model_icon
(12-14) VFD System with Manual Dampers and Speed Potentiometer - Type 1
Lev-co’s LEVEL 1 VFD system allows for simple VFD speed control, acceleration and deceleration and sound level management for all of Lev-co's exhaust and filtration solutions.
FUNCTION:
  • The fan is activated by a small local control panel.
  • Acceleration and deceleration settings can be programmed into the VFD in order to eliminated "Peak" demand charges and feedback from the motor.
  • As required, the flow rate can be increased and decreased according to the demand required by the application.
  • Additionally, great reductions in sound level can be achieved by adjust the flow
    The following components are included in this “Level 1” VFD solution:
  • VFD (Variable Frequency Drive)IP55
  • Simple potentiometer speed control plus on/off switch and fan running indicator
  • Do you need a BUDGETARY estimate?

    Scroll down and select the products using the "Qty" boxes when completing the form below.
    If available, please email me...

    To make sure that you are a human being and not a robot, please also enter the security word you see on the right in the box:
    Main System / Part
    Part # Qty  Description
    P-025-L1-1 Control panel for level 1 VFD* solution.

    Comes complete with the following:

  • Pressure gauge 0-20

  • Pressure transducer

  • Hand off auto switch

  • Green pilot light to indicate fan is running

    *Please note VFD must be ordered separately

  • P-025-XCPA-0109A9A-N4-10HP Custom Enclosed Panel Assembly • 1x 60A Non-Fusible Disconnect – Rotary Type • 1x Line Side Fuse Holders (Fuses Included) • 1x Hand/Off/Auto Selector Switch • 1x “High Temp” Pushbutton • 1x Green LED Pilot Light – 24V • 2x Red LED Pilot Light – 24V • 2x Control Relays • 1x Buzzer • Terminal Blocks • English Labelling • 600 – 24V Control Transformer – 100VA (Fuses Included) • 600 – 240V Control Transformer – 500VA (Fuses Included) • NEMA 4/12 Metal Enclosure – Ventilated • Wired, Assembled & ETL/UL/CSA Approved • Made in Canada!
    P-025-XCPA-1204E9A-N4-10HP Control panel for the hose reel and fan. The panel shall allow the manual or automatic start, stop, and speed control of the Fan and provide power to the hose reel motor. The controls shall be designed for a maximum load of a 10 HP fan at 575V/3/60 and 350 Watt 230/1/60 hose reel motor and various controls.
    XCPA-0109A9A-N4 • Custom Enclosed Panel Assembly • 1x 60A Non-Fusible Disconnect – Rotary Type • 1x Line Side Fuse Holders (Fuses Included) • 1x Hand/Off/Auto Selector Switch • 1x “High Temp” Pushbutton • 1x Green LED Pilot Light – 24V • 2x Red LED Pilot Light – 24V • 2x Control Relays • 1x Buzzer • Terminal Blocks • English Labelling • 600 – 24V Control Transformer – 100VA (Fuses Included) • 600 – 240V Control Transformer – 500VA (Fuses Included) • NEMA 4/12 Metal Enclosure – Ventilated • Wired, Assembled & ETL/UL/CSA Approved • Made in Canada! • Thermocouple Relay to be Supplied
    XCPA-1204E9A-N4 • Custom Enclosed Panel Assembly • 1x 60A Non-Fusible Disconnect – Rotary Type • 1x Line Side Fuse Holders (Fuses Included) • 1x Hand/Off/Auto Selector Switch • 1x “High Temp” Pushbutton • 1x Green LED Pilot Light – 24V • 2x Red LED Pilot Light – 24V • 2x Control Relays • 1x Buzzer • Terminal Blocks • English Labelling • 600 – 24V Control Transformer – 100VA (Fuses Included) • 600 – 240V Control Transformer – 500VA (Fuses Included) • NEMA 4/12 Metal Enclosure – Ventilated • Wired, Assembled & ETL/UL/CSA Approved • Made in Canada! • Thermocouple Relay to be Supplied
    Fan / Motor Upgrades or Options (when ordering main unit)
    Part # Qty  Description
    M-MTR-.75HP-3600-C-56-5/8-575/3/60-EXP .75HP Explosion Proof Motor 575/6/60 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size. *CSA Approved Motor*
    M-MTR-0.5HP-3600-B5-71-14-115-230/1/60 Motor 0.5HP 3600 RPM B5 Flange 115/230V, 14 Shaft size, 71 Frame. *CSA Approved Motor*
    M-MTR-0.5HP-3600-B5-71-14-208-230-460/3/60 Motor 0.5HP 3600 RPM B5 Flange 208/230V, 14 Shaft size, 71 Frame. *CSA Approved Motor*
    M-MTR-0.5HP-3600-B5-71-14-575/3/60 Motor 0.5HP 3600 RPM B5 Flange 575V, 14 Shaft size, 71 Frame. *CSA Approved Motor*
    M-MTR-0.75HP-3600-B5-71-14-115-230/1/60 Motor 0.75HP 3600 RPM B5 Flange 115/230V, 14 Shaft size, 71 Frame. *CSA Approved Motor*
    M-MTR-0.75HP-3600-B5-71-14-208-230-460/3/60 Motor 0.75HP 3600 RPM B5 Flange 208/230/460V, 14 Shaft size, 71 Frame. *CSA Approved Motor*
    M-MTR-0.75HP-3600-B5-71-14-575/3/60 Motor 0.75HP 3600 RPM B5 Flange 575V, 14 Shaft size, 71 Frame.*CSA Approved Motor*
    M-MTR-1.5HP-3600-575/3 Motor for MP14, 1.5HP, 145T, 5/8" shaft, 575V, 3PH, 3450 RPM, TEFC. *CSA Approved Motor*
    M-MTR-1.5HP-3600-B5-80-19-575/3/60 Motor 1.5HP 3600 RPM B5 Flange 575V, 19 Shaft size, 80 Frame 1.1kw. *CSA Approved Motor*
    M-MTR-1.5HP-3600-B5-90-19-208-230-460/3/60 Motor 1.5HP 3600 RPM B5 Flange 208/230/460V, 19 Shaft size, 90 Frame. *CSA Approved Motor*
    M-MTR-1.5HP-3600-C-143-5/8-575-EXP 1.5 HP Explosion Proof Motor 575 V 3600 RPM, C/W 143 C flange and a 5/8 shaft size. *CSA Approved Motor*
    M-MTR-1.5HP-3600-C-56-115-230-EXP 1.5 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size
  • WITHOUT OVERLOAD PROECTION *CSA Approved Motor*
  • M-MTR-1.5HP-3600-C-56-5/8-115-230-EXP 1.5 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 or 143 C flange and a 5/8" shaft size.*CSA Approved Motor*
    M-MTR-1.5HP-3600-C-56-5/8-208-460-EXP 1.5 HP Explosion Proof Motor 208-460 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size. *CSA Approved Motor*
    M-MTR-1.5HP-3600-C-56-5-1/2-115-230/1/60 Motor 1.5 hp 3400 rpm C flange mount 115-230 volt/single phase 60 hz.*CSA Approved Motor*
    M-MTR-1.5HP-575/3/60-EXP 1.5HP Explosion proof 575/3/60 Class I / Div. 1 Grp. C,D,F & G - 3600 RPM, 143TC FRAME 7/8'' SHAFT. *CSA Approved Motor*
    M-MTR-10HP-3600-B5-132-38-575/3/60 Motor 10HP 3600 RPM B5 Flange 575V, 38 Shaft size, 132 Frame 7.5kw. *CSA Approved Motor*
    M-MTR-15HP-3600-254T-1 1/8-575-EXP 15 HP Explosion Proof Motor 575 V 3600 RPM, 254T Frame and a 1 1/8 shaft size. *CSA Approved Motor*
    M-MTR-1HP-3600-C-56-3600-115-230-EXP 1 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 C flange and a 5/8 shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-1HP-3600-C-56-3600-115-230-EXP 1 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 C flange and a 5/8" shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-1HP-3600-C-56-5/8-115-230-EXP 1 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-1HP-3600-C-56-5/8-115-230-EXP 1 HP Explosion Proof Motor 120 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-1HP-3600-C-56-5/8-230-460-EXP 1 HP Explosion Proof Motor 230-460 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size. *CSA Approved Motor*
    M-MTR-20HP-3600-254T-1 1/8-575-EXP 20 HP Explosion Proof Motor 575 V 3600 RPM, 254T Frame and a 1 1/8 shaft size. *CSA Approved Motor*
    M-MTR-20HP-3600-B5-160-42-575/3/60 Motor 20HP 3600 RPM B5 Flange 575V, 42 Shaft size, 160 Frame. *CSA Approved Motor*
    M-MTR-2HP-1800-B5-90-24-115-230/1/60 Motor 2HP 1800 RPM B5 Flange 115/230V, 24 Shaft size, 90 Frame. *CSA Approved Motor*
    M-MTR-2HP-1800-B5-90-24-208-230-460/3/60 Motor 2HP 3600 RPM B5 Flange 208-240-460V, 24 Shaft size, 90 Frame. *CSA Approved Motor*
    M-MTR-2HP-3600-B5-90-24-575/3/60 Motor 2HP 3600 RPM B5 Flange 575V, 24 Shaft size, 90 Frame 1.5kw. *CSA Approved Motor*
    M-MTR-2HP-3600-C-145-7/8-575-EXP 2 HP Explosion Proof Motor 575 V 3600 RPM, C/W 145 TC flange and a 1 1/8 shaft size. *CSA Approved Motor*
    M-MTR-2HP-3600-C-56-5/8-115-230-EXP 2 HP Explosion Proof Motor 115-230 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-2HP-3600-C-56-5/8-208-460-EXP 2 HP Explosion Proof Motor 208-460 V 3600 RPM, C/W 56 or 143 C flange and a 5/8 shaft size. *CSA Approved Motor*
    M-MTR-2HP-3600-C-56-5/8-575-EXP Explosion Proof Motor 2 HP 3600 RPM C flange mount 575/3/60 TEFC 56 C Frame. *CSA Approved Motor*
    M-MTR-3HP-208-230/1/60-EXP-CLS1-GRPC&D Explosion proof 3HP 208-230/1/60 Class I / Div. 1 Grp. C&D and Class II/ Div. 1 Grp. F&G. 3450 RPM, NO FLANGE
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-3HP-208-230/3/60-EXP-CLS1-GRPC&D Explosion proof 3HP 208-230/3/60 Class I / Div. 1 Grp. C&D and Class II/ Div. 1 Grp. F&G. 3450 RPM, NO FLANGE. *CSA Approved Motor*
    M-MTR-3HP-3600-B5-90-24-115-230/1/60 Motor 3HP 3600 RPM B5 Flange 115/230V, 24 Shaft size, 90 Frame. *CSA Approved Motor*
    M-MTR-3HP-3600-B5-90-24-208-230-460/3/60 Motor 3HP 3600 RPM B5 Flange 208/230/460V, 24 Shaft size, 90 Frame. *CSA Approved Motor*
    M-MTR-3HP-3600-B5-90-24-575/3/60 Motor 3HP 3600 RPM B5 Flange 575V, 24 Shaft size, 90 Frame 2.2kw. *CSA Approved Motor*
    M-MTR-3HP-3600-C-182-1 1/8-230-460 3 HP MOTOR 230-460V 3600 RPM, 182T C flange, 1 1/8 shaft size and feet. *CSA Approved Motor*
    M-MTR-3HP-3600-C-182-1 1/8-575 3 HP MOTOR 575V 3600 RPM, 182T C flange, 1 1/8 shaft size and feet. *CSA Approved Motor*
    M-MTR-3HP-3600-NF-145- 7/8-208-460 3 HP MOTOR 208/460 V 3600 RPM, 145T NO flange and a 7/8 shaft size. *CSA Approved Motor*
    M-MTR-3HP-3600-NF-145- 7/8-575 3 HP MOTOR 575/3/60 V 3600 RPM, 145T NO flange and a 7/8 shaft size. *CSA Approved Motor*
    M-MTR-3HP-3600-NF-182-1 1/8-115-230 3 HP MOTOR 115/230V 3600 RPM, KX182T NO flange and a 1 1/8 shaft size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • M-MTR-3HP-3600-NF-182-1 1/8-230-460 3 HP MOTOR 230/460V 3600 RPM, 182T NO flange and a 1 1/8 shaft size. *CSA Approved Motor*
    M-MTR-4HP-3600-B5-100-1-230-460 Metric Motor 4 HP 3600 RPM B5 flange 230/460V, 25mm Shaft size, 100L Frame. *CSA Approved Motor*
    M-MTR-4HP-3600-B5-100-28-208-230-460/3/60 Motor 4HP 3600 RPM B5 Flange 208/230/460V, 28 Shaft size, 100 Frame.*CSA Approved Motor*
    M-MTR-4HP-3600-B5-100-28-575/3/60 Motor 4HP 3600 RPM B5 Flange 575V, 28 Shaft size, 100 Frame 3kw. *CSA Approved Motor*
    M-MTR-4HP-3600-B5-100-575 Metric Motor 4 HP 3600 RPM B5 flange mount 575/3/60 TEFC 100L Shaft size 25mm. *CSA Approved Motor*
    M-MTR-4HP-3600-B5-100L-25MM-575 Metric Motor 4 HP 3600 RPM B5 flange mount 575/3/60 TEFC 100L Frame c/w feet. *CSA Approved Motor*
    M-MTR-4HP-3600-B6-100-25-230-460 Metric Motor 4 HP 3600 RPM B6 flange 230/460V, 25mm Shaft size, 100L Frame. *CSA Approved Motor*
    M-MTR-5HP-3450-184T-3ph-TEFC-575 5HP,184T,3450RPM,3PHASE,TEFC. *CSA Approved Motor*
    M-MTR-5HP-3600-B5-112-28-208-230-460/3/60 Motor 5HP 3600 RPM B5 Flange 208/230/460V, 28 Shaft size, 112 Frame. *CSA Approved Motor*
    M-MTR-5HP-3600-B5-112-28-575/3/60 Motor 5HP 3600 RPM B5 Flange 575V, 28 Shaft size, 112 Frame 3.7kw. *CSA Approved Motor*
    M-MTR-5HP-3600-NF-184T-1 1/8-575-EXP 5 HP explosion Proof Motor, 3600 RPM NO flange, 575/3/60V, 184T Frame, 1 1/8 Shaft Size. *CSA Approved Motor*
    M-MTR-7.5HP-3600-B5-132-38-208-230-460/3/60 Motor 7.5HP 3600 RPM B5 Flange 208/230/460V, 38 Shaft size, 132 Frame. *CSA Approved Motor*
    M-MTR-7.5HP-3600-B5-132-38-575/3/60 Metric Motor 7.5HP 3600 RPM B5 Flange 575V, 38 Shaft size, 132 Frame 5.5kw. *CSA Approved Motor*
    M-MTR-LFan Motor for Leader Fan. *CSA Approved Motor*
    M-MTR-RB-80-6bU Regenerative Motor Blower 7.5 HP, 3/60/575V.
  • 175 CFM @ 100 SP
  • Integral inlet and outlet silencers.
  • Precision cast aluminum impeller.
  • 2.5 ” NPT inlet and outlet connections.
  • 3/60/575V, 6.3 kW, 3450 RPM, IP54 rated motor complete with CSA (Canada & US) certification for use in all US states and Canadian provinces. *CSA Approved Motor*
  • M-MTR-RGB-150-90 Regenerative Motor Blower 5 HP, 3/60/575V.
  • 150 CFM @ 90 SP
  • Integral inlet and outlet silencers.
  • Precision cast aluminum impeller.
  • 2.5 ” NPT inlet and outlet connections.
  • 3/60/575V, 5 HP, 3450 RPM, IP54 rated motor complete with CSA (Canada & US) certification for use in all US states and Canadian provinces. *CSA Approved Motor*
  • M-MTR-RGB-175-100 Regenerative Motor Blower 7.5 HP, 3/60/575V.
  • 175 CFM @ 100 SP
  • Integral inlet and outlet silencers.
  • Precision cast aluminum impeller.
  • 2.5 ” NPT inlet and outlet connections.
  • 3/60/575V, 6.3 kW, 3450 RPM, IP54 rated motor complete with CSA (Canada & US) certification for use in all US states and Canadian provinces. *CSA Approved Motor*
  • M-MTR-RGB-390-100 Regenerative Motor Blower 15 HP, 3/60/575V.
  • 390 CFM @ 100 SP
  • Integral inlet and outlet silencers.
  • Precision cast aluminum impeller.
  • 3.5 ” NPT inlet and outlet connections.
  • 3/60/575V, 12.5 kW, 3450 RPM, IP54 rated motor complete with CSA (Canada & US) certification for use in all US states and Canadian provinces. *CSA Approved Motor*
  • N-MTR-0.5HP-1800-C-56-1/2-115-230 NEMA Motor 0.5 HP, 1800 RPM, C flange, 115/230 , 56 Frame, Shaft size 5/8"
  • WITHOUT OVERLOAD PROTECTION. *CSA Approved Motor*
  • N-MTR-0.5HP-1800-C-56-1/2-115-230-EXP NEMA Motor 0.5 HP, 1800 RPM, C flange, 115/230 , 56 Frame, Shaft size 5/8"
  • WITHOUT OVERLOAD PROTECTION
  • Explosion proof. *CSA Approved Motor*
  • N-MTR-0.5HP-3600-B5-71-115/230 NEMA Motor 0.5HP, 3600RPM, B5 flange, 208/230V, N/A Frame,14mm Shaft size. *CSA Approved Motor*
    N-MTR-0.5HP-3600-C-56-1/2-115-230 NEMA Motor 0.5 HP, 3600 RPM, C flange, 115/230 , 56 Frame, Shaft size 5/8
  • WITHOUT OVERLOAD PROTECTION. *CSA Approved Motor*
  • N-MTR-0.5HP-3600-C-56-1/2-230-460 NEMA Motor 0.5 HP, 3600 RPM, C flange, 230/460 V TEFC, 56 Frame, 5/8 Shaft size.*CSA Approved Motor*
    N-MTR-0.5HP-3600-C-56-1/2-575 NEMA Motor 0.5 HP, 3600 RPM, C flange, 575/3/60, 56 Frame 5/8" Shaft size
    N-MTR-0.75HP-3600-C-56-5/8-115 NEMA Motor 0.75 HP, 3600 RPM, C flange, 115 V, D56 Frame, 5/8 Shaft Size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • N-MTR-0.75HP-3600-C-56-5/8-115-230 NEMA Motor 0.75 HP, 3600 RPM, C flange, 115/230 56 Frame, 5/8" Shaft Size
  • WITHOUT OVERLOAD PROECTION
  • N-MTR-0.75HP-3600-C-56-5/8-230-460 NEMA Motor 0.75 HP, 3600 RPM, C flange, 230-460, 56 Frame, Shaft size 5/8. *CSA Approved Motor*
    N-MTR-0.75HP-3600-C-56-5/8-575 NEMA Motor 0.75 HP, 3600 RPM, C flange, 575/3/60 V, 56 Frame, Shaft size 5/8. *CSA Approved Motor*
    N-MTR-0.75HP-3600-NF-56-5/8-115-230 NEMA Motor 0.75 HP, 3600 RPM, No flange, 115/230 V, 56Z Frame, 5/8 Shaft Size
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • N-MTR-1.5HP-1800-56-5/8-575/3/60 NEMA Motor 1.5 hp 1800 rpm w/feet 575 volt/3 phase 60 hz TEFC 56. *CSA Approved Motor*
    N-MTR-1.5HP-1800-C-56-5/8-115-230/1/60 NEMA Motor 1.5 hp 1800 rpm C flange mount 115-230 volt/single phase 60 hz TEFC 56 C Frame flange
  • WITHOUT OVERLOAD PROECTION Load 100%, - efficiency is 90%, 2080 hours/year and 0.11$/kW/h. *CSA Approved Motor*
  • N-MTR-1.5HP-1800-C-56-5/8-575/3/60 NEMA Motor 1.5 hp 1800 rpm C flange mount 575 volt/single phase 60 hz TEFC 56 C Frame flange.*CSA Approved Motor*
    N-MTR-1.5HP-3600-C-143-7/8-115 NEMA Motor 1.5HP, 3600 RPM, C flange, V115, F143T Frame, Shaft Size 7/8
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • N-MTR-1.5HP-3600-C-143-7/8-115-230/1/60 NEMA Motor 1.5 hp 3600 rpm C flange mount 115-230 volt/single phase 60 hz TEFC 143 C Frame flange
  • WITHOUT OVERLOAD PROECTION Load 100%, - efficiency is 90%, 2080 hours/year and 0.11$/kW/h. *CSA Approved Motor*
  • N-MTR-1.5HP-3600-C-143-7/8-575 NEMA Motor 1.5 HP, 3600 RPM, C flange, V575/3/60, F143T Frame, Shaft Size 7/8. *CSA Approved Motor*
    N-MTR-1.5HP-3600-C-56-5/8-115-230/1/60 NEMA Motor 1.5 hp 3600 rpm C flange mount 115-230 volt/single phase 60 hz TEFC 56 C Frame flange
  • WITHOUT OVERLOAD PROTECTION Load 100%, - efficiency is 90%, 2080 hours/year and 0.11$/kW/h.*CSA Approved Motor*
  • N-MTR-1.5HP-3600-C-56-5/8-115-230-D NEMA Motor 1.5HP, 3600 RPM, C flange, V115/230, 56 Frame, Shaft Size 5/8 Demo
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • N-MTR-1.5HP-3600-C-56-5/8-208-460 NEMA Motor 1.5 HP 3600 RPM C flange mount 208-230/460/60 TEFC 56 C Frame. *CSA Approved Motor*
    N-MTR-1.5HP-3600-C-56-5/8-208-460 NEMA Motor 1.5 HP 3600 RPM C flange mount 208-230/460/60 TEFC 56 C Frame. *CSA Approved Motor*
    N-MTR-1.5HP-3600-C-56-5/8-575 NEMA Motor 1.5 hp 3600 rpm C flange 575/3/60 volt,Shaft Size 5/8", 56 Frame
    N-MTR-1.5HP-3600-NF-56-5/8-115-230 NEMA Motor 1.5HP, 3600 RPM, NO flange, V115/230, 56H Frame, Shaft Size 5/8
  • WITHOUT OVERLOAD PROECTION. *CSA Approved Motor*
  • N-MTR-3HP-3600-C-145-7/8-575-EXP 3 HP Explosion Proof Motor 575 V 3600 RPM, C/W 145 TC flange and a 7/8 shaft size. Motor is rated at Class 1/ Division 1 Group C & D and Class 2/ division 1 Group F & G. *CSA Approved Motor*
    N-MTR-7.5HP-3600-C-213-1 3/8-575 Motor 7.5HP 36000 RPM C Flange 575V, 1 3/8" Shaft size, 213T Frame.*CSA Approved Motor*
    Variable Frequency Drives
    Part # Qty  Description
    VFD-AC-460V-3HP-NEMA4X-WHT 3.0 HP AC DRIVE ,460V single or 3 PH IN 3 PH OUT in NEMA 4 enclosure and simple "Dial/Potentiometer" speed control.
    VFD-AC-575V-3P/3P-2HP-ALT 2HP 575V VFD
    VFD-ABB Brand
    Part # Qty  Description
    VFD-A250-0.5-115/1/60 ABB 250 VFD 0.5HP 110V 1-Phase 60Hz
    VFD-A250-0.5-220/1/60 ABB 250 VFD 0.5HP 200V 1-Phase 60Hz
    VFD-A250-0.5-220/3/60 ABB 250 VFD 0.5HP 200V 3-Phase 60Hz
    VFD-A250-1.5-115/1/60 ABB 250 VFD 1.5HP 110V 1-Phase 60Hz
    VFD-A250-10-460/3/60 ABB 250 VFD 10HP 380V 3-Phase 60Hz
    VFD-A250-10-575/3/60 VFD 10HP 575V 3-Phase 60Hz
    VFD-A250-1-115/1/60 ABB 250 VFD 1HP 110V 1-Phase 60Hz
    VFD-A250-1-220/1/60 ABB 250 VFD 1HP 200V 1-Phase 60Hz
    VFD-A250-1-220/3/60 1HP 240V VFD 3-Phase 60Hz
    VFD-A250-1-460/3/60 1HP 480V VFD 3-Phase 60Hz
    VFD-A250-15-575/3/60 ABB 250 VFD 15HP 500V 3-Phase 60Hz
    VFD-A250-1-575/3/60 1HP 600V VFD 3-Phase 60Hz
    VFD-A250-2-220/1/60 ABB 250 VFD 2HP 200V 1-Phase 60Hz
    VFD-A250-2-220/3/60 2HP 230V VFD 3-Phase 60Hz
    VFD-A250-2-460/3/60 2HP 480V VFD 3-Phase 60Hz
    VFD-A250-2-575/3/60 2HP 600V VFD 3-Phase 60Hz
    VFD-A250-3-220/1/60 ABB 250 VFD 3HP 200V 1-Phase 60Hz
    VFD-A250-3-220/3/60 3HP 240V VFD 3-Phase 60Hz
    VFD-A250-3-460/3/60 3HP 480V VFD 3-Phase 60Hz
    VFD-A250-3-575/3/60 3HP 600V VFD 3-Phase 60Hz
    VFD-A250-5-220/3/60 5HP 240V VFD 3-Phase 60Hz
    VFD-A250-5-460/3/60 5HP 480V VFD 3-Phase 60Hz
    VFD-A250-5-575/3/60 5HP 600V VFD 3-Phase 60Hz
    VFD-A250-7.5-460/3/60 ABB 250 VFD 7.5HP 380V 3-Phase 60Hz
    VFD-A250-7.5-575/3/60 ABB 250 VFD 7.5HP 500V 3-Phase 60Hz
    VFD-ABB-600 Veriable Frequency Drive with a ABB Control Panel c/w LED push buttons for start/stop & manual potentiometer for speed control with 600V AC input option.
    Reactors for VFD's
    Part # Qty  Description
    P-025-LIN-R Line Reactor - 20HP 575/3/60
    2 required per fan, 1 at load, 1 at line
    Motorized Dampers
    Part # Qty  Description
    DAMP-MOT-04-120 Ø4" Motorized Damper 120V
    DAMP-MOT-05-120 Ø5" Motorized Damper 120V
    DAMP-MOT-06-120 Ø6" Motorized Damper 120V
    DAMP-MOT-08-120 Ø8" Motorized Damper 120V
    DAMP-MOT-10-120 Ø10" Motorized Damper 120V
    DAMP-MOT-12-120 Ø12" Motorized Damper 120V
    Safety Disconnects for Fans
    Part # Qty  Description
    P-025-SAF-D Safety disconnect option, 600V Ac Disconnect 30A Non Fused 3R
    Digital Pressure gauge with 4-20 MA output
    Part # Qty  Description
    FI-DPT-0025 Differential pressure transmitter 0 - 2.5 H2O
    FI-DPT-005 Differential pressure transmitter 0 - 5 H2O
    FI-DPT-010 Differential pressure transmitter 0 - 10 H2O
    FI-DPT-020 Differential pressure transmitter 0 - 20 H2O
    Manual Blast Gates
    Part # Qty  Description
    IN-BG-04 4" diameter Blast gate
    IN-BG-05 5" diameter Blast gate
    IN-BG-06 6" diameter Blast gate
    IN-BG-08 8" diameter Blast gate
    IN-BG-10 10 diameter Blast gate
    IN-BG-12 12" diameter Blast gate
    Sensors and Switches (when ordering main unit)
    Part # Qty  Description
    LS-12 Hood mounted switch for controlling the fan or light.To be used in conjuction with the P-025 Series Control Panel.
    MS-12-24V Micro-switch for the automatic "Start/Stop" of the fan and/or automatic damper. C/W Switch and 24V blue 25MM "RUNNING" light.
    Misc. Options (when ordering main unit)
    Part # Qty  Description
    VFD-PLATE Mounting plate for VFD and Control panel. Folded 10GA mild steel. 59" x 18".
    Odd Fittings - DP
    Part # Qty  Description
    LEV-THMK-H06L01-01 ProSense temperature sensor, Type K thermocouple, hex nipple probe, ungrounded, 6in insertion length, 1/4in probe diameter, stainless steel sheath, 1/2in male NPT process connection, 1/2in male NPT with 3in 24 AWG wire leads.
    LEV-THMK-HSJ ProSense Type K thermocouple connector, high-temperature standard round pin jack, 662 deg F (350 deg C), glass filled thermoplastic body, brown, thermocouple material pins, 32 AWG to 14 AWG wire size range.
    LEV-THMK-HSP ProSense Type K thermocouple connector, high-temperature standard round pin plug, 662 deg F (350 deg C), glass filled thermoplastic body, brown, thermocouple material pins, 32 AWG to 14 AWG wire size range.
    LEV-THMWK-100-03 ProSense Type K thermocouple temperature sensor extension wire, 2 conductors, 20 AWG, PVC conductor insulation material, yellow and red, overall shielded, PVC jacket, yellow, 100ft coil.
    XTD-0-UNV ProSense programmable temperature transmitter, isolated, RTD, thermocouple, millivolt or potentiometer input, deg F or deg C, 4-20 mA output, 12 to 35 VDC operating voltage, 35mm DIN rail mount, removable screw terminal plugs.
    - Installation Accessories
    Part # Qty  Description
    DPT-020 Differential pressure transmitter 0 - 20 H2O