model_icon
(14-09) In-Groud In-Floor vehicle exhaust ventilation
“In-Ground” AKA “In-Floor” systems are systems that use a duct located below the floor, often embedded in concrete.
Considered “old school” by some, IN-GROUND systems will always have a place when selecting a vehicle exhaust solution.
The systems are broken down into 2 groups.
  • Under Floor: Hose is stored in the floor and pulled out as required.
  • On Floor: Hose is stored on a wall bracket and a “trap door” in the floor is opened and the hose is connected to the exposed inlet.

    • Do you need a BUDGETARY estimate?

    Scroll down and select the products using the "Qty" boxes when completing the form below.
    If available, please email me...

    To make sure that you are a human being and not a robot, please also enter the security word you see on the right in the box:
    Main System / Part
    Part # Qty  Description
    CAS-100 Cast Aluminum elbow for IN-FLOOR systems - In-ground component
    CAS-200 Cast Aluminum elbow for IN-FLOOR systems - In-ground component
    CPS-100 Cast Aluminum elbow for IN-FLOOR systems - Above floor component - 4" hose connection
    CPS-125 Cast Aluminum elbow for IN-FLOOR systems - Above floor component - 5" hose connection
    PAG-150 Cast Aluminum floor plate for IN-FLOOR systems -Surface component. 6" diameter
    PAG-200 Cast Aluminum floor plate for IN-FLOOR systems -Surface component. 8" diameter
    600° Vehicle Exhaust Hose (Price/foot)
    Part # Qty  Description
    PT-SFH-5 Silicone fiberglass hose 5" dia.- not suitable for hose reels
  • sold per ft, 25ft min.
    		•
    PT-SFH-6 6" diameter 500 degree hose
    Hose with temp range up to 850°F (455°C)
    Part # Qty  Description
    PT-SFH-8 silicone fiberglass hose 8 dia.-can we have this cut in two peices of 5'