model_icon
(14-055-R2) P2D2 Portable Vehicle Exhaust
The P2D2, Portable Vehicle Exhaust System is an EASY TO POSITION solution for removal of diesel exhaust gases. Ideally suited in areas where conventional exhaust systems cannot reach or exceed budgetary limits. (Patent Pending)



The benefits of this solution are:


  • Powerful exhaust fan removes exhaust gases directly to atmosphere

  • One-person operation that allows the operator to position the nozzle on an OVERHEAD stack without the use of a ladder

  • Ability to service both overhead and under-carriage exhaust pipes

  • Sturdy trolley which allows for storage of all ventilation components

  • Locking casters ensures the base unit stays in place during use

  • Exhaust Port is easily located under the garage door or through a "Garage door Port" that is easily installed in the garage door (sold separately)

  • Service the entire facility, All Bays (Extra Door ports may be required)

  • Easy to store exhaust hose

  • Exhaust hose lengths available up to 100 feet and 2500 degrees F.

  • Engines up to 150 HP @ max RPM & Load select: P2D2-R2-1.5HP

  • Engines up to 200 HP @ max RPM & Load select: P2D2-R2-3HP

  • Engines up to 300 HP @ max RPM & Load select: P2D2-R2-5HP

  • Engines up to 400 HP @ max RPM & Load select: P2D2-R2-7.5HP

  • Engines up to 500 HP @ max RPM & Load select: P2D2-R2-10HP

  • Equipment over 500HP - Call Lev-co for exact product selection


Do you need a BUDGETARY estimate?

Scroll down and select the products using the "Qty" boxes when completing the form below.
If available, please email me...

Main System / Part
Part # Qty  Description
P2D2-E-v4-00-R0 P2D2 with Direct Exhaust
P2D2-R2-1.5HP-2 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850 hose 200 mmØ (8)
  • 1.1 KW (1.5 hp) fan
  • 460V/3/60
  • 12 Amp
  • Electric switch with overload protection bracket
  • 15' Cable and plug
  • ESA (Electrical safety Authority) approved
  • 5" dia. straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8) diameter layflat 600 degree hose.
  • P2D2-R2-1.5HP-3 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850 hose 200 mmØ (8)
  • 1.1 KW (1.5 hp) fan
  • 575V/3/60
  • 12 Amp
  • Electric switch with overload protection bracket
  • 15' Cable and plug
  • ESA (Electrical safety Authority) approved
  • 5" dia. straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8) diameter layflat 600 degree hose.
  • P2D2-R2-10HP-3 Portable P2D2 base unit which comes with the following components:
  • NOW COMES COMPLETE WITH HOSE RECOILER
  • 3M (10')High Temperature Flexi-II extraction arm
  • 1500° hose
  • 7.5 KW (10 hp) fan
  • 575V/3/60
  • Electric switch with overload protection bracket
  • 15' Cable, switch, overload and twist-lock plug
  • ESA (Electrical safety Authority) approved
  • Heavy Duty locking/swivel casters
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 350 mm (14) diameter "layflat" 1500 degree exhaust hose and recoil/storage reel
  • P2D2-R2-20HP-2 Portable P2D2 base unit which comes with the following components:
  • NOW COMES COMPLETE WITH HOSE RECOILER
  • 3M (10') Flexi-II extraction arm
  • 1500° hose 250 mmØ (10)
  • 20hp fan
  • 230-460V/3/60
  • Electric switch with overload protection bracket
  • 15' Cable, switch, overload and twist-lock plug
  • ESA (Electrical safety Authority) approved
  • Heavy Duty locking/swivel casters
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 350 mm (14) diameter "layflat" 1500 degree exhaust hose and recoil/storage reel * Heat dissipation nozzle/hood for vertical stacks
  • P2D2-R2-3HP-1 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850° hose 200 mmØ (8)
  • 2.2 KW (3 hp) fan (P-154 Fan)
  • 115-230V/1/60
  • Electric switch with overload protection bracket
  • 15' Cable
  • ESA (Electrical safety Authority) approved
  • 5" straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8") diameter layflat 600 degree hose.
  • P2D2-R2-3HP-3 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850° hose 200 mmØ (8)
  • 2.2 KW (3 hp) fan (P-154 Fan)
  • 575v/3/60
  • Electric switch with overload protection bracket
  • 15' Cable
  • ESA (Electrical safety Authority) approved
  • 5" straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8") diameter layflat 600 degree hose.
  • P2D2-R2-5HP-3 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850 hose 200 mmØ (8)
  • 5 hp fan
  • 575V/3/60
  • Electric switch with overload protection bracket
  • 15' Cable and plug
  • ESA (Electrical safety Authority) approved
  • 5" straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 16" diameter layflat 600 degree hose.
  • P2D2-R2-1.5HP-1 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850 hose 200 mmØ (8)
  • 1.1 KW (1.5 hp) fan
  • 115V/1/60
  • 12 Amp
  • Electric switch with overload protection bracket
  • 15' Cable and plug
  • ESA (Electrical safety Authority) approved
  • 5" dia. straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8") diameter layflat 600 degree hose.
  • P2D2-R2-3HP-2 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850° hose 200 mmØ (8)
  • 2.2 KW (3 hp) fan (P-154 Fan)
  • 230v-460v/3/60
  • Electric switch with overload protection bracket
  • 15' Cable
  • ESA (Electrical safety Authority) approved
  • 5" straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 200 mm (8") diameter layflat 600 degree hose.
  • P2D2-R2-5HP-2 Portable P2D2 base unit which comes with the following components:
  • 3M (10') Flexi-II extraction arm
  • 850 hose 200 mmØ (8)
  • 5 hp fan
  • 230,460,/3/60
  • Electric switch with overload protection bracket
  • 15' Cable and plug
  • ESA (Electrical safety Authority) approved
  • 5" straight and locking caster
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 16" diameter layflat 600 degree hose.
  • P2D2-R2-10HP-2 Portable P2D2 base unit which comes with the following components:
  • NOW COMES COMPLETE WITH HOSE RECOILER
  • 3M (10') Flexi-II extraction arm
  • 1500° hose 200 mmØ (8)
  • 7.5 KW (10 hp) fan
  • 230-460V/3/60
  • Electric switch with overload protection bracket
  • 15' Cable, switch, overload and twist-lock plug
  • ESA (Electrical safety Authority) approved
  • Heavy Duty locking/swivel casters
  • Handholds that double as lifting points when using an overhead crane
  • Safety rubber covers on all hose clamps wheels and exhaust hose
  • Positioning telescopic pole for positioning hood over Vertical tailpipe
  • 7.5M (25') of 350 mm (14) diameter "layflat" 1500 degree exhaust hose and recoil/storage reel * Heat dissipation nozzle/hood for vertical stacks
  • Variable Frequency Drives
    Part # Qty  Description
    VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Fan Control Panels (when ordering main unit)
    Part # Qty  Description
    CAB-12/4-PL-480-50-30A cord and plug for up to 30 AMP 480V . 3 phase motors. includes connection to relevant disconnect and/ or starter. CSA Approved prior to shipping. 50ft of cable.
    CAB-12/4-PL-575-50-30A cord and plug for up to 30 AMP 575V . 3 phase motors. includes connection to relevant disconnect and/ or starter. CSA Approved prior to shipping. 50ft of cable.
    Hose with temp range up to 850°F (455°C)
    Part # Qty  Description
    PT-SFH-14 silicone fiberglass hose 14 dia.-not suitable for hose reels
  • sold per ft. 25ft min.
  • PT-SFH-8 silicone fiberglass hose 8 dia.-can we have this cut in two peices of 5'
    Over-head Stack adapter - High Temperature Rubber
    Part # Qty  Description
    RCA-8/D 10" Diesel Stack Adapter with maunal damper - 8" opening for exhaust pipe
    Misc. Options (when ordering main unit)
    Part # Qty  Description
    LFD-14-50-HT 50' Exhaust hose x 14" dia. - Lay Flat Ducting - for Portable Fan
    Accessories
    Part # Qty  Description
    IN-RED-LIN-14-8 Reducer 14-8
    LFD-14-25-HT 25' Exhaust hose x 14" dia. - Lay Flat Ducting - for Portable Fan
    LFD-8-25-HT 25' Exhaust hose x 8dia. - Lay Flat Ducting - for Portable Fan with velcro(one end with 1"hook/one end with 1"loop).
    - Installation Accessories
    Part # Qty  Description
    GDDK-08-00-R0 Garage door - Door kit - 8"
    Spare Part (Call for quantity discount)
    Part # Qty  Description
    P2D2-v4-01-R0 Base Plate 3/8" Thick Sheetmetal