model_icon
(13-04) Portable P-Max - Optional Hose, Nozzles... - (600 -1,500 CFM)
P-Max© "Portable Local Exhaust" fans. Recommended for applications involving vehicle exhaust gases, welding fumes, smoke and light dust. An excellent portable solution where a fixed mounted system is not possible. These fans are designed specifically for "Medium Pressure" applications where the fan must be able to overcome the air resistance created when drawing contaminants through hoses.

Product Function:

P-Max© "Portable Local Exhaust" fans. Recommended for applications involving vehicle exhaust gases, welding fumes, smoke and light dust. An excellent portable solution where a fixed mounted system is not possible. These fans are designed specifically for "Medium Pressure" applications where the fan must be able to overcome the air resistance created when drawing contaminants through hoses.

Construction:

Complete with the following components:
  • Fan & motor assembly
  • Inlet and outlet flanges for hose connection
  • Mounting bracket/base
  • Lifting handle
Items not included but often required (Ordered as options):
  • Motor switch, overload, cord and/or plug
  • Inlet and outlet hoses
  • Hose clamps
  • Vehicle exhaust tailpipe nozzles
  • Magnetic welding nozzles
  • Wheel Kit

Shipping Dimensions and Weight:

Main System Part # Length x Width x Height Weight
LPF-P-149 30"H x 23"W x 27"D 50 lbs
Part #
Qty 
Description
LPF-P-149
Portable P-149 Fan c/w 1.5 HP 115/1/60 TEFC motor, 6 dia. inlet connection and 8 dia. outlet connection.Includes:
  • High Pressure Fan
  • TEFC Motor
  • Motor Starter and Overload protection
  • 15' Power cord
  • Mounting Bracket
  • Lifting Handle
  • Wheel Kit, Hose, etc. are available as options
  • Frequently bought together these options:

    Part #
    Qty 
    Description
    VOLT-230-460/3/60
    To indicate the voltage for the specified unit.
  • 208-230-460/3/60
  • Motor starter and power cord not included
  • VOLT-575/3/60
    To indicate the voltage for the specified unit.
  • 575/3/60
  • Motor starter and power cord not included
  • Part #
    Qty 
    Description
    MD-530-075-100
    3 Ø Bridge Clamp. Clamping range of 70mm-90mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-100-100
    4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
  • Looking at screw, the threaded section goes to the right.
  • MD-530-125-100
    5 Ø Bridge Clamp. Clamping range of 120mm-140mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-150-100
    6 Ø Bridge Clamp. Clamping range of 150mm-170mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-180-100
    7.2 Ø Bridge Clamp. Clamping range of 180mm-200mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-200-100
    8" Ø Bridge Clamp. Clamping range of 200mm-220mm
  • Looking at screw, the threaded section goes to right.
  • Part #
    Qty 
    Description
    HCS-3
    Gear Clamps HS48, 2.5" - 3.5"
    HCS-4
    Gear Clamps HS72, 3" - 5"
    HCS-5
    Gear Clamps HS88, 4" - 6"
    HCS-6
    Gear Clamps HS104-10, 5" - 7"
    HCS-7
    Gear Clamps HS116, 5.75" - 7.75"
    HCS-8
    Gear Clamps HS140, 7.5" - 9.5"
    Part #
    Qty 
    Description
    VFD-KIT-1HP-115-230-3
    1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3
    2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3
    3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Part #
    Qty 
    Description
    P-025-24S-120V-1PH-2HP
    Energy Saver E- Man© 120V/1/60. Fan Motor control station for 2 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights.
    Part #
    Qty 
    Description
    GPH-3
    3 Ø Flexible polyester, neoprene coated with wire. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum)
    GPH-4
    4 Ø polyester fabric, neoprene coated single ply w/wire reinforcement.. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F. Price per foot. (25' Length Minimum)
    GPH-5
    5 Ø polyester fabric, neoprene coated single ply w/wire reinforcement. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum)
    GPH-6
    6 Ø polyester fabric, neoprene coated single ply w/wire reinforcement.. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F. Price per foot. (25' Length Minimum)
    GPH-8
    8 Ø polyester fabric, neoprene coated single ply w/wire reinforcement. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum)
    Part #
    Qty 
    Description
    PT-SFH-3
    Silicone fiberglass hose 3" dia 500F continuous 600F intermediate.- not suitable for hose reels
  • sold per ft, 25ft min.
  • PT-SFH-4
    Silicone fiberglass hose 4" dia.- not suitable for hose reels
  • sold per ft, 25ft min.
  • PT-SFH-5
    Silicone fiberglass hose 5" dia.- not suitable for hose reels
  • sold per ft, 25ft min.
  • PT-SFH-6
    6" diameter 500 degree hose
    Part #
    Qty 
    Description
    WYE-HT-644-D
    WYE adaptor kit containing two (2) 4" dia. extension hoses 4'(1.2M') of 600 degree hose, two (2) nozzles WITH DAMPERS c/w chain, hook and suction cup.
  • Please note: This kit can connect to any existing 6" hose OR "Quick-connect" to any Lev-co 6" Nozzle OR Extraction arm hood.
  • YA400
    4 dia. Y Dual drop kit c/w 2 drops 4' length and tailpipe adapters
    Part #
    Qty 
    Description
    SRF-4
    4" Rubber nozzle with vice grip - 6" opening
    SRF-5
    5" Rubber nozzle with vice grip - 8" opening
    SRF-6
    6" Rubber nozzle with vice grip - 8" opening
    SRF-8
    8 Rubber nozzle with vice grip - 10 opening
    Part #
    Qty 
    Description
    2TL0-9005
    3" Oval Tailpipe Connector w/toggle clamp & CO2 port.
    3TL0-9007
    6i" rubber diesel stack connector with 6in duct connection with toggle clamp.
    Part #
    Qty 
    Description
    R-060
    Inlet Ø125 galvanized, 8 bolts M8 x 125mm. (5")
    R-061
    Inlet Ø150/160 powder coated black, 8 bolts M8 x 16mm. Packed in plastic.
    R-062
    Inlet Ø200/8" powder coated black, 8 bolts M8 x 16mm.
    R-063
    Inlet Ø100 powder coated black, 8 bolts M8 x 16mm.
    R-064
    Inlet Ø75 powder coated black, 8 bolts M8 x 16mm.
    Part #
    Qty 
    Description
    FLT-HTH-25-8
    25' length High Temp. Flat Hose 8 dia
    LEV-P-018-160-4MAG
    10' long 6.5" 250 deg. hose, hood & 4 magnets
    LEV-P-018-200-4MAG
    10' long 8" 250 deg. hose, hood & 4 magnets
    P-018-160-2MAG
    10' long 6.5" 250 deg. hose, hood & 2 magnets
    P-018-200-2MAG
    Extension hose for welding, 10' long 8" 250 deg. hose, hood & 2 magnets
    Part #
    Qty 
    Description
    2HD7-7527
    Adapter, "y" painted, 3"x3"x3"
    2KT7-7701
    Diesel Stack Cane w/ 6" inlet connection.
    Part #
    Qty 
    Description
    PG-10
    Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    Technical Info Requested
    To make sure that you are a human being and not a robot, please also enter the letters you see below: