model_icon
(04-07) HWF Wet Collector - Explosive Dusts - Self cleaning filter system built in - 1,000 to 15,000 CFM **
HYDROTRON Water Filter Dust Collectors purify air by a combination of centrifugal force and violent mixing of water and contaminated air. As the air stream passes the fixed baffles, particulate is separated by heavy, turbulent curtain of water created by high velocity air. The centrifugal force caused by the rapid changes in airflow direction forces the dust particles to penetrate the water droplets and become entrapped. Contaminated water is then removed from the airstream by special mist filters. Dust, as sludge, settles to the collector bottom and the water is reused.
The HYDROTRON is specifically designed for safe collection of potentially explosive and volatile materials and is effective in the capture of fine metal particles. It meets the National Fire Protection Association guidelines for processing and finishing aluminum. Since the Hydrotron also meets OSHA and NFPA regulations for dust removal located inside buildings, it can recirculate in-plant, tempered air to conserve energy.

Product Function:

HYDROTRON Water Filter Dust Collectors purify air by a combination of centrifugal force and violent mixing of water and contaminated air. As the air stream passes the fixed baffles, particulate is separated by heavy, turbulent curtain of water created by high velocity air. The centrifugal force caused by the rapid changes in airflow direction forces the dust particles to penetrate the water droplets and become entrapped. Contaminated water is then removed from the airstream by special mist filters. Dust, as sludge, settles to the collector bottom and the water is reused.
The HYDROTRON is specifically designed for safe collection of potentially explosive and volatile materials and is effective in the capture of fine metal particles. It meets the National Fire Protection Association guidelines for processing and finishing aluminum. Since the Hydrotron also meets OSHA and NFPA regulations for dust removal located inside buildings, it can recirculate in-plant, tempered air to conserve energy.

Construction:

Standard Features
  • Galvanized Steel Construction with Two-Part Cold Tar Epoxy Coatings to all Interior Wet Surfaces
  • Industrial Enamel "Lev-co Blue" Coating on Exterior
  • Direct Drive/Non-overloading Fan with TEFC Motors, Single and Three Phase
  • Magnehelic Gauge
  • Automatic Fill System
  • Magnetic Motor starter with push button on/off and overload protection
  • Low water cut-off switch
  • Overflow water cut-off switch
Optional Features (Not included in this quote unless specified in the Quote details & Selected Options)
  • Spark Resistant Blower
  • 95% ASHRAE Safety Filter
  • 99.97% HEPA Safety Filter
  • Sludge Conveyor (Galvanized Steel and Stainless Steel)
  • Stainless Steel construction

Shipping Dimensions and Weight:

Main System Part # Length x Width x Height Weight
MICROA WC5000 39"H x 52"W x 72"D 1400 lbs
MICROA WC2500 72.5"H x 26"W x 38"D 520 lbs
MICROA WC1200 63"H x 20"W x 30"D 380 lbs
LEV-WFDC1-10-3 35"H x 35"W x 35"D 150 lbs
Part #
Qty 
Description
LEV-WFDC1-10-3
1000 CFM@4 ESP Hydrotron Water Filter Dust Collectors c/w 3 HP motor, low water cut -off switch and overflow water cut off switch. (95”H x 34”W x 40”D, 1000 lbs.)
LEV-WFDC2-20-3
2000 CFM@4" ESP Hydrotron Water Filter Dust Collectors c/w 3 HP motor, low water cut off switch and overflow water cut off switch (95”H x 34”W x 40”D, 1100 lbs.)
LEV-WFDC2-20-5
2000 CFM Ducted Wet Collector 5 HP Blower
LEV-WFDC3-30-5
3000 CFM@4" ESP Hydrotron Water Filter Dust Collectors c/w 5 HP motor, low water cut off switch and overflow water cut off switch (95”H x 36”W x 46”D, 1200 lbs.)
LEV-WFDC4-40-7.5
4000 CFM@4" ESP Hydrotron Water Filter Dust Collectors c/w 7.5 HP motor, low water cut off switch and overflow water cut off switch (95”H x 40”W x 48”D, 1300 lbs.)
LEV-WFDC5-50-10
5000 CFM@4 ESP Hydrotron Water Filter Dust Collectors c/w 10 HP motor, low water cut off switch and overflow water cut off switch (95”H x 46”W x 58”D, 1400 lbs.)
LEV-WFDC6-70-25
7000 CFM@4 ESP Hydrotron Water Filter Dust Collectors c/w 15 HP motor, low water cut off switch and overflow water cut off switch (9.5”H x 48”W x 72”D, 1680 lbs.)
LEV-WFDC-9-150-40
15000CFM; 30HP 15000 CFM@4" ESP Hydrotron Ducted Wet Collector/w 40 HP blower. (132”H x 60”W x 106”L, 4020LBS)
MICROA WC1200
Capture of explosive metal dusts - down draft tables, 1000CFM, 2HP
MICROA WC2500
Capture of explosive metal dusts, wet collector - down draft table option, 2300CFM, 5HP
MICROA WC5000
Capture of explosive metal dusts, wet collector - 5000CFM @2" external static pressure
WC1200
1200 CFM@4ESP Hydro Max Wet Collector, 2HP, 460V 3Phase. with Gravity Sump Damper, Wet Table Conversion Kit. This was originally called 'WC1200' when it was added as a custom product by the sales rep.

Frequently bought together these options:

Part #
Qty 
Description
LEV-CHEV-FILTER
Impingment cheveron filter
LEV-WFDC1-10-3-95SF
Safety filter with 95% ASHRAE (mini pleat) and magnehelic gauge for F1-HWF1-10-3
LEV-WFDC1-10-3-99.97SF
Safety filter with 99.97% HEPA and magnehelic gauge for F1-HWF1-10-3
LEV-WFDC2-20-3-95SF
Safety filter with 95% ASHRAE (mini pleat) and magnehelic gauge for F1-HWF2-10-3
LEV-WFDC2-20-3-99.97SF
Safety filter with 99.97% HEPA and magnehelic gauge for F1-HWF2-20-3
LEV-WFDC3-30-5-95SF
Safety filter with 95% ASHRAE (mini pleat) and magnehelic gauge for F1-HWF3-30-5
LEV-WFDC3-30-5-99.97SF
Safety filter with 99.97% HEPA and magnehelic gauge for F1-HWF3-30-5
LEV-WFDC4-40-7.5-95SF
Safety filter with 95% ASHRAE (mini pleat) and magnehelic gauge for F1-HWF4-40-7.5
LEV-WFDC4-40-7.5-99.97SF
Safety filter with 99.97% HEPA and magnehelic gauge for F1-HWF4-40-7.5
LEV-WFDC5-50-10-95SF
Safety filter with 95% ASHRAE (mini pleat) and magnehelic gauge for F1-HWF5-50-10
LEV-WFDC5-50-10-99.97SF
Safety filter with 99.97% HEPA and magnehelic gauge for F1-HWF5-50-10
Part #
Qty 
Description
VFD-KIT-1HP-115-230-3
1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-3HP-220-230-3
    3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Part #
    Qty 
    Description
    LEV-MC-PG-5
    Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10
    Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    Technical Info Requested
    To make sure that you are a human being and not a robot, please also enter the letters you see below: