| Main System / Part |
| Part # |
Qty |
Description |
| LPF-P-149 |
|
Portable P-149 Fan c/w 1.5 HP 115/1/60 TEFC motor, 6 dia. inlet connection and 8 dia. outlet connection.Includes: High Pressure Fan
TEFC Motor
Motor Starter and Overload protection
15' Power cord
Mounting Bracket
Lifting Handle
Wheel Kit, Hose, etc. are available as options |
| Voltage Options |
| Part # |
Qty |
Description |
| VOLT-230-460/3/60 |
|
To indicate the voltage for the specified unit.
208-230-460/3/60
Motor starter and power cord not included |
| VOLT-575/3/60 |
|
To indicate the voltage for the specified unit.
575/3/60
Motor starter and power cord not included |
| Hose Clamps - Bridge style |
| Part # |
Qty |
Description |
| MD-530-075-100 |
|
3 Ø Bridge Clamp. Clamping range of 70mm-90mm
Looking at screw, the threaded section goes to right. |
| MD-530-100-100 |
|
4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
Looking at screw, the threaded section goes to the right. |
| MD-530-125-100 |
|
5 Ø Bridge Clamp. Clamping range of 120mm-140mm
Looking at screw, the threaded section goes to right. |
| MD-530-150-100 |
|
6 Ø Bridge Clamp. Clamping range of 150mm-170mm
Looking at screw, the threaded section goes to right. |
| MD-530-180-100 |
|
7.2 Ø Bridge Clamp. Clamping range of 180mm-200mm
Looking at screw, the threaded section goes to right. |
| MD-530-200-100 |
|
8" Ø Bridge Clamp. Clamping range of 200mm-220mm
Looking at screw, the threaded section goes to right. |
| Hose Clamps |
| Part # |
Qty |
Description |
| HCS-3 |
|
Gear Clamps HS48, 2.5" - 3.5"
|
| HCS-4 |
|
Gear Clamps HS72, 3" - 5" |
| HCS-5 |
|
Gear Clamps HS88, 4" - 6" |
| HCS-6 |
|
Gear Clamps HS104-10, 5" - 7" |
| HCS-7 |
|
Gear Clamps HS116, 5.75" - 7.75"
|
| HCS-8 |
|
Gear Clamps HS140, 7.5" - 9.5"
|
| Fan Control Panels (when ordering main unit) |
| Part # |
Qty |
Description |
| P-025-24S-120V-1PH-2HP |
|
Energy Saver E- Man© 120V/1/60. Fan Motor control station for 2 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| Hose with temp range up to 300°F (150°C) |
| Part # |
Qty |
Description |
| GPH-3 |
|
3 Ø Flexible polyester, neoprene coated with wire. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum) |
| GPH-4 |
|
4 Ø polyester fabric, neoprene coated single ply w/wire reinforcement.. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F. Price per foot. (25' Length Minimum) |
| GPH-5 |
|
5 Ø polyester fabric, neoprene coated single ply w/wire reinforcement. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum) |
| GPH-6 |
|
6 Ø polyester fabric, neoprene coated single ply w/wire reinforcement.. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F. Price per foot. (25' Length Minimum) |
| GPH-8 |
|
8 Ø polyester fabric, neoprene coated single ply w/wire reinforcement. Excellent general purpose hose, somewhat more durable than TPR film hoses. Very good for low temp vehicle exhaust applications. Temp range of 60F - 275F, intermittent to +300F. Price per foot. (25' Length Minimum) |
| Hose with temp range up to 600°F (315°C) |
| Part # |
Qty |
Description |
| PT-SFH-3 |
|
Silicone fiberglass hose 3" dia 500F continuous 600F intermediate.- not suitable for hose reels
sold per ft, 25ft min. |
| PT-SFH-4 |
|
Silicone fiberglass hose 4" dia.- not suitable for hose reels
sold per ft, 25ft min. |
| PT-SFH-5 |
|
Silicone fiberglass hose 5" dia.- not suitable for hose reels
sold per ft, 25ft min. |
| PT-SFH-6 |
|
6" diameter 500 degree hose |
| Hose Adapter |
| Part # |
Qty |
Description |
| WYE-HT-644-D |
|
WYE adaptor kit containing two (2) 4" dia. extension hoses 4'(1.2M') of 600 degree hose, two (2) nozzles WITH DAMPERS c/w chain, hook and suction cup.
Please note: This kit can connect to any existing 6" hose OR "Quick-connect" to any Lev-co 6" Nozzle OR Extraction arm hood.
|
| YA400 |
|
4 dia. Y Dual drop kit c/w 2 drops 4' length and tailpipe adapters
|
| Under Carriage Rubber Tailpipe Adapters c/w Vice Grip (Suitable for Round or Oval Tailpipes) |
| Part # |
Qty |
Description |
| SRF-4 |
|
4" Rubber nozzle with vice grip - 6" opening |
| SRF-5 |
|
5" Rubber nozzle with vice grip - 8" opening |
| SRF-6 |
|
6" Rubber nozzle with vice grip - 8" opening |
| SRF-8 |
|
8 Rubber nozzle with vice grip - 10 opening |
| Nozzle Accessories |
| Part # |
Qty |
Description |
| 2TL0-9005 |
|
3" Oval Tailpipe Connector w/toggle clamp & CO2 port. |
| 3TL0-9007 |
|
6i" rubber diesel stack connector with 6in duct connection with toggle clamp. |
| Hose Connectors and Fittings |
| Part # |
Qty |
Description |
| R-060 |
|
Inlet Ø125 galvanized, 8 bolts M8 x 125mm. (5") |
| R-061 |
|
Inlet Ø150/160 powder coated black, 8 bolts M8 x 16mm. Packed in plastic. |
| R-062 |
|
Inlet Ø200/8" powder coated black, 8 bolts M8 x 16mm. |
| R-063 |
|
Inlet Ø100 powder coated black, 8 bolts M8 x 16mm. |
| R-064 |
|
Inlet Ø75 powder coated black, 8 bolts M8 x 16mm. |
| Hose, Hood & Nozzle Options |
| Part # |
Qty |
Description |
| FLT-HTH-25-8 |
|
25' length High Temp. Flat Hose 8 dia |
| LEV-P-018-160-4MAG |
|
10' long 6.5" 250 deg. hose, hood & 4 magnets |
| LEV-P-018-200-4MAG |
|
10' long 8" 250 deg. hose, hood & 4 magnets |
| P-018-160-2MAG |
|
10' long 6.5" 250 deg. hose, hood & 2 magnets |
| P-018-200-2MAG |
|
Extension hose for welding, 10' long 8" 250 deg. hose, hood & 2 magnets |
| Misc. Options |
| Part # |
Qty |
Description |
| EXTERIOR FAN COVER |
|
Exterior fan cover for P-147, P-148, P-149, P-151, P-152, P-153 when mounted with motor facing upward. |
| Misc. Options (when ordering main unit) |
| Part # |
Qty |
Description |
| P-025-12S-575V-3PH-10HP |
|
Energy Saver E- Man© 575V/3/60. Fan Motor control station for 10 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 12V AC transformer for powering devices such as halogen Lights. |
| Accessories |
| Part # |
Qty |
Description |
| 2HD7-7527 |
|
Adapter, "y" painted, 3"x3"x3" |
| 2KT7-7701 |
|
Diesel Stack Cane w/ 6" inlet connection. |
| Fan Mounting Brackets |
| Part # |
Qty |
Description |
| P-766-HD-GALV |
|
Heavy duty galvanized fan mounting bracket w/ hardware to connect fan. |
| Hazardous location certifications and accessories |
| Part # |
Qty |
Description |
| HAZLOC-CERT-EXISTING-EQUIP |
|
Hazardous Location Certification for equipment use in Class 1 Division 2. To include but not limited to the following:
Hazardous location equipment Labeling
Approval Report
Certification Sticker
USED FOR AN EXISTING IDENTICAL UNIT THAT HAS ALREADY BEEN CERTIFIED BY LABTEST. |
| HAZLOC-CERT-NEW-EQUIPMENT |
|
Hazardous Location Certification for equipment use in Class 1 Division 2. To include but not limited to the following:
Hazardous location equipment Labeling
Approval Report
Certification Sticker |
| Preventative Maintenance Pressure Gauges, etc. (when ordering main unit) |
| Part # |
Qty |
Description |
| PG-10 |
|
Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately. |
| - Installation Accessories |
| Part # |
Qty |
Description |
| PDK-8-SS |
|
Industrial grade duct kit for direct exhausting of P-Max fans - for Wall exhaust c/w the following parts:
2 pcs - 24" - 8" diameter lateral duct
-1 pc - 8" diameter long radius elbow
-1 pc - 8" exhaust fitting
-45 degree weather elbow
-backdraft damper
-bird screen
16" X 16" exterior wall flashing |
| Spare Part (Call for quantity discount) |
| Part # |
Qty |
Description |
| 2TL0-9007 |
|
6in rubber diesel stack connector with 6in duct connection. |
| 2TL0-9009 |
|
4.5 Oval Tailpipe Connector w/toggle clamp & CO2 port. |
| 2TL0-9019 |
|
4.5 Standard Tailpipe Connector, Less Toggle Clamp. |
| 2TL0-9022 |
|
3" oval tail pipe connector, less toggle clamp. |
