model_icon
(02-23) Roll-Flex-V - 700 to 1,400 CFM - VOC's and Odours - c/w 6.5 Extraction Arm **
This "V" version of the ROLL FLEX filter is ideally suited for most VOC, ODOUR, and SMALL SPRAY painting applications.

Product Function:

The air is pre-filtered with a washable particulate filter and then then treated by either a single or dual stage, "gas phase" adsorption media filter. This solution is compact, very flexible and comes complete with a 7’ or 10' extraction arm.

Construction:

Unit made of powder painted steel sheet. Fan 1.1 kw (1.5HP), 120 V/1/60, 2400 m³/hr. (1400 CFM). Impeller is non-sparking (aluminum) and the motor is installed out of the airstream and meets AMCA Sparkproof B & C ratings. This version of the Roll Flex comes standard with 4 casters (2 swivel/lockable), 1 Impingement baffle, 1 high capacity washable pre-filter, 1 canister for 18 lbs. of phase 1 adsorption media and a clean-out dust tray. Delivered complete with ON/OFF starter, cable, and plug.

Options:
  • 2nd stage (Dual Pass) gas phase filters
  • Custom adsorption media for filtering non-VOC gases
  • Extension hoods
  • Hazardous Locations certification

Shipping Dimensions and Weight:

Main System Part # Length x Width x Height Weight
RF-V-10 39"H x 24"W x 42"D 220 lbs
Part #
Qty 
Description
RF-V-10
Self-Cleaning ROLL FLEX cartridge filter; 1.1 kw (1.5hp), 120 V, 1400 CFM Complete with 3m (10') Extraction Arm.
  • AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
  • Frequently bought together these options:

    Part #
    Qty 
    Description
    WFSC-1.5HP-230-460
    Motor upgrade to 1.5HP @ 230-460V/3/60
    Part #
    Qty 
    Description
    H-SP-PA-200
    Light-weight spray paint hood Galvanized 28ga construction Cardboard paint arrester Used with (8") extraction Arm
    H-SP-PA-QC
    Light-weight spray paint hood Galvanized 28ga construction Cardboard paint arrester Used with P-003 extraction Arm Quick connect version with bungee attachment
    Part #
    Qty 
    Description
    VFD-AC-DA3P ON/OFF SWITCH
    3 Phase Power On/Off Switch Kit
    Part #
    Qty 
    Description
    RF-VOLT-230/3
    230 3 phase Motor upgrade for RF series Units
    Part #
    Qty 
    Description
    P-018-160-2MAG
    10' long 6.5" 250 deg. hose, hood & 2 magnets
    P-018-200-2MAG
    Extension hose for welding, 10' long 8" 250 deg. hose, hood & 2 magnets
    RELH-160/200
    **DISCONTINUED** Extension/receiving hood connects directly to the hood on all flexi series extraction arms. Conical hood extension (6" or 8" dia. inlet) 24" outside diameter,. 18G, Aluminum.
    SM-200
    Safety mesh for Flexi extraction arms and P-Max Fans.
    Part #
    Qty 
    Description
    C-RF-SCF-20
    "2nd Pass" Deep Bed Absorption module. Comes complete with 20 lbs. of activated carbon. Other adsorption Media's are available. Please note: this module is sold as an option.
    Technical Info Requested
    To make sure that you are a human being and not a robot, please also enter the letters you see below: