Lev-co
LEV-CO
182 N Port Road, Unit 3
Port Perry, Ontario L9L 0B7
App Support: 1-888-512-7173
Office: (905) 831-7001 / (888) 862-5356
Fax: (905) 831-7443 / (866) 885-1583
E-Mail: sales@lev-co.com
Model

21-006

Image for (12-05)_MS200-CV_-_Dusts_Mists_&_Gases_-_Multiple_Filter_Configurations_Available_Washable_andor_Dis.jpg

MS200-CV - Non-Powered Filtration & Powered Return from Floor Level - No Fan (1,000-2,000 CFM)

1,000 - 2,000 CFM MS-Series package air cleaner is a industrial/commercial grade high efficiency, side servicing filter housing. The MS series was designed for a variety of filter configurations allowing up to 5 stages.

Function:


Whether you are filtering respirable viruses, or VOC’s or paper dust, the MS series will likely fit the bill. High quality side servicing filter housings are made from 16 GA powder-coated steel and come rated to a maximum of 10” WG. Blower-less filtration housing designed with up to 4 stages of filtration for industrial applications. Designed to handle airflow between 1000 & 2000 CFM , (multiple units can be combined for greater CFM). Filter system comes standard with (1) 4” deep 30% pleated pre-filter, (1) 65% bag filter, 120ft² of media. System can be upgraded with different filter to suit a variety of applications and contaminants.

Clean Filtered Air leaves the diffusion hood and reaches the work table (roughly 1 meter below) after 1.31 seconds after the main filter unit is turned on!

Construction:

16 ga. welded zinc coated steel cabinet, finished with a two part chemical and oil resistant paint, with ULTRA-SEAL filter mounting system and hinged side access doors to filters. Blower less.
 
Part # Qty Description
MS200-CV Modular air cleaner, blower less. Includes 4” pleated 30% prefilter, 95% main filter, 120 sq. ft.

Frequently bought together these options:

 
Part # Qty Description
FO200-0.65-CV 65% Bag Filter Option for Standard 200 Unit.
FO200-2A-CV 2" (50mm) aluminum mesh filter in place of 4" (100mm) pleated pre-filter.
FO200-95DOP-CV 95% DOP HEPA Filter Option for Standard 200 Unit.
FO200-AD-CV Adsorption option, includes:
  • (1) 4" (100mm) pre-filter
  • (1) 95% short bag filter (64 sq.ft.)
  • (2) refillable, v-bank absorber modules
  • (1) 2" (50mm) pleated after-filter, 50 lbs. capacity, rate 2000 cfm
Order charcoal separately. (Adds 22 lbs. to ship weight)
FO200-CV-CV CHEVRON® option, includes:
  • (1) 2" (50mm) aluminum mesh pre-filter
  • (1) 4" (100mm) CHEVRON ® mist eliminator
  • (1) 95% bag filter (120 sq.ft.)
  • (2) drains in cabinet (3/4 FPT)
FO200-EC-CV (1) Easy clean, polyester membrane, cleanable bag filter, MERV 12; replaces standard 95% throw-away filter.
FO200-HEPA-CV 99.97% DOP HEPA Filter Option for Standard 200 Unit.
 
Part # Qty Description
LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling, or Table Mounting Bracket, & 0-5 pressure gauge.
  • 3/16 inside diameter tubing ordered separately
PG-10 Pressure Gauge - complete with Wall, Ceiling, or Table Mounting Bracket & 0-10 pressure gauge.
  • 3/16 inside diameter tubing ordered separately
PG-3 0-3"liquid gauge, surface mounted pressure gauge for T140
 
Part # Qty Description
FAN-0.75-RAD3600-8 Fan, 600 CFM (free-blowing) air & maximum static pressure of 2.75” of Static Pressure W.G.. Motor is direct mounted for Low maintenance and ease of installation.
FAN-1.5-RAD3600-9 Fan, 1200 CFM (free-blowing) air & maximum static pressure of 3.20” of Static Pressure W.G.. Motor is direct mounted for Low maintenance and ease of installation.
FAN-3.0-RAD3600-11 Fan, 1800 CFM (free-blowing) air & maximum static pressure of 5.00” of Static Pressure W.G.. Motor is direct mounted for Low maintenance and ease of installation.
 
Part # Qty Description
BI-122-AFS Adjustable front support, to be used in conjunction with the optional exhaust stack.
BI-135-AFS Adjustable front support, to be used in conjunction with the optional exhaust stack.
BI-150-AFS Adjustable front support, to be used in conjunction with the optional exhaust stack.
BI-165-AFS Adjustable front support, to be used in conjunction with the optional exhaust stack.
BI-182-AFS Adjustable front support, to be used in conjunction with the optional exhaust stack.
BI-122-AR-INLET Optional standard angle ring hole pattern adapter.
BI-135-AR-INLET Optional standard angle ring hole pattern adapter.
BI-150-AR-INLET Optional standard angle ring hole pattern adapter.
BI-165-AR-INLET Optional standard angle ring hole pattern adapter.
BI-182-AR-INLET Optional standard angle ring hole pattern adapter.
 
Part # Qty Description
P-766-HD-GALV Heavy duty galvanized fan mounting bracket with hardware to connect fan.
P-766-HD-GALV-TELE Heavy duty galvanized telescopic fan mounting bracket with hardware to connect fan.
 
Part # Qty Description
MO200-DK-CV Drain kit for 200 unit - (2) kits needed with Chevron Option.
 
Part # Qty Description
BI-122-70-2 Industrial Exhaust Fan 1300 CFM @ 9 w.g. to 2000 CFM@5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with 3 HP, 230-460V/3/60, 3600 RPM. AMCA Type B construction.
BI-122-70-3 Industrial Exhaust Fan 1300 CFM @ 9 w.g. to 2000 CFM@5 w.g.BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with, 3 HP, 575V/3/60, 3600 RPM. AMCA Type B construction.
BI-135-100 Industrial Exhaust Fan 1800 CFM@1.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with, 1.5 HP, 115/230/1/60, 1750 RPM. AMCA type B
BI-135-75-2 Industrial Exhaust Fan 2000 CFM@10 w.g. to 3000 CFM@5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with, 5 HP, 230-460V/3/60, 3600 RPM. AMCA type B
BI-135-75-3 Industrial Exhaust Fan 2000 CFM@10 w.g. to 3000 CFM@5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with, 5 HP, 575V/3/60, 3600 RPM. AMCA type B
BI-150-90-2 Industrial Exhaust Fan 3000 CFM@9 w.g. to 4500 CFM@5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with, 7.5 HP, 230-460V/3/60, 3600 RPM. AMCA type B construction
BI-150-90-3 Industrial Exhaust Fan 3000 CFM@9 w.g. to 4500 CFM@5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class II complete with 7.5 HP, 575V/3/60, 3600 RPM. AMCA type B construction
BI-165-75-2 Industrial Exhaust Fan 4000 CFM@10 w.g. to 5000 CFM@6 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 10 HP/3 PH, 230-460V/3/60, 3600 RPM. AMCA Type B Construction
BI-165-75-3 Industrial Exhaust Fan 4000 CFM@10 w.g. to 5000 CFM@6 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 10 HP/3 PH, 575V/3/60, 3600 RPM.AMCA Type B Construction
BI-182-70-2 Industrial Exhaust Fan 5000 CFM@12" w.g. to 7000 CFM@4 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 15 HP/3 PH, 230-460V/3/60, 3600 RPM. AMCA type B construction
BI-182-70-3 Industrial Exhaust Fan 5000 CFM@12" w.g. to 7000 CFM@4 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 15 HP/3 PH, 575V/3/60, 3600 RPM. AMCA type B construction
BI-182-95-2 Industrial Exhaust Fan 5000 CFM@12" w.g. to 7000 CFM@4 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 15 HP/3 HP, 230-460V/3/60, 3600 RPM. AMCA type B construction
BI-182-95-3 Industrial Exhaust Fan 5000 CFM@12" w.g. to 7000 CFM@4 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 15 HP/3 HP, 575V/3/60, 3600 RPM. AMCA type B construction
BI-270-65-2 10,000 CFM@7.5" w.g. to 12,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, flanged outlet; Class IV complete with 20 HP/3 PH, 230-460V/3/60, 1750 RPM.
BI-270-65-3 10,000 CFM@7.5" w.g. to 12,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, flanged outlet; Class IV complete with 20 HP/3 PH, 575V/3/60, 1750 RPM.
BI-270-85-2 Industrial Exhaust Fan 12,000 CFM@8" w.g. to 14,500 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 25 HP/3 PH, 230/460/3/60, 1750 RPM. AMCA type B construction
BI-270-85-3 Industrial Exhaust Fan 12,000 CFM@8" w.g. to 14,500 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 25 HP/ 3 PH, 575V/3/60, 1750 RPM. AMCA type B construction
BI-270-100-2 Industrial Exhaust fan 14,000 CFM@8 w.g. to 17,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 30 HP/ 3 PH, 230/460/3/60, 1750 RPM. AMCA type B construction
BI-270-100-3 Industrial Exhaust Fan 14,000 CFM@8 w.g. to 17,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 30 HP/ 3 PH, 575V/3/60, 1750 RPM. AMCA type B construction
BI-300-100-2 Industrial Exhaust fan 14,000 CFM@8 w.g. to 17,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 30 HP 230/460/3/60, 1750 RPM. AMCA type B construction
BI-300-100-3 Industrial Exhaust fan 14,000 CFM@8 w.g. to 17,000 CFM@5.5 w.g. BI Direct Drive Fan complete with slip fit inlet, Slip Fit outlet; Class IV complete with 30 HP 575V/3/60, 1750 RPM. AMCA type B construction
 
Part # Qty Description
P-766-HD-GALV-1 Heavy duty galvanized main fan mounting bracket ONLY.
P-766-HD-GALV-BR Rear brace for P-766-HD - Made of 14 GA GALV.
P-766-HD-GALV-LL-1 Left Lower Leg for P-766-HD - Made of 11 GA GALV.
P-766-HD-GALV-LL-2 Left Upper Leg for P-766-HD - Made of 11 GA GALV.
P-766-HD-GALV-MP Nema/IEC Motor plate for P-766-HD - Made of 11 GA GALV.
P-766-HD-GALV-RL-1 Right Lower Leg for P-766-HD - Made of 11 GA GALV.
P-766-HD-GALV-RL-2 Right Upper Leg for P-766-HD - Made of 11 GA GALV.
P-766-HD-GUSSET-PLATE Heavy duty gusset plate option to be welded in the middle of p-766-hd.
 
Part # Qty Description
BI-122-C AMCA type C spark resistant construction option for the BI-122 series fans.
BI-135-C AMCA type C spark resistant construction option for the BI-135 series fans.
BI-150-C AMCA type C spark resistant construction option for the BI-150 series fans.
BI-165-C AMCA type C spark resistant construction option for the BI-165 series fans.
BI-182-C AMCA type C spark resistant construction option for the BI-182 series fans.
 
Part # Qty Description
SIL-BI-122-R0 Silencer option for BI-122-70 Fan.
SIL-BI-135-R0 Silencer option for BI-135-75 Fan.
SIL-BI-150-R0 Silencer option for BI-150-90 Fan.
SIL-BI-150-R0-1 Silencer option for BI-150-90 Fan.
SIL-BI-165-R0 Silencer option for BI-165-75 Fan.
SIL-BI-182-R0-1 Silencer option for BI-182-70 Fan.
 
Part # Qty Description
MO200-VERTICAL-CV Vertical Door Kit.
 
Part # Qty Description
BI-DRAIN Drain, optional accessory for BI Fans, 1/2" push in connection.
  • Installed on site, step drill bit included with kit
  • To be installed at the lowest point on the fan
BI-ACC-DOOR Quick open access/inspection door for BI fans.
BI-EPOXY-122 Epoxy paint option for BI-122 fans - including all accessories.
BI-EPOXY-135 Epoxy paint option for BI-135 fans - including all accessories.
BI-EPOXY-150 Epoxy paint option for BI-150 fans - including all accessories.
BI-EPOXY-165 Epoxy paint option for BI-165 fans - including all accessories.
BI-EPOXY-182 Epoxy paint option for BI-182 fan - including all accessories.
 
Part # Qty Description
PG-20 0-20 Mini-Helic pressure gauge, approximately 3" (75mm)Ø size.
  • Surface mounted
 
Part # Qty Description
LEV-ESTACK-BI-122 No loss stack with gravity damper for the BI-122-70 fan.
LEV-ESTACK-BI-135 No loss stack with gravity damper for the BI-135-70 fan.
LEV-ESTACK-BI-150 No loss stack with gravity damper for the BI-150-90 fan.
LEV-ESTACK-BI-165 No loss stack with gravity damper for the BI-165-X fan.
LEV-ESTACK-BI-182 No loss stack with gravity damper for the BI-182-70 fan.
Get My Instant Quote
Ext.

Technical Info Requested

This site is protected by reCAPTCHA Enterprise and the Google Privacy Policy and Terms of Service apply.