model_icon
(05-09) WETREX single & dual Wet Tables - Explosive Dust - Table Qty, sizes & flow to suit
The WETREX Downdraft Table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It features easy installation and comes ready to run. The workstation is available with a single work surface or with two work surfaces, one on each side.
The WETREX gets the dust immediately wetted, reducing the risk of fire in ductwork and meets OSHA and NFPA regulations for dust collectors located inside the building. The standard unit includes a fiberglass grated work surface, and optional Regain Air Curtain in front to prevent dust from escaping the work zone.
Main System / Part
Part # Description
F1-DHYD1-30-5-4-3R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 36" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-30-5-4-4R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 48" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-30-5-4R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 30" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-30-5-5R DHYD1 Hydrotron Downdraft table c/w one (1) 60" x 30" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-30-5-6-4R DHYD1 Hydrotron Downdraft table c/w one (1) 72" x 48" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-30-5-6R DHYD1 Hydrotron Downdraft table c/w one (1) 72" x 30" table, 3000 CFM, 5 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-4-3R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 36" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-4-4R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 48" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-4R DHYD1 Hydrotron Downdraft table c/w one (1) 48" x 30" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-5-3R DHYD1 Hydrotron Downdraft table c/w one (1) 60" x 36" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-6-3R DHYD1 Hydrotron Downdraft table c/w one (1) 72" x 36" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-8-3R DHYD1 Hydrotron Downdraft table c/w one (1) 96" x 36" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
F1-DHYD1-50-10-8-4R DHYD1 Hydrotron Downdraft table c/w one (1) 96" x 48" table, 5000 CFM, 10 HP 230/3/60 or 575/3/60 motor (please specify voltage when ordering) and Regain (Push-Pull) system.
LEV-WDDT3-1 Complete Single Table with the following Spec:
  • Table Design 36" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 5hp, 600/3/60;
  • Blower set for a capacity of 3000 cfm at 6” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF)with thermal over load protection
  • Manual outlet bleed valve/damper
  • Yellow fiberglass grate
  • LEV-WDDT3-2 Complete Dual Table with the following Spec:
  • Tables Design 36" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 5hp, 600/3/60;
  • Blower set for a capacity of 3000 cfm at 7” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF) with thermal over load protection
  • Manual outlet bleed valve/damper
  • Yellow fiberglass grate
  • LEV-WDDT4-1 Complete Single Table with the following Spec:
  • Table Design 48" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 7.5hp, 600/3/60;
  • Blower set for a capacity of 4000 cfm at 7” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF) with thermal over load protection
  • Manual outlet bleed valve/damper
  • LEV-WDDT4-2 Complete Dual Table with the following Spec:
  • Tables Design 48" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 7.5hp, 600/3/60;
  • Blower set for a capacity of 4000 cfm at 7” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF) with thermal over load protection
  • Manual outlet bleed valve/damper
  • Yellow fiberglass grate
  • LEV-WDDT6-1 Complete Single Table with the following Spec:
  • Table Design 72" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 15hp, 600/3/60;
  • Blower set for a capacity of 6000 cfm at 7” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF) with thermal over load protection
  • Manual outlet bleed valve/damper
  • Yellow fiberglass grate
  • LEV-WDDT6-2 Complete Dual Table with the following Spec:
  • Tables Design 72" x 30"
  • Construction of mild steel (12 gauge construction)
  • Fully welded cabinet with EPOXY interior;
  • Water basin, rear entry with baffles and KIMRE pad impingers;
  • Full one piece gasket on doors and front cap to ensure pressure capacity within collector.
  • Top mounted blower includes housing, AMCA B rating, BI wheel, matching paint, direct drive mounted TEFC motor : 15hp, 600/3/60;
  • Blower set for a capacity of 6000 cfm at 7” wg.
  • Full water level controls with adjustable logic
  • High and Low water level alarms
  • Side Walls with Plexiglass
  • Regain air with adjustable damper & Bleed
  • LED light kit 1x per table
  • Hi & Low Alarm – water level control
  • Magnetic Motor Starter (ON/OFF) with thermal over load protection
  • Manual outlet bleed valve/damper
  • Yellow fiberglass grate
  • WETREX-2-3R Wetrex-2 Downdraft table c/w:

  • One (1) Top mounted Blower SXBD 7.5.HP/460V/3/60

  • Spark proof AMCA C fan 13.5 BI wheel 3450 Rpm

  • 2000 CFM Flow rate "At the table surface" 2000 cfm @ 10 H20

  • (1) 36" x 24" table

  • Auto-Fill controls

  • High and Low water alarms

  • Fan shut off in LOW WATER LEVEL condition

  • Additional terminals that allow the operators compressed air tools to be shut off in LOW WATER LEVEL conditions

  • FULL control panel including Nema 12 enclosure, magnetic motor starter, thermal overload, step down transformer, on/off buttons. 7.5HP 460V/3/60

  • Full one (1) piece gaskets on doors and panels

  • Closed water bath (not open to atmosphere)
  • Silencer Option (when ordering main unit)
    Part # Description
    SIL-DHYD1 Silencer for Downdraft Table model # MII - DHYD1-45.7.6-6-4R (Serial Number 07-100=51-301)
    SIL-DHYD2 Silencer for Downdraft Table model DHYD-2-50-10-4-3R (Serial Number 11-100-13-426)
    Misc. Options (when ordering main unit)
    Part # Description
    F1-DHYD-CSR Slot Crane Regain option for DHYD downdraft tables (Per Side for DHYD-2)
    F1-DHYD-LWA Low Water alarm Option for DHYD Downdraft tables
    F1-DHYD-OWA Overflow water alarm option for DHYD downdraft tables
    Deduct Regain Option (When Ordering Main Unit)
    Part # Description
    F1-DHYD1-30-5-3-REGAIN DEDUCT Regain option for DHYD1-30-5-3R
    F1-DHYD1-30-5-4-REGAIN DEDUCT Regain option for F1-DHYD1-30-5-4R; F1-DHYD1-30-5-4-3R; F1-DHYD1-30-5-4-4R
    F1-DHYD1-30-5-5-REGAIN DEDUCT Regain option for DHYD1-30-5-5R
    F1-DHYD1-30-5-6-REGAIN DEDUCT Regain option for DHYD1-30-5-6R; DHYD1-30-5-6-4R
    F1-DHYD1-50-10-4-REGAIN DEDUCT Regain option for DHYD1-50-10-4R; DHYD1-50-10-4-3R; DHYD1-50-10-4-4R
    F1-DHYD1-50-10-5-3-REGAIN DEDUCT Regain option for DHYD1-50-10-5-3R
    F1-DHYD1-50-10-6-3-REGAIN DEDUCT Regain option for DHYD1-50-10-6-3R
    F1-DHYD1-50-10-8-REGAIN DEDUCT for Regain option for DHYD1-50-10-8-3R; DHYD1-50-10-8-4R
    Preventative Maintenance Pressure Gauges, etc. (when ordering main unit)
    Part # Description
    LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    Replacement filters - (Quantity discounts available upon request)
    Part # Description
    AIP-65008 65% Main Filter, 12" x 12" x 12", 53ft² surface area, 5 micron. For use with the following units: 73-100, 73-200G, 73-200PM).
    AIP-65011 Pleated prefilter for AIP-73-100G and AIP-73-200.
    Sold in boxes of 6, 1 box min order
    Models
    Part # Description
    F1-DHYD1 Hydrotron unit with one down Draft Table.