model_icon
(14-09) In-Groud In-Floor vehicle exhaust ventilation
“In-Ground” AKA “In-Floor” systems are systems that use a duct located below the floor, often embedded in concrete.
Considered “old school” by some, IN-GROUND systems will always have a place when selecting a vehicle exhaust solution.
The systems are broken down into 2 groups.
  • Under Floor: Hose is stored in the floor and pulled out as required.
  • On Floor: Hose is stored on a wall bracket and a “trap door” in the floor is opened and the hose is connected to the exposed inlet.

Product Function:

“In-Ground” AKA “In-Floor” systems are systems that use a duct located below the floor, often embedded in concrete.
Considered “old school” by some, IN-GROUND systems will always have a place when selecting a vehicle exhaust solution.
The systems are broken down into 2 groups.
  • Under Floor: Hose is stored in the floor and pulled out as required.
  • On Floor: Hose is stored on a wall bracket and a “trap door” in the floor is opened and the hose is connected to the exposed inlet.

Construction:

Part #
Qty 
Description
CAS-100
Cast Aluminum elbow for IN-FLOOR systems - In-ground component
CAS-200
Cast Aluminum elbow for IN-FLOOR systems - In-ground component
CPS-100
Cast Aluminum elbow for IN-FLOOR systems - Above floor component - 4" hose connection
CPS-125
Cast Aluminum elbow for IN-FLOOR systems - Above floor component - 5" hose connection
PAG-150
Cast Aluminum floor plate for IN-FLOOR systems -Surface component. 6" diameter
PAG-200
Cast Aluminum floor plate for IN-FLOOR systems -Surface component. 8" diameter

Frequently bought together these options:

Part #
Qty 
Description
VFD-KIT-3HP-220-230-3
3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
    • Part #
    Qty 
    Description
    PT-SFH-5
    Silicone fiberglass hose 5" dia.- not suitable for hose reels
  • sold per ft, 25ft min.
    • PT-SFH-6
    6" diameter 500 degree hose
    Part #
    Qty 
    Description
    PT-SFH-8
    silicone fiberglass hose 8 dia.-can we have this cut in two peices of 5'
    Technical Info Requested
    To make sure that you are a human being and not a robot, please also enter the letters you see below: