Low Temp Hose Reel - 350 degrees F |
Part # |
Description |
HRM-4-25-LT |
4" Spring Recoil Hose Reel c/w 7.5m (25') of 350 degrees F hose.
|
HRM-4-25-LT-2X |
4" Spring Recoil Hose Reel c/w two 7.5m (25') of 350 degrees F hose.
|
HRM-4-33-LT |
4" Spring Recoil Hose Reel c/w 10m (33') of 350 degrees F hose.
|
HRM-5-25-LT |
5" Spring Recoil Hose Reel c/w 7.5m (25') of 350 degrees F hose.
|
HRM-5-33-LT |
5" Spring Recoil Hose Reel c/w 10m (33') of 350 degrees F hose.
|
HRM-6-25-LT |
6" Spring Recoil Hose Reel c/w 7.5m (25') of 350 degrees F hose.
|
HRM-6-33-LT |
6" Spring Recoil Hose Reel c/w 10m (33') of 350 degrees F hose.
|
HRM-8-25-LT |
8" Spring Recoil Hose Reel c/w 7.5m (25') of 350 degrees F hose.
|
HRM-8-33-LT |
8" Spring Recoil Hose Reel c/w 10m (33') of 350 degrees F hose.
|
High Temp Hose Reel - 850 degrees |
Part # |
Description |
HRM-4-25-HT-850 |
4 Spring Recoil Hose Reel c/w 7.5m (25') of 850 deg. F hose.
|
HRM-4-33-HT-850 |
4 Spring Recoil Hose Reel c/w 10m (33') of 850 deg. F hose.
|
HRM-5-25-HT-850 |
5 Spring Recoil Hose Reel c/w 7.5m (25') of 850 deg. F hose.
|
HRM-5-33-HT-850 |
5 Spring Recoil Hose Reel c/w 10m (33') of 850 deg. F hose.
|
HRM-6-25-HT-850 |
6 Spring Recoil Hose Reel c/w 7.5m (25') of 850 deg. F hose.
|
HRM-6-33-HT-850 |
6" Spring Recoil Hose Reel c/w 10m (33') of 850 deg. F hose. |
HRM-8-25-HT-850 |
8 Spring Recoil Hose Reel c/w 7.5m (25') of 850 deg. F hose.
|
HRM-8-33-HT-850 |
8 Spring Recoil Hose Reel c/w 10m (33') of 850 deg. F hose.
|
Hose Reels without hose |
Part # |
Description |
HR-M-4-XXX |
Hose Reel for use with 4” (100mm) Ø hose. C/W hose stop and 4” inlet connection. Order hose separately.
Please specify hose length when ordering. |
HR-M-5-XXX |
Hose Reel for use with 5” (125mm) Ø hose. C/W hose stop and 5” inlet connection. Order hose separately.
Please specify hose length when ordering. |
HR-M-6-XXX |
Hose Reel for use with 6” (150mm) Ø hose. C/W hose stop and 6” inlet connection. Order hose separately.
Please specify hose length when ordering. |
HR-M-8-XXX |
Hose Reel for use with 8” (200mm) Ø hose. C/W hose stop and 8” inlet connection. Order hose separately.
Please specify hose length when ordering. |
Direct Mount Fans - 0.5 HP - (Motor Starter not included) |
Part # |
Description |
P-147-1 |
P-Max direct drive fan 0.5 HP 115V/1/60
100% weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
P-147-2 |
P-Max direct drive fan 0.5 HP 115-230V/1/60. |
P-147-3 |
P-Max direct drive fan 0.5 HP 208-230-460V/3/60. |
P-147-4 |
P-Max direct drive fan 0.5 HP 575V/3/60. |
Direct Mount Fans - 0.75 HP - (Motor Starter not included) |
Part # |
Description |
P-148-1 |
P-Max© direct drive fan 0.75 HP 115-230V/1/60. |
P-148-2 |
P-Max© direct drive fan 0.75 HP 208-230V/460V/3/60. |
P-148-3 |
P-Max© direct drive fan 0.75 HP 575V/3/60.
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
Direct Mount Fans - 1.0 HP - (Motor Starter not included) |
Part # |
Description |
P-149-2 |
P-Max© direct drive fan 1 HP 208-230V/460V/3/60...
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
P-149-3 |
P-Max© direct drive fan 1 HP 575-600V/3/60...100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
Direct Mount Fans - 1.5 HP - (Motor Starter not included) |
Part # |
Description |
P-152-1 |
P-Max© direct drive fan 1.5 HP 115V/230V/1/60 (use 2HP motor when the TSP is less than 4 w.g.)
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
P-152-3 |
P-Max© direct drive fan 1.5 HP 575-600V/3/60 (use 2HP motor when the TSP is less than 4 w.g.)
Please specify 1.5 or 2 HP
If you need 2HP, please use P-152-3-2HP
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge.
|
P-154-1.5HP-1 |
**DO NOT USE**P-Max© direct drive fan 1.5 HP 115-230V/1/60
Note: Must not be used below 8" SP
100% Weather-proof and can me mounted outdoors/rooftop. Fans are able to be rotated at 45deg increments to allow for angular up/down discharge"
|
Direct Mount Fans - 2.0 HP - (Motor Starter not included) |
Part # |
Description |
P-153-2 |
2 HP direct drive fan 208-230/460/3/60 with BI (cast) aluminum wheel with self cleaning blades, AMCA type B spark resistance construction (rated for 1200CFM@5 w.g.)
If you are direct mounting this fan to a hose reel, extraction arm, brackets P-045, P-151, or wall flex you will need to order an additional flange part number P-153-FL
100% Weather-proof and can be mounted outdoors/rooftop. Fans are able to be rotated at 45 degree increments to allow for angular up/down discharge. |
High Temp Hose Reel - 600 degrees |
Part # |
Description |
HRM-4-25-HT-600 |
4 Spring Recoil Hose Reel c/w 7.5m (25') of 600 deg. F hose.
|
HRM-4-33-HT-600 |
4 Spring Recoil Hose Reel c/w 10m (33') of 600 deg. F hose.
|
HRM-5-25-HT-600 |
5 Spring Recoil Hose Reel c/w 7.5m (25') of 600 deg. F hose.
|
HRM-5-33-HT-600 |
5 Spring Recoil Hose Reel c/w 10m (33') of 600 deg. F hose.
|
HRM-6-25-HT-600 |
6 Spring Recoil Hose Reel c/w 7.5m (25') of 600 deg. F hose.
|
HRM-6-33-HT-600 |
6" Spring Recoil Hose Reel c/w 10m (33') of 600 deg. F hose. |
HRM-8-25-HT-600 |
8 Spring Recoil Hose Reel c/w 7.5m (25') of 600 deg. F hose.
|
HRM-8-33-HT-600 |
8 Spring Recoil Hose Reel c/w 10m (33') of 600 deg. F hose.
|
Hood Options |
Part # |
Description |
AG-Hood |
Air gouging hood, 14 gauge aluminum. Hood to be used for Arc Air Gouging process as a receiving hood for sparks/molten metal up to 3000 deg F. |
Hose Clamps - Bridge style |
Part # |
Description |
MD-530-100-100 |
4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
Looking at screw, the threaded section goes to the right. |
MD-530-125-100 |
5 Ø Bridge Clamp. Clamping range of 120mm-140mm
Looking at screw, the threaded section goes to right. |
MD-530-150-100 |
6 Ø Bridge Clamp. Clamping range of 150mm-170mm
Looking at screw, the threaded section goes to right. |
MD-530-200-100 |
8" Ø Bridge Clamp. Clamping range of 200mm-220mm
Looking at screw, the threaded section goes to right. |
Horizontal boom extensions |
Part # |
Description |
H-MAX-HR-1-HT-2M-850 |
2m (6.5') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 6" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom |
H-MAX-HR-1-HT-3M-850 |
3m (10') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 6" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom |
H-MAX-HR-1-HT-4M-850 |
4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 6" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom. |
H-MAX-HR-2-HT-2M-850 |
2m (7') H-MAX Boom Kit for 8" Hose Reel. Comes complete with:
850 degree High temp 8" diameter hose
Ball Bearing swivel and friction brake
8D Spiral duct kit across the top of the boom. |
H-MAX-HR-2-HT-3M-850-200 |
3m (10') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 8" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom |
H-MAX-HR-2-HT-4M-850 |
4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 8" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom. |
H-MAX-HR-4-HT-4M-850 |
4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
850 degree High temp 12" diameter hose
Ball Bearing swivel and friction brake
Spiral duct kit across the top of the boom. |
Under Carriage Rubber Tailpipe Adapters c/w Vice Grip (Suitable for Round or Oval Tailpipes) |
Part # |
Description |
SRF-4 |
4" Rubber nozzle with vice grip - 6" opening |
SRF-4/D |
4" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the Vehicle - 6" opening |
SRF-5 |
5" Rubber nozzle with vice grip - 8" opening |
SRF-5/D |
5" Rubber nozzle with vice grip and automatic damper - 8" opening |
SRF-6 |
6" Rubber nozzle with vice grip - 8" opening |
SRF-6/D |
6" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the bus - 8" opening |
Over-head Stack adapter - High Temperature Rubber |
Part # |
Description |
QC-RCA-8 |
10" Diesel Stack Adapter - with 8" quick lock duct connection |
RCA-12 |
10" Diesel Stack Adapter - 12" opening for exhaust pipes - C/W under-carriage clip |
RCA-12/D |
12" Diesel Stack Adapter with maunal damper - 14" opening for exhaust pipe |
RCA-4 |
10" Diesel Stack Adapter - 4" opening for exhaust pipe |
RCA-4/D |
10" Diesel Stack Adapter with manual damper - 4" opening for exhaust pipe |
RCA-5 |
10" Diesel Stack Adapter - 5" opening for exhaust pipe |
RCA-5/D |
10" Diesel Stack Adapter with manual damper - 5" opening for exhaust pipe |
RCA-6 |
10" Diesel Stack Adapter - 6" opening for exhaust pipe |
RCA-6/D |
10" Diesel Stack Adapter with manual damper - 6" opening for exhaust pipe. Lindab safe |
RCA-6-EXT-PVEC |
10" Diesel Stack Adapter w/ 6' extension hose for portable Vehicle exhaust cart (P2D2-R1-V3) |
RCA-8 |
10" Diesel Stack Adapter - 8" opening for exhaust pipe |
RCA-8/D |
10" Diesel Stack Adapter with maunal damper - 8" opening for exhaust pipe |
RCA-8-EXT-PVEC |
10" Diesel Stack Adapter w/ 8' extension hose for portable Vehicle exhaust cart |
Round Nozzles with self-closing damper |
Part # |
Description |
P-218-4 |
Ø 150 mm (6) exhaust nozzle of steel with co2 test opening. Rubber damper/ lid.
Ø 100 mm (4) tailpipe conection
|
P-218-5 |
Exhaust nozzle of steel with co2 test opening c/w Ø150 mm (6") opening and Ø125 mm (5") hose connection.
|
P-218-6 |
Exhaust nozzle of steel with co2 test opening c/w Ø150 mm (6) opening and Ø150 mm (6) hose connection.
|
P-218-8 |
Exhaust nozzle of steel with co2 test opening c/w Ø150 mm (6) opening and Ø200 mm (8) hose connection.
|
Hose, Hood & Nozzle Options |
Part # |
Description |
RCA-UCC |
Under Carriage Clip for RCA Nozzle |
ROPE-YELLOW-5/16 |
Yellow Rope 5/16 -Polypropylene
Price per foot |
Automatic Motor Starter |
Part # |
Description |
P-025-24S-230V-1PH-0.5HP |
Energy Saver E- Man© 230V/1/60. Fan Motor control station for 0.5 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
P-025-24S-460V-3PH-20HP |
Energy Saver E- Man© 460V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
P-025-24S-575V-3PH-20HP |
Energy Saver E- Man© 575V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights. |
Sensors and Switches (when ordering main unit) |
Part # |
Description |
MS-12-120V |
Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W Switch and 120V blue 25MM "RUNNING" light. Used for Hose reels only. |
MS-12-24V |
Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W Switch and 24V blue 25MM "RUNNING" light. |
Hose Rings |
Part # |
Description |
LHS-10-HT |
Lev Co Hose stop for 10" hose.
High temp up to 850F. |
Misc. Options |
Part # |
Description |
MS-12-240V-NL |
Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper.. Used for Hose reels only. NO BLUE RUNNING LIGHT INCLUDED. |
Misc. Options (when ordering main unit) |
Part # |
Description |
HR-10-14 |
10-14" Hose Reel Extension Assembly |
Accessories |
Part # |
Description |
Gripple-2-10 |
Gripple Hangers Loop No. 2, 10 Ft. |
Gripple-2-15 |
Gripple Hangers Loop No. 2,15 Ft.-XP |
Gripple-2-20 |
Gripple Hanger Loop, No. 2, 20 Ft. |
Gripple-2-5 |
Gripple Hanger Loop No. 2, 5 Ft. |
Gripple-3 |
No. 3 Stainless Steel Loop Hanger - 10ft length
|
Gripple-4 |
Stainless Steel No 4 Straight eyelet 10 ft, gripples |
HR-10-14-EXT Ring **DISCONTINUED** |
EXT Ring-12GA MS |
ROPE-BLUE-3/8 |
3/8" Blue Rope,sold by complete spool of 30 meters |
TP-6-11 |
6'-11' Telescoping Pole |
Fan Mounting Brackets |
Part # |
Description |
P-045 |
P-MAX fan mount bracket c/w swivel.For P-Max fan on H-Max Ext.Boom for Flexi-I,Pro-Flex Extr.Crane(4,5,6.5),VE Ext.Boom for HoseReels&Hose Drops &VE articulating Crane for HoseDrops (4,5,6)
For use only with P-147,P-148, P-149 and P-152 up to P-156 Fans
|
P-151 |
P-MAX fan mounting bracket c/w swivel. To be used to install a P-Max fan on a H-Max Extension Boom for Flexi-II and E-Z Arm, Pro-Flex Extraction Crane (8" dia.), VE Extension Boom for Hose Reels&Hose Drops (8" dia.) and VE articulating Crane for Hose Drops (8" dia.)
For use only with P-147,P-148, P-149, P-152 up to P-156 Fans
|
P-033-HR |
P-MAX fan mounting bracket for motorized & spring recoil hose reels. Suitable only for the P-147, P-148, P-149 & P-152. |
- Installation Accessories |
Part # |
Description |
HRM-6-HS-NS |
Hose stop for 6 dia. hose reels |
HR-RETRO-FIT-120 |
Retro fit kit to change a spring hose reel into a motorized hose reel. 120V |
IN-NLS-8 |
8 No-Loss Stack, 20 Gauge Galvanized, 2' overall height*. Complete with Internal Backdraft Damper. * alternate heights available upon request. |
LHS-4 |
Lev-Co Hose stop for 4" hose.
Low temp up to 450F.
|
LHS-4-HT |
Lev-Co Hose stop for 4" hose.
High temp up to 850F. |
LHS-6 |
Lev-Co Hose stop for 6" hose.
Low temp up to 450F. |
LHS-6-HT |
Lev-Co Hose stop for 6" hose.
High temp up to 850F. |
LHS-8 |
Lev-Co Hose stop for 8" hose.
Low temp up to 450F.
|
LHS-8-HT |
Lev-Co Hose stop for 8" hose.
High temp up to 850F. |
PDK-8 |
Industrial grade 8" diameter duct kit for direct exhausting of P-Max fans - for wall exhaust. |
PDK-RF-8 |
Industrial grade duct kit for direct exhausting of P-Max fans - for Ceiling/Roof exhaust. Complete with Gravity Back Draft damper. |
Misc. Options |
Part # |
Description |
HR-Handle |
Break-away handle to hang from hose reels and boom arms for easy positioning.
Orange cord and break-away handle to be used to uncoil hose on hose reel drum or to position boom arms. Handle to break off cord at 25lbs of force if caught on vehicle as to not pull down hose reel equipment. |
|
|