Image for solution 85

Industrial Hose & Duct Work

Lev-Co offers a wide variety of lightweight, flexible, abrasive resistant, heat tolerant, innovative technical hoses to provide solutions for a wide range of industrial & Automotive applications. Here are some general design velocities when using "CAPTURE" Hoods: Smoke (e.g. Welding):
  • Capture Velocity 100 FPM
  • Transport Velocity 3000 FPM
  • Minimun Face velocity 2355 FPM Dust (e.g. Grinding):
  • Capture Velocity 500 FPM
  • Transport Velocity 4000 FPM
  • Minimun Face Velocity 4000 FPM Gas (e.g. V.O.C.'s):
  • Capture Velocity 50 FPM
  • Transport Velocity 2000 FPM
  • Minimun Face Velocity 785 FPM Mist:
  • Capture Velocity 100 FPM
  • Transport Velocity 2250 FPM
  • Minimun Face Velocity 1766 FPM FOR MORE SUPPORT IN SELECTING THE RIGHT HOSE pls EMAIL us with details on your application at: sales@lev-co.com
  • (16-001) Spiral Ducts & Installation Accessories
    Image for Model 712
    (16-01) GPH General Duty Hose - Dust, Fume, Smoke (275°F)
    Image for Model 694
    GPH - Lightweight TPR coated polyester fabric w/wire reinforcement. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F. Price per foot. (10' Length Minimum)
    Attachments
    017 - DWG and RVT models:
    (16-02) OM-AB-260 - Oil Mists and Abrasive dusts (260°F)
    Image for Model 297
    Ideally suited for conveying oil mist from machining processes and many applications where a flexible, chemical and abrasion resistant hose is required. Wire reinforced, very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR.
    (16-03) LT-300 Vehicle Exhaust Hose - Vehicle Emissions (300°F) GPH
    Image for Model 365
    This hose is well suited for low temp vehicle exhaust gases, medium duty dust collection and a variety of fume applications where external abrasion resistance is required (e.g.: dragging the hose across the floor.) Santoprene coated polyester fabric w/wire reinforcement. Spring steel wire w/ external wear strip. Temp range of – 60 F to 300 F.
    (16-04) HRHT-850 Vehicle Exhaust - Vehicle Emissions Hose reels (850°F)
    Image for Model 434
    Pyroflex© hose has been specifically designed for demanding high temperature “Process Ventilation” applications such a diesel exhaust and many other high temperature applications.



    This hose has the following features :



  • long Life -> Abrasion resistant both externally and internally
  • High temperature resistance -> 850 degrees F under normal use and intermittently up to 2000 degrees F
  • low pressure drop -> with very smooth internal bore
  • Light weight -> easy to use and place into position
  • fatigue resistant -> ideal for constant flexing applications such as hose reels and retraction systems
  • (16-045) HRHT-600-SNH Vehicle Exhaust - Vehicle Emissions Hose reels (600°F)
    Silicon Nomex hose has been specifically designed for demanding high temperature “Process Ventilation” applications such a diesel exhaust and many other high temperature applications up to 600 degrees F.



    This hose has the following features :



  • long Life -> Abrasion resistant both externally and internally
  • High temperature resistance -> 600 degrees F
  • low pressure drop -> with very smooth internal bore
  • Light weight -> easy to use and place into position
  • fatigue resistant -> ideal for constant flexing applications such as hose reels and retraction systems
    Attachments
    017 - DWG and RVT models:
  • (16-05) LWHT-600 Vehicle Exhaust Hose - Vehicle Emissions Light Weight (600°F) SFH1
    Image for Model 564
    Silicone Fiberglass duct suitable for high temperature 600°F vehicle exhaust control.




    1 ply Silicone/Fiberglass Hose

    2 plies for added service life. A popular style for stationary high temperature exhaust control applications. *Not for use with garage hose reels

    (16-06) MWHT-600 Vehicle Exhaust Hose - Vehicle Emissions Medium Weight (600°F) SFH2
    Image for Model 334
    Material

    hose wall: two-layers, inner and outer layer special-coated high temperature fabric

    external helix: galvanized steel


    Processes

    • Hot air

    • Suction plants

    • Vehicle Exhaust
    (16-07) HWHT-600 Vehicle Exhaust Hose - Vehicle Emissions High Weight (600°F)
    Image for Model 676
    Material

    hose wall: two-layers, inner and outer layer special-coated high temperature KEVLAR fabric

    external helix: galvanized steel


    Processes:

    • Hot air

    • Suction plants

    • Vehicle Exhaust
    (16-08) HWHT-750 Hose Vehicle Exhaust Hose - Vehicle Emissions High Weight (750°F)
    Image for Model 336
    MD-Master-Clip HT 750

    Material

    hose wall: special-coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire

    external helix: galvanized steel


    Processes

    • Hot air

    • Suction plants

    • Furnace
    (16-09) HWHT-1000 Vehicle Exhaust Hose - Vehicle Emissions High Weight (1000°F)
    Image for Model 337
    MD-Master-Clip HT 1000

    High temperature Silicon coated glass fabric asbestos free reinforced in galvanized or stainless steel wire. Excellent high temp resistance hose high flexibility can handle up to 1000 degrees. Temp range – 5° F to 1000° F. Suitable for vehicle exhaust systems; high temperature diesel exhaust.



    Material

    hose wall: special-coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire

    external helix: galvanized steel

    (16-10) - MD-Master-Clip HT 1200 (Vehicle Exhaust - 1200°F)
    Image for Model 338
    2-layer special coated high temp fabric reinforced in stainless steel wire is the best and most widely used 1200° F range flexible hose on the market. This hose is perfect for dynos and high performance engines. Temp range – 75F to 1200°F.

    Price per ft. (10' Length Minimum)
    Material

    Hose Wall: two layer
    Attachments
    001 - Spec Drawings:
    007 - Written Specifications:
    017 - DWG and RVT models:
    (16-11) - MD-Master-Clip HT 1500 (Vehicle Exhaust - 1500°F)
    Image for Model 657
    2-layer special coated high temp fabric reinforced in stainless steel wire is the best and most widely used 1500° F range flexible hose on the market. This hose is perfect for dynos and high performance engines. Temp range – 75F to 1500°F.

    Price per ft. (10' Length Minimum)
    Material

    Hose Wall: two layer
    Attachments
    017 - DWG and RVT models:
    (16-12) - MD-Master-Clip HT 2010 (Vehicle Exhaust - 2010°F)
    Image for Model 339
    3-layer special coated high temp fabric reinforced w/inside layer of stainless steel mesh makes this a very strong and flexible hose, excellent for high performance and massive engines- buses, trucks, jets.

    Price per ft. (10' Length Minimum)



    Material

    hose wall: three-layer
    Attachments
    001 - Spec Drawings:
    007 - Written Specifications:
    017 - DWG and RVT models:
    (16-20) ECH-260 - Electrically Conductive Hoses - Explosive Dusts and Vapours (260°F)
    Image for Model 309
    MD-Master-Pur L-EC

    Material

    hose wall: Electrically Conductive POLYURETHANE

    spiral: PU-coated spring steel wire


    Applications

    • Dangerous areas, where electrical conductivity is demanded

    • Special hose for industrial vacuum cleaners

    • Suction and transport of paper fibers and wood chips

    • Transport of granules

    • Suction and transport of abrasive materials, gaseous and liquid media

    • Extraction of coarse-grained particles with high flow volume

    • Oil-spray extraction

    • Protection hose against mechanical damage


    Properties

    • Surface resistance RO<=104 Ohm

    • Electrically conductive

    • Abrasion-resistant

    • Very flexible, lightweight

    • Small bend radius

    • Resistant to oil and fuels, gas-tight

    • Free of plasticisers and halogens

    • Good chemical resistance

    • UV- and ozone-resistant

    • Improved pressure and vacuum characteristics

    • High tensile and burst strength

    • Optimum flow characteristics
    (16-21) IEH-2000-HT
    Image for Model 838
    Standard 25ft length (Custom lengths available on request). Flame/water resistant, extremely flexible, 3 Ply construction, no glues or adhesives. Ideal for vehicle exhaust and high temperature fume extraction
    Attachments
    017 - DWG and RVT models:
    (16-25) Hose Accessories
    Image for Model 548
    Hose Accessories
    (16-26) - Self-Supporting Fume & Dust Extraction Hose - 200°F
    Image for Model 451
    Fume Extractor: hose used for spot extraction of fume/dust removal. White in colour.
    Priced per foot.
    Attachments
    001 - Spec Drawings:
    017 - DWG and RVT models: