| Main System / Part |
| Part # |
Qty |
Description |
| MPH-8-LH |
|
Low profile 800 cfm NEW VERSION source capture mist collector with (2) MIST PLUS™ main filters, 1.0 HP TEFC motor, 115/1/60Hz, with high flow, backward incline blower Painted Airflow Gray with 10 BOTTOM INLET COLLAR. PLEASE SPECIFY RIGHT OR LEFT HAND DOOR. 75 dBA
The unit comes with the mounting brackets. (specify the location of the brackets; Top or Bottom).
Left handed version.
AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
|
| MPH-8-RH |
|
Low profile 800 cfm NEW VERSION source capture mist collector with (2) MIST PLUS™ main filters, 1.0 HP TEFC motor, 115/1/60Hz, with high flow, backward incline blower Painted Airflow Gray with 10 BOTTOM INLET COLLAR. PLEASE SPECIFY RIGHT OR LEFT HAND DOOR. 75 dBA
The unit comes with the mounting brackets. (specify the location of the brackets; Top or Bottom).
Right handed version.
AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
|
| Voltage Options |
| Part # |
Qty |
Description |
| MPH-8-3PH-LH |
|
1.0 HP 3PH TEFC motor with high flow, backward incline blower. 208-230/460/3/60Hz instead of standard 1PH motor. |
| MPH-8-3PH-RH |
|
1.0 HP 3PH TEFC motor with high flow, backward incline blower. 208-230/460/3/60Hz instead of standard 1PH motor. |
| Filter Options (when ordering with main unit) |
| Part # |
Qty |
Description |
| MPH24244DC |
|
24"x24"x4" Hepa Filter, Paper Frame |
| MPH-8-EXAD |
|
External adsorber module, 650 cfm, 25 lbs charcoal capacity. Order charcoal separately. (Adds 5 to outlet height and 12 lbs to shipping weight). For PG-6 use 2PG6-HEPA |
| MPH-8-EXDOP |
|
External 95%@ 0.3 micron DOP filter, 700 cfm (Adds 5" to outlet height and 10 lbs to shipping weight). For PG-6 use 2PG6-HEPA |
| MPH-8-EXHE |
|
External 99.97% @0.3 micron HEPA filter, 700 cfm (Adds 5 to outlet height and 10 lbs to shipping weight). For PG-6 use 2PG6-HEPA |
| MPH-8-EX-MERV 14 |
|
External MERV 14 pleated synthetic, washable filters. (Adds 40 lbs. to ship weight). For PG6- use 2PG6-HEPA. |
| Hose Clamps - Bridge style |
| Part # |
Qty |
Description |
| MD-530-050-100 |
|
2 Ø Bridge Clamp. Clamping range of 50mm-70mm
Looking at screw, the threaded section goes to right. |
| MD-530-075-100 |
|
3 Ø Bridge Clamp. Clamping range of 70mm-90mm
Looking at screw, the threaded section goes to right. |
| MD-530-100-100 |
|
4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
Looking at screw, the threaded section goes to the right. |
| MD-530-125-100 |
|
5 Ø Bridge Clamp. Clamping range of 120mm-140mm
Looking at screw, the threaded section goes to right. |
| MD-530-150-100 |
|
6 Ø Bridge Clamp. Clamping range of 150mm-170mm
Looking at screw, the threaded section goes to right. |
| MD-530-200-100 |
|
8" Ø Bridge Clamp. Clamping range of 200mm-220mm
Looking at screw, the threaded section goes to right. |
| MD-530-250-100 |
|
10 Ø Bridge Clamp. Clamping range of 250mm-270mm
Looking at screw, the threaded section goes to right. |
| Hose Rings |
| Part # |
Qty |
Description |
| HR-10-OM |
|
10 dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-2-OM |
|
2" dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-3-OM |
|
3" dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-4-OM |
|
4" dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-5-OM |
|
5" dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-6-OM |
|
6 dia. Hose Ring to connect oil mist hose to CNC machine |
| HR-8-OM |
|
8 dia. Hose Ring to connect oil mist hose to CNC machine |
| Misc. Options (when ordering main unit) |
| Part # |
Qty |
Description |
| 2AU8-4703 |
|
External 95% DOP filter, 700 cfm. |
| 2DL8-4002 |
|
Drain loop kit, includes 1"x3/4" reducer fitting with 3/4: copper p-trap with fittings and instructions. |
| 2KT8-4124 |
|
L type bracket kit for mounting mist collector to the wall (2 required) |
| 2PG5-MPH5 |
|
0-5 Minihelic dial pressure gauge |
| Hose for Oil Mist |
| Part # |
Qty |
Description |
| DM-113-02.0-104***SEE THERM- From Nova |
|
2.0 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum) |
| DM-113-03.0-104 |
|
3 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
|
| DM-113-04.0-104 |
|
4 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
4" X 6' HANGING ON WALL CLEAR |
| DM-113-05.0-104 |
|
5 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
|
| DM-113-06.0-104 |
|
6 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
|
| DM-113-08.0-104 |
|
8 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear.
Min 25' Lenght
Price per ft. (25' Length Minimum) |
| DM-113-10.0-104 |
|
10 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum) |
| Preventative Maintenance Pressure Gauges, etc. (when ordering main unit) |
| Part # |
Qty |
Description |
| LEV-MC-PG-5 |
|
Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately. |
| MPH-8-PG-6 |
|
0-6" Magnahelic dial pressure gauge with AFS logo with mounting bracket, painted "Airflow Gray".
Install close to the filter access door of MPH-8 |
| PG-10 |
|
Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately. |
| - Installation Accessories |
| Part # |
Qty |
Description |
| MP-1.5DL |
|
1.5 dia. Drain Loop kit c/w PVC pipe, fittings, ball valve and glue |
| MPH-8-DL |
|
Drain loop kit for MPH8
|
| MPH-8-IA |
|
Cover the bottom inlet, and install a 8 collar to FRONT ONLY of unit and install a drain loop, 1 x 3/4 reduce fitting with 3/4 copper p-trap pipe fittings and instructions. |
| MP-SEAL |
|
Astroseal Sealant ( now called Pro-Seal) |
| TUBING-3/4-CLEAR |
|
3/4” I.D. Clear Plastic Tubing. Priced per foot. |
| Replacement filters - (Quantity discounts available upon request) |
| Part # |
Qty |
Description |
| 2AF7-3007 |
|
Adsorber module, refillable (15.5 x 15.5 x 3.25); holds 12 lbs of charcoal for MPH8 |
| 2AF8-4000 |
|
MIST-PLUS filter assembly set. Consists of (2) MIST-PLUS filters on mounting plate (1 assembly required / MPH-8 unit)
|
| 2AF8-4003 |
|
Mist-Plus II, filter assembly set. Consists of (2) Mist-Plus II filters on mounting plate. (1 assembly required / MPH-8 unit) |
| 2AF8-4900 |
|
Replacement Filter |
| 3FM8-4701 |
|
Media replacement PAK (MIST-PLUS™ ) Includes (4) media paks for 2AF8-4000. (1) required per unit. |
| 3FM8-4702 |
|
Media replacement PAK (MIST-PLUS™ II ) Includes (4) media paks for 2AF8-4003. (1) required per unit. |
| 3FM8-4901 |
|
Media replacement PAK (MIST-PLUS™ II ) (3 Req'd) |
| 7FJ9-9007 |
|
HEPA filter for MP4 and MPH-8 |
| 7FP1-4506 |
|
Pleated filter MERV 14, Synthetic, Washable for MPH8 |
| CHARCOAL-CP40 |
|
40 lb of CP Blend of chemisorbant and activated carbon blend.
Target Contaminants: Hydrocarbons VOC's Oxides of sulfur Formaldehyde Nitric Oxide Hydrogen Sulfide Lower molecular weight
aldehydes and organic acids |
