model_icon
(14-055-R1) Portable VE for Diesel trucks & Heavy Equipment
The P2D2, Portable Vehicle Exhaust System is an EASY TO POSITION solution for removal of diesel exhaust gases. Suited in areas where conventional exhaust systems cannot reach or exceed budgetary limits. (Patent Pending) The benefits of this solution are:
  • Powerful exhaust fan removes exhaust gases directly to atmosphere
  • One-person operation that allows the operator to position the nozzle on an OVERHEAD stack without the use of a ladder
  • Ability to service both overhead and under-carriage exhaust pipes
  • Sturdy trolley which allows for storage of all ventilation components
  • Locking casters ensures the base unit stays in place during use
  • Exhaust Port is easily located under the garage door or through an optional "Letter box" style port installed in the garage door
  • Base unit operates with standard 115V/1/60 power for use anywhere within a garage (higher Power and voltage units available)
  • Low Cost yet provides the ability to service the entire facility
  • Easy to store exhaust hose
  • Exhaust hose lengths available up to 100 feet and 2500 degrees F.
  • Do you need a BUDGETARY estimate?

    Scroll down and select the products using the "Qty" boxes when completing the form below.
    If available, please email me...

    To make sure that you are a human being and not a robot, please also enter the security word you see on the right in the box:
    Main System / Part
    Part # Qty  Description
    P2D2-R1-V2-BASE MODEL Portable Vehicle Exhaust system NO INLET HOSE OR MOTOR. System comes complete with:
  • 25' of 8" diameter exhaust hose
  • 15' power cord
  • Motor Starter and Overload protection
  • Storage for both the exhaust and inlet hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • P2D2-R3 Portable Vehicle Exhaust system. 1.5HP 115V/1/60. 1150 CFM System comes complete with:
  • 25' of 8" diameter exhaust hose
  • 10' of 6" diameter inlet hose
  • 6" to 8" diameter Vice-Grip nozzle - 600 degree silicon rubber for bottom exhaust
  • 6 to 10" diameter nozzle - 600 degree silicon hose for top exhaust
  • 15' power cord
  • Motor Starter and Overload protection
  • Storage for both the exhaust and inlet hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • P2D2-R3-FLEXI-200-10 Portable Vehicle Exhaust system. 1.5HP 115V/1/60. 1150 CFM System comes complete with:
  • 25' of 8" diameter exhaust hose
  • 10' FLEXII-8" (200mm) inlet extraction arm
  • 15' power cord
  • Motor Starter and Overload protection
  • Storage for exhaust hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • P2D2-R3-FLEXI-200-7 Portable Vehicle Exhaust system. 1.5HP 115V/1/60. 1150 CFM System comes complete with:
  • 25' of 8" diameter exhaust hose
  • 7' FLEXII-8" (200mm) inlet extraction arm
  • 15' power cord
  • Motor Starter and Overload protection
  • Storage for exhaust hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • PATRIOT-BM Base Model Portable Vehicle Exhaust system NO INLET HOSE OR MOTOR. System comes complete with:
  • Storage for both the exhaust and inlet hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • PATRIOT-HT-50'IN-66'EX Portable Vehicle Exhaust system with 50' 8" dia. inlet hose and 66' 10" diameter exhaust hose. MOTOR/FAN and VFD not included but selected as options. Please select voltage package within the "OPTIONS" section System comes complete with:
  • Motor Starter and Overload protection
  • Storage for both the exhaust and inlet hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • P2D2-R1 **Discontinued**Portable Vehicle Exhaust system. 1HP 115V/1/60. 1150 CFM System comes complete with:
  • 25' of 8" diameter exhaust hose
  • 10' of 6" diameter inlet hose
  • 6" to 8" diameter Vice-Grip nozzle - 600 degree silicon rubber for bottom exhaust
  • 6 to 10" diameter nozzle - 600 degree silicon hose for top exhaust
  • 15' power cord
  • Motor Starter and Overload protection
  • Storage for both the exhaust and inlet hoses
  • CSA approved AS PER CANADIAN LAW; this unit is approved by CSA field evaluation prior to shipping in order to meet Canadian Laws and for your additional safety
  • Fan / Motor Upgrades or Options (when ordering main unit)
    Part # Qty  Description
    PATRIOT-ELEC-10-1 Fan and electrical option for PATRIOT. 10HP @ 220V/3/60. Includes;
  • 10HP fan @ 220V
  • VFD rated for 10HP @ 220V
  • 60A Fuse Box (complete)
  • Twist lock weld plug rated for 220V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 60A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • PATRIOT-ELEC-10-2 Fan and electrical option for PATRIOT. 10HP @ 480V/3/60. Includes;
  • 10HP fan @ 480V
  • VFD rated for 10HP @ 480V
  • 30A Fuse Box (complete)
  • Twist lock weld plug rated for 480V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 30A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • PATRIOT-ELEC-10-3 Fan and electrical option for PATRIOT. 10HP @ 575V/3/60. Includes;
  • 10HP fan @ 575V
  • VFD rated for 10HP @ 575V
  • 30A Fuse Box (complete)
  • Twist lock weld plug rated for 575V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 30A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • PATRIOT-ELEC-7.5-1 Fan and electrical option for PATRIOT. 7.5HP @ 220V/3/60. Includes;
  • 7.5HP fan @ 220V
  • VFD rated for 7.5HP @ 220V
  • 60A Fuse Box (complete)
  • Twist lock weld plug rated for 220V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 60A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • PATRIOT-ELEC-7.5-2 Fan and electrical option for PATRIOT. 7.5HP @ 480V/3/60. Includes;
  • 7.5HP fan @ 480V
  • VFD rated for 7.5HP @ 480V
  • 30A Fuse Box (complete)
  • Twist lock weld plug rated for 480V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 30A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • PATRIOT-ELEC-7.5-3 Fan and electrical option for PATRIOT. 7.5HP @ 575V/3/60. Includes;
  • 7.5HP fan @ 575V
  • VFD rated for 7.5HP @ 575V
  • 30A Fuse Box (complete)
  • Twist lock weld plug rated for 575V
  • 50ft of cabtire
  • Low voltage HI/LOW/OFF switch
  • 30A mounting plate for VFD/fuse box
  • Pre-assembly of all electrical components wired and installed onto mounting plate
  • Hood Options
    Part # Qty  Description
    OM-071-MK-C Magnetic Hood-200mm (8)Ø. Two 40-lb magnets affixed to hood. Magnets can pivot to allow for a high range of motion whilst positioning the hood.
    Variable Frequency Drives
    Part # Qty  Description
    VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Fan Control Panels (when ordering main unit)
    Part # Qty  Description
    CAB-12/4-PL-480-50-30A cord and plug for up to 30 AMP 480V . 3 phase motors. includes connection to relevant disconnect and/ or starter. CSA Approved prior to shipping. 50ft of cable.
    CAB-12/4-PL-575-50-30A cord and plug for up to 30 AMP 575V . 3 phase motors. includes connection to relevant disconnect and/ or starter. CSA Approved prior to shipping. 50ft of cable.
    Caster Options
    Part # Qty  Description
    P2D2-R1-V2-PNEUMATIC-WHEEL 10 in. Pneumatic Swivel Caster. Kit includes QTY 4 wheels. 330lb capacity per wheel. Includes bracket to bolt onto P2D2-R1.
    Over-head Stack adapter - High Temperature Rubber
    Part # Qty  Description
    RCA-8/D 10" Diesel Stack Adapter with maunal damper - 8" opening for exhaust pipe
    Hose, Hood & Nozzle Options
    Part # Qty  Description
    LFD-12-50-HT 25' Exhaust hose x 12"dia. - Lay Flat Ducting - for Portable Fan
    Misc. Options (when ordering main unit)
    Part # Qty  Description
    LFD-14-50-HT 50' Exhaust hose x 14" dia. - Lay Flat Ducting - for Portable Fan
    Accessories
    Part # Qty  Description
    IN-RED-LIN-14-8 Reducer 14-8
    LFD-14-25-HT 25' Exhaust hose x 14" dia. - Lay Flat Ducting - for Portable Fan
    LFD-8-25-HT 25' Exhaust hose x 8dia. - Lay Flat Ducting - for Portable Fan with velcro(one end with 1"hook/one end with 1"loop).
    Hazardous location certifications and accessories
    Part # Qty  Description
    HAZLOC-CERT Hazardous Location Certification for equipment use in Class 1 Division 2. To include but not limited to the following:

    Hazardous location equipment Labeling

  • Approval Report
  • Certification Sticker
  • - Installation Accessories
    Part # Qty  Description
    GDDK-08-00-R0 Garage door - Door kit - 8"
    Spare Part (Call for quantity discount)
    Part # Qty  Description
    IN-DSE90-06-SHORT 6 diameter-90 degree elbow - Die Stamped-22 Gauge-short radius
    IN-RED-LIN-10-6 10 - 6 Duct Reducers, 22 Gauge. Stamped, Short body
    PVE-18-HAH Portable Vehicle Exhaust Adapter Handle

    Documentation: PVE-18-HAH