model_icon
(14-05) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Hose Reel - Motorized - 4''/5”/6”/8”/10''/12''/14" dia. (300/475/700/1,200/2000/2900/4300CFM)**
The electric - driven hose reels are for removing exhaust gas emitted by exhaust pipes of every type of vehicle (cars, trucks, tractors, armored vehicles). They are perfect for bus depots, garages, service stations and repair shops. One universal hose reel allows the attaching of hoses of different diameters, lengths, and temperature ratings. The Lev-co hose reel stands out due to its unique high temperature 2500 degree bearings mounted within is side plates, duct connection and supporting frame. The motor is a sealed IP 66 electric motor with back up coil and recoil handle that allows the reel to be operated when no power is available. The reel may be mounted under a roof, within a ceiling structure as well as in a wall or at the end of an extension boom. Available in both Low Temp. as well as High Temp Hose.
  • Low Temp. Hose: suitable for temperatures up to 250º F
  • High Temp. Hose: suitable for temperatures of 850º F
  • Ultra High temp: suitable for temperatures up to 2500 º F
    NB: This reel is also an excellent solution for heavy welding, gouging, plasma and flame cutting. The electric - driven hose reels are for removing exhaust gas emitted by exhaust pipes of every type of vehicle (cars, trucks, tractors, armored vehicles). They are perfect for bus depots, garages, service stations and repair shops. One universal hose reel allows the attaching of hoses of different diameters, lengths, and temperature ratings. The Lev-co hose reel stands out due to its unique high temperature 2000 degree bearings mounted within is side plates, duct connection and supporting frame. The motor is a sealed IP 66 electric motor with back up coil and recoil handle that allows the reel to be operated when no power is available. The reel may be mounted under a roof, within a ceiling structure as well as in a wall or at the end of an extension boom. Available in both Low Temp. as well as High Temp Hose.
  • Low Temp. Hose: suitable for temperatures up to 250º F
  • High Temp. Hose: suitable for temperatures of 850º F
  • Ultra High temp: suitable for temperatures up to 2000 º F
    NB: This reel is also an excellent solution for heavy welding, gouging, plasma and flame cutting.
    CONSTRUCTION: Powder coated finishing electrical reel, hose, hose clamps and remote control. The nozzle is NOT INCLUDED.
    Note: Hose will be shipped in a separate box unless stated otherwise

    • Do you need a BUDGETARY estimate?

    Scroll down and select the products using the "Qty" boxes when completing the form below.
    If available, please email me...

    To make sure that you are a human being and not a robot, please also enter the security word you see on the right in the box:
    Main System / Part
    Part # Qty  Description
    HRE-10-120V-NH Large Hose Reel Assembly. Motorized Hose Reel 10" Diameter- Hose not included. Hose reel driven by a 220V single phase motor. c/w wireless control for up/down of hose reel. Max 50ft of hose.
    HRE-10-NH Large Hose Reel Assembly. Motorized Hose Reel 10" Diameter- Hose not included. Hose reel driven by a 220V single phase motor. c/w wireless control for up/down of hose reel. Max 50ft of hose.
    HRE-12-NH Large Hose Reel Assembly. Motorized Hose Reel 12" Diameter- Hose not included. Hose reel driven by a 220V single phase motor. c/w wireless control for up/down of hose reel.
    Maximum Hose lengths are as follows.
    5.1.7.1 14" diameter by 25' long.
    5.1.7.2 12" diameter by 33' long.
    5.1.7.3 10" diameter by 38' long.
    Low Temp Hose Reel - 350 degrees F
    Part # Qty  Description
    HRE-4-25-LT 4" Motorized Hose Reel - c/w 25' of 350º F hose and Remote Control.
    HRE-4-33-LT 4" Motorized Hose Reel - c/w 10m (33') of 300º F hose and Remote Control
    HRE-5-25-LT 5" Motorized Hose Reel - c/w 8m (25') of 300º F hose and Remote Control.
    HRE-5-33-LT 5" Motorized Hose Reel - c/w 10m (33') of 300º F hose and Remote Control.
    HRE-6-25-LT 6" Motorized Hose Reel - c/w 7.5m (25') of 300º F hose and Remote Control.
    HRE-6-33-LT 6" Motorized Hose Reel - c/w 10m (33') of 300º F hose and Remote Control.
    HRE-8-25-LT 8" Motorized Hose Reel - c/w 8m (28') of 300º F hose and Remote Control.
    HRE-8-33-LT 8" Motorized Hose Reel - c/w 10m (33') of 300º F hose and Remote Control.
    High Temp Hose Reel - 850 degrees
    Part # Qty  Description
    HRE-4-25-HT 4" Motorized Hose Reel - c/w 7.5m (25') of 850º F hose.
    HRE-4-33-HT 4" Motorized Hose Reel - c/w 10m (33') of 850º F hose.
    HRE-5-25-HT 5" Motorized Hose Reel - c/w 7.5m (25') of 850º F hose.
    HRE-5-33-HT 5" Motorized Hose Reel - c/w 10m (33') of 850º F hose.
    HRE-6-25-HT 6" Motorized Hose Reel - c/w 7.5m (25') of 850º F hose.
    HRE-6-33-HT 6" Motorized Hose Reel - c/w 10m (33') of 850º F hose.
    HRE-8-25-HT 8" Motorized Hose Reel - c/w 7.5m (25') of 850º F hose.
    HRE-8-33-HT 8" Motorized Hose Reel - c/w 10m (33') of 850º F hose.
    HRE-8-33-HT-2X 8" Motorized Hose Reel - c/w two 10m (33') of 850º F hose.
    Hose Reels without hose
    Part # Qty  Description
    HRE-4-NH 4'' Motorized hose reel with no hose. Suitable for applications up to 2000 Degrees F.
    HRE-5-NH 5'' Motorized hose reel with no hose. Suitable for applications up to 2000 Degrees F.
    HRE-6-NH 6'' Motorized hose reel with no hose. Suitable for applications up to 2000 Degrees F.
    HRE-8-NH 8'' Motorized hose reel with no hose. Suitable for applications up to 2000 Degrees F.
    Hood Options
    Part # Qty  Description
    AG-Hood Air gouging hood, 14 gauge aluminum. Hood to be used for Arc Air Gouging process as a receiving hood for sparks/molten metal up to 3000 deg F.
    Hose Clamps - Bridge style
    Part # Qty  Description
    MD-530-100-100 4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
  • Looking at screw, the threaded section goes to the right.
    		•
    MD-530-125-100 5 Ø Bridge Clamp. Clamping range of 120mm-140mm
  • Looking at screw, the threaded section goes to right.
    		•
    MD-530-150-100 6 Ø Bridge Clamp. Clamping range of 150mm-170mm
  • Looking at screw, the threaded section goes to right.
    		•
    MD-530-200-100 8" Ø Bridge Clamp. Clamping range of 200mm-220mm
  • Looking at screw, the threaded section goes to right.
    		•
    Horizontal boom extensions
    Part # Qty  Description
    H-MAX-HR-4-HT-4M-850 4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 12" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom.
    		•
    H-MAX-HR-1-HT-2M-850 2m (6.5') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 6" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom
    		•
    H-MAX-HR-1-HT-3M-850 3m (10') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 6" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom
    		•
    H-MAX-HR-1-HT-4M-850 4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 6" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom.
    		•
    H-MAX-HR-2-HT-2M-850 2m (7') H-MAX Boom Kit for 8" Hose Reel. Comes complete with:
  • 850 degree High temp 8" diameter hose
  • Ball Bearing swivel and friction brake
  • 8D Spiral duct kit across the top of the boom.
    		•
    H-MAX-HR-2-HT-3M-850-200 3m (10') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 8" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom
    		•
    H-MAX-HR-2-HT-4M-850 4m (14') H-MAX Boom Kit for Hose Reel. Comes complete with:
  • 850 degree High temp 8" diameter hose
  • Ball Bearing swivel and friction brake
  • Spiral duct kit across the top of the boom.
    		•
    Hood
    Part # Qty  Description
    HOOD-CM-250-4-3-1 Gouging hood. 10" diameter hose connection to 4'H X 3'W x 1' D . Complete with: 18 ga aluminum Construction 10" dia. Hose Swivel Positioning Handle High Heat Flame-resistant fabric liner and 45-degree flair around the perimeter.
    Under Carriage Rubber Tailpipe Adapters c/w Vice Grip (Suitable for Round or Oval Tailpipes)
    Part # Qty  Description
    SRF-4 4" Rubber nozzle with vice grip - 6" opening
    SRF-4/D 4" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the Vehicle - 6" opening
    SRF-5 5" Rubber nozzle with vice grip - 8" opening
    SRF-5/D 5" Rubber nozzle with vice grip and automatic damper - 8" opening
    SRF-6 6" Rubber nozzle with vice grip - 8" opening
    SRF-6/D 6" Rubber nozzle with vice grip, automatic damper, and SAFETY RELEASE in cases where operator forgets to disconnect from the bus - 8" opening
    Over-head Stack adapter - High Temperature Rubber
    Part # Qty  Description
    RCA-8/D 10" Diesel Stack Adapter with maunal damper - 8" opening for exhaust pipe
    QC-RCA-8 10" Diesel Stack Adapter - with 8" quick lock duct connection
    RCA-5 10" Diesel Stack Adapter - 5" opening for exhaust pipe
    RCA-6 10" Diesel Stack Adapter - 6" opening for exhaust pipe
    RCA-6-EXT-PVEC 10" Diesel Stack Adapter w/ 6' extension hose for portable Vehicle exhaust cart (P2D2-R1-V3)
    RCA-8 10" Diesel Stack Adapter - 8" opening for exhaust pipe
    RCA-8-EXT-PVEC 10" Diesel Stack Adapter w/ 8' extension hose for portable Vehicle exhaust cart
    Hose, Hood & Nozzle Options
    Part # Qty  Description
    RCA-UCC Under Carriage Clip for RCA Nozzle
    Electric Hose Reel Accessories
    Part # Qty  Description
    HRE-Motor-120V Motor 220v electric motor designed for electric hose reel. Amperage 1.8, Running 340 Watts 60hrz. Single phase
    HRE-Motor-220V 220v electric motor designed for electric hose reel.
    Amperage 1.8, Running 390 Watts 60hrz. Single phase.
    HRE-SW-WALL Wall bracket for the remote control switch.
    HRE-120-PEND Pendant Controller or hose reel c/w 20' of cable. 120V/1/60. 2 Button moldex controller. Pre-wired at factory prior to shipping.
    HRE-240-PEND Pendant Controller or hose reel c/w 20' of cable. 120V/1/60. 2 Button moldex controller. Pre-wired at factory prior to shipping.
    Automatic Motor Starter
    Part # Qty  Description
    P-025-24S-230V-1PH-0.5HP Energy Saver E- Man© 230V/1/60. Fan Motor control station for 0.5 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights.
    P-025-24S-460V-3PH-20HP Energy Saver E- Man© 460V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Please specify Motor HP when ordering ______. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights.
    P-025-24S-575V-3PH-20HP Energy Saver E- Man© 575V/3/60. Fan Motor control station. Rated up to 20 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 24V AC transformer for powering devices such as halogen Lights.
    Sensors and Switches (when ordering main unit)
    Part # Qty  Description
    HRE-HWS-MA Hard wired switch with Convenient push button control for motorized hose reel. Maintained: Maintained push buttons you push and they stay depressed until you push them again
    HRE-RM-RCVR-120V UNIVERSAL RECEIVER RTS 12OVAC
    HRE-RM-RCVR-220V 220V Universal RTS receiver for motorized hose reel.
    HRE-WLWS Wireless wall switch for motorized hose reel, black in colour with built in Radio Technology.
  • Use in conjunction with part HRE-RM-RCVR
    		•
    HRE-WWS Wired Momentary rocker switch kit with standard plate white in colour. Kit contains switch and switchplate.
  • Field installation required - Not included in price
    		•
    MS-12-120V Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W Switch and 120V blue 25MM "RUNNING" light. Used for Hose reels only.
    MS-12-20A-BHT 20A Bat Handle Toggle, 20 amps @ 125V 10 Amps @ 277V, DPDT,c/w Spade connectors. 1.5 HP
    P-024-1-Box Box For P-024-1 Switch Comes complete with 4 screws
    PG-A4100-10 Differential pressure gauge, 0-20” w.c.
    RCWS-4ST Remote transmitter with Convenient push button control for motorized hose reel, blue in colour. Controls up to 4 hose reels
  • Use in conjunction with part HRE-RM-RCVR
    		•
    MS-12-240V*DISCONTINUED * ' Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W 240V rated Switch.
    MS-12-24V Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W Switch and 24V blue 25MM "RUNNING" light.
    Misc. Options
    Part # Qty  Description
    MS-12-240V-NL Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper.. Used for Hose reels only. NO BLUE RUNNING LIGHT INCLUDED.
    Misc. Options (when ordering main unit)
    Part # Qty  Description
    HR-10-14 10-14" Hose Reel Extension Assembly
    HRE-RCWS TELIS 1 R TS US-Transmitter For both 120V and 220V recievers and hose reel motors
    Controls
    Part # Qty  Description
    P-025-12S-230V-3PH-3HP Energy Saver E- Man© 230V/3/60. Fan Motor control station for 3 HP. Permits automatic start-stop of the fan from the extractor arm hood, hose reel or other device with Remote Switch. Remote mounted switches must be ordered separately (EG: LS-12 - Hood mounted Switch, MS-12 Hose reels...). Comes complete with relevant Motor overload. Also includes a 50 VA 12V AC transformer for powering devices such as halogen Lights.
    Accessories
    Part # Qty  Description
    Gripple-2-10 Gripple Hangers Loop No. 2, 10 Ft.
    Gripple-2-15 Gripple Hangers Loop No. 2,15 Ft.-XP
    Gripple-2-20 Gripple Hanger Loop, No. 2, 20 Ft.
    Gripple-2-5 Gripple Hanger Loop No. 2, 5 Ft.
    Gripple-3 No. 3 Stainless Steel Loop Hanger - 10ft length
    Gripple-4 Stainless Steel No 4 Straight eyelet 10 ft, gripples
    HR-10-14-EXT Ring **DISCONTINUED** EXT Ring-12GA MS
    TP-6-11 6'-11' Telescoping Pole
    Fan Mounting Brackets
    Part # Qty  Description
    P-033-HR P-MAX fan mounting bracket for motorized & spring recoil hose reels. Suitable only for the P-147, P-148, P-149 & P-152.
    - Installation Accessories
    Part # Qty  Description
    PDK-RF-8 Industrial grade duct kit for direct exhausting of P-Max fans - for Ceiling/Roof exhaust. Complete with Gravity Back Draft damper.
    Misc. Options
    Part # Qty  Description
    HR-Handle Break-away handle to hang from hose reels and boom arms for easy positioning. Orange cord and break-away handle to be used to uncoil hose on hose reel drum or to position boom arms. Handle to break off cord at 25lbs of force if caught on vehicle as to not pull down hose reel equipment.