| Low Temp Hose Drop |
| Part # |
Description |
| SER-4-LT |
4" VE single exhaust extractor c/w 6m (20 ft.) 250° F hose, saddle, rope and pulley kit. |
| SER-5-LT |
5 VE single exhaust extractor c/w 6m (20 ft.) 250° F hose, saddle, rope and pulley kit. |
| SER-6-LT |
6 VE single exhaust extractor c/w 6m (20 ft.) 250° F hose, saddle, rope and pulley kit. |
| SER-8-LT |
8 VE single exhaust extractor c/w 6m (20 ft.) 250° F hose, saddle, rope and pulley kit. |
| High Temp Hose Drop |
| Part # |
Description |
| SER-4-HT |
4 VE single exhaust extractor c/w 6m (20 ft.) 850 F hose, saddle, rope and pulley kit. |
| SER-5-HT |
5 VE single exhaust extractor c/w 6m (20 ft.) 850 F hose, saddle, rope and pulley kit. |
| SER-6-HT |
6 VE single exhaust extractor c/w 6m (20 ft.) 850 F hose, saddle, rope and pulley kit. |
| SER-8-HT |
8 VE single exhaust extractor c/w 6m (20 ft.) 850 F hose, saddle, rope and pulley kit. |
| Direct Mount Fans - 0.5 HP - (Motor Starter not included) |
| Part # |
Description |
| P-147-1 |
P-Max direct drive fan 0.5 HP 115V/1/60
100% weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| P-147-2 |
P-Max direct drive fan 0.5 HP 115-230V/1/60. |
| P-147-3 |
P-Max direct drive fan 0.5 HP 208-230-460V/3/60. |
| P-147-4 |
P-Max direct drive fan 0.5 HP 575V/3/60. |
| Direct Mount Fans - 0.75 HP - (Motor Starter not included) |
| Part # |
Description |
| P-148-1 |
P-Max© direct drive fan 0.75 HP 115-230V/1/60. |
| P-148-2 |
P-Max© direct drive fan 0.75 HP 208-230V/460V/3/60. |
| P-148-3 |
P-Max© direct drive fan 0.75 HP 575V/3/60.
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| Direct Mount Fans - 1.0 HP - (Motor Starter not included) |
| Part # |
Description |
| P-149-2 |
P-Max© direct drive fan 1 HP 208-230V/460V/3/60...
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| P-149-3 |
P-Max© direct drive fan 1 HP 575-600V/3/60...100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| Direct Mount Fans - 1.5 HP - (Motor Starter not included) |
| Part # |
Description |
| P-149-4 |
P-Max© direct drive fan 1.5 HP |
| P-152-1 |
P-Max© direct drive fan 1.5 HP 115V/230V/1/60 (use 2HP motor when the TSP is less than 4 w.g.)
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| P-152-3 |
P-Max© direct drive fan 1.5 HP 575-600V/3/60 (use 2HP motor when the TSP is less than 4 w.g.)
Please specify 1.5 or 2 HP
If you need 2HP, please use P-152-3-2HP
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge.
|
| P-154-1.5HP-1 |
**DO NOT USE**P-Max© direct drive fan 1.5 HP 115-230V/1/60
Note: Must not be used below 8" SP
100% Weather-proof and can me mounted outdoors/rooftop. Fans are able to be rotated at 45deg increments to allow for angular up/down discharge"
|
| Direct Mount Fans - 2.0 HP - (Motor Starter not included) |
| Part # |
Description |
| P-153-1 |
2.0 HP direct drive fan 115/230/1/60 with BI self cleaning aluminum wheel, AMCA type B spark resistance (1200CFM@5 wg), 30 Amp service/breaker (time delay) required
If direct mounting to a Hose reel, extraction arm, brackets P-045, P-151, or wall flex you will require a flange P-153-FL
The required wire grade size #10 Minimum
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| P-153-2 |
2 HP direct drive fan 208-230/460/3/60 with BI (cast) aluminum wheel with self cleaning blades, AMCA type B spark resistance construction (rated for 1200CFM@5 w.g.)
If you are direct mounting this fan to a hose reel, extraction arm, brackets P-045, P-151, or wall flex you will need to order an additional flange part number P-153-FL
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
| Hose Clamps - Bridge style |
| Part # |
Description |
| MD-530-100-100 |
4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
Looking at screw, the threaded section goes to the right. |
| MD-530-125-100 |
5 Ø Bridge Clamp. Clamping range of 120mm-140mm
Looking at screw, the threaded section goes to right. |
| MD-530-150-100 |
6 Ø Bridge Clamp. Clamping range of 150mm-170mm
Looking at screw, the threaded section goes to right. |
| MD-530-200-100 |
8" Ø Bridge Clamp. Clamping range of 200mm-220mm
Looking at screw, the threaded section goes to right. |
| Fan Control Panels (when ordering main unit) |
| Part # |
Description |
| P-025-120S-460V-3PH-20HP |
Energy Saver E- Man© 460V/3/60. Fan Motor control station. Rated up to 20 HP. HP. Permits start-stop of the fan / Dustcollector from a Remote Switch/control. Remote mounted switches must be ordered separately but it is best to interlock the fan with the associate process. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______.Also includes a 50 VA 120V AC transformer for powering the dust collectors sequencer. |
| P-025-24S-120V-1PH-2HP |
Energy Saver E- Man© 120V/1/60. Fan Motor control station for 2 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| Under Carriage Rubber Tailpipe Adapters c/w Vice Grip (Suitable for Round or Oval Tailpipes) |
| Part # |
Description |
| SRF-8 |
8 Rubber nozzle with vice grip - 10 opening |
| SRF-8/D |
8" Rubber nozzle with vice grip and automatic damper - 10" opening |
| SRF-4 |
4" Rubber nozzle with vice grip - 6" opening |
| SRF-4/D |
4" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the Vehicle - 6" opening |
| SRF-5 |
5" Rubber nozzle with vice grip - 8" opening |
| SRF-5/D |
5" Rubber nozzle with vice grip and automatic damper - 8" opening |
| SRF-6 |
6" Rubber nozzle with vice grip - 8" opening |
| SRF-6/D |
6" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the bus - 8" opening |
| Over-head Stack adapter - High Temperature Rubber |
| Part # |
Description |
| RCA-10 |
10" Diesel Stack Adapter - 10" opening for exhaust pipes - C/W under-carriage clip |
| RCA-12 |
10" Diesel Stack Adapter - 12" opening for exhaust pipes - C/W under-carriage clip |
| RCA-4 |
10" Diesel Stack Adapter - 4" opening for exhaust pipe |
| RCA-8/D |
10" Diesel Stack Adapter with maunal damper - 8" opening for exhaust pipe |
| QC-RCA-8 |
10" Diesel Stack Adapter - with 8" quick lock duct connection |
| RCA-5 |
10" Diesel Stack Adapter - 5" opening for exhaust pipe |
| RCA-6 |
10" Diesel Stack Adapter - 6" opening for exhaust pipe |
| RCA-6-EXT-PVEC |
10" Diesel Stack Adapter w/ 6' extension hose for portable Vehicle exhaust cart (P2D2-R1-V3) |
| RCA-8 |
10" Diesel Stack Adapter - 8" opening for exhaust pipe |
| RCA-8-EXT-PVEC |
10" Diesel Stack Adapter w/ 8' extension hose for portable Vehicle exhaust cart |
| Hose, Hood & Nozzle Options |
| Part # |
Description |
| RCA-UCC |
Under Carriage Clip for RCA Nozzle |
| P-230 |
Hose holder for mounting on OM-092 Fan Mounting Bracket or directly to a wall. For max 150mm hose. |
| Automatic Motor Starter |
| Part # |
Description |
| P-025-24S-230V-1PH-0.5HP |
Energy Saver E- Man© 230V/1/60. Fan Motor control station for 0.5 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| P-025-24S-460V-3PH-20HP |
Energy Saver E- Man© 460V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| P-025-24S-575V-3PH-20HP |
Energy Saver E- Man© 575V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| P-025-120S-120V-1PH-2.0 HP |
Energy Saver E- Man© 115V/1/60. Fan Motor control station. Rated up to 2 HP. Permits start-stop of the fan / Dustcollector from a Remote Switch/control. Remote mounted switches must be ordered separately but it is best to interlock the fan with the associate process. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______.Also includes a 50 VA 120V AC transformer for powering the dust collectors sequencer. |
| P-025-120S-240V-1PH-3HP |
Energy Saver E- Man© 240V/1/60. Fan Motor control station. Rated up to 3 HP. Permits start-stop of the fan / Dustcollector from a Remote Switch/control. Remote mounted switches must be ordered separately but it is best to interlock the fan with the associate process. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______.Also includes a 50 VA 120V AC transformer for powering the dust collectors sequencer. |
| P-025-120S-208/230V-3PH-7.5 HP |
Energy Saver E- Man© 208-230V/3/60. Fan Motor control station. Rated up to 7.5 HP. Permits start-stop of the fan / Dustcollector from a Remote Switch/control. Remote mounted switches must be ordered separately but it is best to interlock the fan with the associate process. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______.Also includes a 50 VA 120V AC transformer for powering the dust collectors sequencer. |
| P-025-120S-575V-3PH-20HP |
Energy Saver E- Man© 575V/3/60. Fan Motor control station. Rated up to 20 HP. HP. Permits start-stop of the fan / Dustcollector from a Remote Switch/control. Remote mounted switches must be ordered separately but it is best to interlock the fan with the associate process. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______.Also includes a 50 VA 120V AC transformer for powering the dust collectors sequencer. |
| P-025-24S-575V-3PH-30HP |
Energy Saver E- Man© 575V/3/60. Fan Motor control station. Panel Mounted "Hand/Off/Auto" switch and Pilot light. Rated up to 30 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately #EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...#. Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
| Accessories |
| Part # |
Description |
| Gripple-2-10 |
Gripple Hangers Loop No. 2, 10 Ft. |
| Gripple-2-15 |
Gripple Hangers Loop No. 2,15 Ft.-XP |
| Gripple-2-20 |
Gripple Hanger Loop, No. 2, 20 Ft. |
| Gripple-2-5 |
Gripple Hanger Loop No. 2, 5 Ft. |
| Gripple-3 |
No. 3 Stainless Steel Loop Hanger - 10ft length
|
| Gripple-4 |
Stainless Steel No 4 Straight eyelet 10 ft, gripples |
| TP-6-11 |
6'-11' Telescoping Pole |
| Fan Mounting Brackets |
| Part # |
Description |
| P-016 |
P-Max Fan mounting bracket for Pro-Flex & Supermax Extraction Arms. Only used on the P147, P148, P149 and the P152 fans
|
| P-016-HD |
P-Max Fan mounting bracket for Pro-Flex & Supermax Extraction Arms. Heavy Duty Version for P-153, P-154, P-155, P-156 and P-157 Fans. Complete with 4 - 3/8 X 1.5 bolts, nuts and Lock Washers
|
| P-045 |
P-MAX fan mount bracket c/w swivel.For P-Max fan on H-Max Ext.Boom for Flexi-I,Pro-Flex Extr.Crane(4,5,6.5),VE Ext.Boom for HoseReels&Hose Drops &VE articulating Crane for HoseDrops (4,5,6)
For use only with P-147,P-148, P-149 and P-152 up to P-156 Fans
|
| P-045-SS |
Fan mounting bracket for the Super-Flex or the Extractor Crane 160mm (6.5”) diameter. |
| P-151 |
P-MAX fan mounting bracket c/w swivel. To be used to install a P-Max fan on a H-Max Extension Boom for Flexi-II and E-Z Arm, Pro-Flex Extraction Crane (8" dia.), VE Extension Boom for Hose Reels&Hose Drops (8" dia.) and VE articulating Crane for Hose Drops (8" dia.)
For use only with P-147,P-148, P-149, P-152 up to P-156 Fans
|
| P-766-LW-SS |
Lightweight stainless steel fan mounting bracket w/ hardware to connect fan. |
| OM-092 |
For H-MAX or P-Max Fan/Duct mounting bracket for 2 x 150mm (6)Ø Hoses c/w 150/160 mm (6/6.33) hose/duct connection. Package contains: |
| - Installation Accessories |
| Part # |
Description |
| P-045-100 |
P-MAX fan mount bracket c/w swivel.For P-Max fan on H-Max Ext.Boom for Flexi-I,Pro-Flex Extr.Crane(4,5,6.5),VE Ext.Boom for HoseReels&Hose Drops &VE articulating Crane for HoseDrops (4,5,6)
Turning inlet Ø100mm
|
| IN-NLS-8 |
8 No-Loss Stack, 20 Gauge Galvanized, 2' overall height*. Complete with Internal Backdraft Damper. * alternate heights available upon request. |
| PDK-RF-8 |
Industrial grade duct kit for direct exhausting of P-Max fans - for Ceiling/Roof exhaust. Complete with Gravity Back Draft damper. |
| |
|
