collector-with-extraction-arm - Main Image
    Mobi-oil is an easy to use, portable filter that extracts oil & coolant mist from lathes, milling machines, drill presses and other similar processes.

    This filter comes complete with a self-supporting extraction arm (7’ or 10’) with a simple to position extraction hood that allows the collection and filtration of mists and liquids, “at-source” before they have a chance to escape into the workplace. The collected contaminants are filtered by a series of specifically designed filters that allow the cleaned air to be returned back to the facility and the mist & liquids to drain into one (1) of two plastic containers. The collected liquids can then be reused in the machining process.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    11-008
    MP120 - Centrally Ducted - Self Draining Filters / Vertical Profile (Taller than wide) - Max Door Opening: 160 ft ² (12,000 CFM)
    mp120-oil-coolant-mist-collector - Main Image
    12000 CFM @ 2" ESP source capture industrial air cleaner (14’Wx14”Dx30”H) with mesh pre-filter, 95% Mist-Plus filter, and one 12” side inlet. Handing brackets furnished. It features two 2" aluminum mesh prefilters, sixteen Mist-Plus main filters, a 20 HP TEFC motor, a 28" dia. (max) inlet collar mounted on either side, and a 24" high leg stand
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    004 - Product Videos:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-005
    MP14 - Centrally Ducted - Self Draining Filters / Vertical Profile (Taller than wide) - Max Door Opening: 19 ft ² (1,400 CFM)
    mp14-oil-coolant-mist-collector - Main Image
    The Model MP14 is designed for medium-duty metalworking applications. It produces up to 1400 CFM with 95% filtration efficiency for single or multiple machine tool collection systems. This unit includes a 2" aluminum mesh pre-filter, 3 Mist-Plus main filters. Mounting angles to hang or surface mount unit and a 10" bottom inlet only (Use INLET PLENUM option for side back or front inlets).
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    003 - Client Installations - Case Studies with Photos:
    004 - Product Videos:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-006
    MP30 - Centrally Ducted - Self Draining Filters / Vertical Profile (Taller than wide) - Max Door Opening: 40 ft ² (3,000) CFM
    mp30-oil-coolant-mist-collector - Main Image
    The Model MP30 is designed for use in medium- to heavy-duty metalworking applications. It produces up to 3000 CFM with 95% filtration efficiency.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    004 - Product Videos:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-002
    MP4 - Direct machine mount - Self Draining Filters / Horizontal Profile (Wider than tall) - Max Door Opening: 7 ft ² (475 CFM)
    mp4-oil-coolant-mist-collector - Main Image
    The Model MP4 is designed for single-unit metalworking applications. It produces from 475 CFM with 95% filtration efficiency. It features a 1" aluminum mesh pre-filter, a Mist-Plus main filter, and a 3/4 HP BI blower TEFC motor. It includes the new removal bottom sump with 1.5" drain, mounting angles to hang or surface mount, and a 6" bottom inlet only. For side, back or front inlet see INLET PLENUM.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    003 - Client Installations - Case Studies with Photos:
    004 - Product Videos:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-007
    MP60 - Centrally Ducted - Self Draining Filters / Vertical Profile (Taller than wide) - Max Door Opening: 80 ft ² (6,000 CFM)
    mp-60-oil-coolant-mist-collector - Main Image
    6000 CFM source capture industrial air cleaner (14’Wx14”Dx30”H). It features a 2" aluminum mesh pre-filter, eight Mist-Plus main filters, a 10 HP TEFC motor, 24" high leg stand, and a 20" dia. (max) inlet collar mounted on either side or on back or 18" dia. (max) collar on front.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    003 - Client Installations - Case Studies with Photos:
    003a - Client Installations - Case Studies with Video:
    004 - Product Videos:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-025
    MPH-5 (500 CFM)
    mph5-oil-coolant-mist-collector - Main Image
    500 cfm source capture mist collector with (3) MIST-PLUS ™ II main filter with (1) MERV14 pleated synthetic, washable filter. (17.5" x 18.5" x 3.75"). ½ HP 115/1/60 Hz (7.2/3.6 amps) 71 dB, with rubber vibration isolator, or 208-230/460/3/60 Hz (2.6-2/1 amps), with a 8" COLLAR ON BOTTOM.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    11-004
    MPH10 - Direct machine mount - Self Draining Filters / Horizontal Profile (Wider than tall) - Max Door Opening: 14 ft ² (1,000 CFM)
    mph10-oil-coolant-mist-collector - Main Image
    The Mist-Pak® MPH10 low profile mist collector is designed to capture mist and smoke from various metalworking applications. The low profile design allows the unit to be installed directly above the machine tool in low ceiling applications. The collector produces up to 1000 CFM with 95%+ filtration efficiency for single or multiple machine tool collection systems.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    11-003
    MPH8 - Direct machine mount - Self Draining Filters / Horizontal Profile (Wider than tall) - Max Door Opening: 11 ft ² (800 CFM)
    mph-8-oil-coolant-mist-collector - Main Image
    The Mist-Pak® MPH8 low profile mist collector is designed to capture mist and smoke from various metalworking applications. The low profile design allows the unit to be installed directly above the machine tool in low ceiling applications. The collector produces up to 800 CFM with 95%+ filtration efficiency for single or multiple machine tool collection systems.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-045
    Multi-Flex Portable Mist collector c/w 10' long Flexi-II Arm
    multi-flex-portable-mist-collector - Main Image
    Efficient portable oil mist filter with superior FLEXI-II Extraction Arm
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    003 - Client Installations - Case Studies with Photos:
    003a - Client Installations - Case Studies with Video:
    11-009
    NOMEX - Ducted - Suitable for most Wet/Dry particulate or gas phase contaminants
    nomex-oil-mist-and-smoke-collector - Main Image
    The NOMEX© filter boasts a high degree of separation… When used for oil mists the Nomex boasts a 95% efficiency on oil mists and up to 99.9% of particulates. The Nomex is also well suited to handle Gas Phase applications with the use of activated media modules. The oil mist filters are considered "life-time" that last a minimum of 5 years while the activated media needs to be changed out (Refilled) when the media becomes saturated.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    006 - Local Exhaust and Ventilation Duct 3D Layouts:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-013
    istPac (600 CFM)
    mist-pac-oil-mist-wet-dust-air-cleaner - Main Image
    600 CFM Source capture industrial air cleaner. System is ideal for mixed DUST & MIST machining applications such as tool room or multipurpose machine shop applications.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-015
    1200 VOM (1200 CFM)
    1200-oil-mist-wet-dust-air-cleaner - Main Image
    1200 CFM source capture industrial air cleaner. It features a 2" impingement pre-filter, a 2" aluminum mesh filter, a 95% main filter (25 sq. ft of media), a one HP TEFC motor, and a 8" dia. inlet in front only.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-017
    2400 VOM (2400 CFM)
    2400-vom-oil-mist-wet-dust-air-cleaner - Main Image
    2400 CFM source capture industrial air cleaner. It features a 2" impingement pre-filter, a 2" aluminum mesh filter, a 95% main filter (88 sq. ft of media), a 1.5 HP motor, and a 12" dia. (max) inlet on the left side.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures:
    003 - Client Installations - Case Studies with Photos:
    004 - Product Videos:
    017 - LEV CAD Blocks (Auto CAD, RVT, SLDPRT):
    11-018
    OM-3510
    om-3510-coolant-mist-collector - Main Image
    Oil mist laden air flows through the inlet into the bottom of the unit where it turns 90 degrees. The air goes upward through the impinger, then the mesh prefilter, and finally through the special oil mist bag. Clean air is then discharged at the top of the unit. Oil drains out the bottom of the unit.
    Attachments
    001 - Equipment Specification and Dimension Drawings:
    002 - Brochures: