model_icon
(01-041) ME Lab & Bench Top - Externally Supported - 2'',3'',4'' Ø **
ME is a local extractor with friction joints designed for use in workplaces where great flexibility is required e.g. laboratories and production environments in lighter industrial applications. Standard version. Suitable for evacuation of most types of airborne contaminants.
  • PP version. Most suitable for evacuation of highly corrosive contaminants in high concentrations.
  • ESD version. For ESD environments, type approved to EN 61340-5-1.
  • ATEX version. For ATEX classed environments, as in directive 94/9/EC category 2, for gases and dust.
    The ME is available in sizes 50, 75 and 100 mm. All sizes are suitable for table mounting, ceiling mounting and wall mounting. The same suction arm is used for suspended mounting from ceilings and walls. Ceiling and wallbrackets consists of anodised square section aluminium profile for high finish and good stability. The 050 and 075 sizes use the same brackets, while the 0100 size has its own selection of brackets. All ceiling brackets are available in eight standard lengths up to 2 m. Longer lenghts can be supplied to special orders. To further simplify your mounting and provide a neat finish, escutcheon plate MTI CT can be used if it is nessary to cut holes in the false ceiling. There are six hoods adapted for ME 50 & 75 and four specially adapted hoods for ME 100. A suitable air flow is from 20 l/s to 125 l/s. 75 m /h - 450 m /h . The ME system is design protected with several patents- and design protections pending. Simple, easy function. The friction joints have a large frictional diameter and are supported with ball bearings. The degree of friction is easily adjusted with a one-hand knob. Adapted support springs balance out the weight of the arm. All arms are equipped with a 360 degree rotational swivel mounted in place. An air tight damper is fitted as standard. Always easy to select the right product. The ME is available in four versions.
  • Do you need a BUDGETARY estimate?

    Scroll down and select the products using the "Qty" boxes when completing the form below.
    If available, please email me...

    To make sure that you are a human being and not a robot, please also enter the security word you see on the right in the box:
    Z-Table mounting with standard anodized aluminum tubes
    Part # Qty  Description
    MEB-1150-100 4" Ø x 46" Long fume extractor arm with anodized aluminum tubes and polypropylene joints. Ceiling mounted version including a manual damper.
    MEB-1900-100 4" Ø x 76" Long fume extractor arm with anodized aluminum tubes and polypropylene joints. Table mounted version including a manual damper.
    MET-2100-100 4" Ø x 84" Long fume extractor arm with anodized aluminum tubes and polypropylene joints. Ceiling mounted version including a manual damper.
    MEB 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    MEB 1300-75 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    MEB 1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    Z-Wall mounting, complete with wall bracket and standard anodized aluminum tubes
    Part # Qty  Description
    MEV 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV 1300-75 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV 2000-75 3" Diameter x 80" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV-1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    Z-With external gas spring wall mounting, complete with wall bracket
    Part # Qty  Description
    MEVS 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket, manual damper and an external gas spring.
    MEVS 1500-75-PP-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete wit wall mounting a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEVS 2000-75-ESD-EX 3" Diameter x 80" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete wit wall mounting a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEVS 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket, manual damper and an external gas spring.
    Z-Table mounting with polypropylene tubes and joints
    Part # Qty  Description
    MB 1900-100-EX 4" Diameter x 76" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Includes a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEB 1000-75-PP 3" Diameter x 40" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    MEB 1300-75-PP 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    MEB 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
    Z-Wall mounting, complete with wall bracket, polypropylene tubes and joints
    Part # Qty  Description
    MEV 1000-75-PP 3" Diameter x 40" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV 1300-75-PP 3" Diameter x 51" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    MEV 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
    Z-Ceiling mounting with an external gas spring
    Part # Qty  Description
    METS 1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
    METS 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    METS 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
    METS 2000-75 3" Diameter x 80" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
    METS 2000-75-ESD-EX 3" Diameter x 80" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    METS 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
    Z-Table mounting for ESD and ATEX requirements
    Part # Qty  Description
    MEB 1000-75-ESD-EX 3" Diameter x 40" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEB 1300-75-ESD-EX 3" Diameter x 51" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEB 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    Z-Wall mounting, complete with wall bracket for ESD and ATEX requirements
    Part # Qty  Description
    MET 2650-100 4" Diameter x 106" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper.
    MET 2650-100-EX 4" Diameter x 106" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEV 1000-75-ESD-EX 3" Diameter x 40" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEV 1300-75-ESD-EX 3" Diameter x 51" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    MEV 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
    Z-Ceiling mounting for ESD and ATEX requirements
    Part # Qty  Description
    MEHR-75-EX Hood Tube L ' 6", polypropylene and carbon impregnated
    MEK 350-75-ESD-EX 14" diameter round domed hood, polypropylene and carbon impregnated
    MEM 250-75-ESD-EX Black 10" diameter hood carbon impregnated
    MEPH 300-75-ESD-EX Black Flat screen hood 12" x 8" polypropylene and carbon impregnated
    MES 300-75-ESD Suction Nozzle L=12", complies with ESD requirements.
    Main System / Part
    Part # Qty  Description
    MEK-351-100-PP Ø14" round domed hood polypropylene -complete with hood tube
    MET 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper.
    MET 1500-50 2" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper.
    MT 2100-100-PP 4" Diameter x 84" Long fume extractor arm with anodized aluminum tubes and polypropylene joints. Ceiling mounted version including a manual damper.
    MVK-126 Wall bracket for 4" diameter arms. Includes a mounting plate 7 7/8" x 4 3/4"
    Reducers-large end/small end
    Part # Qty  Description
    IN-RED-LIN-8-3 8 - 3 Duct Reducer
    Hood Options
    Part # Qty  Description
    MEM-251-100 Metal hood 10", powder coated aluminum and connector
    Wall, Table or Ceiling Bracket (1 Required)
    Part # Qty  Description
    MTI 1250 50" Long standard anodized aluminum ceiling bracket including a 4" side inlet and 7 7/8" x 7 7/16" mounting plate.
    MTI 250 10" Long standard anodized aluminum ceiling bracket including a 4" side inlet and 7 7/8" x 7 7/16" mounting plate.
    Hood
    Part # Qty  Description
    MEM-250-75 Metal hood 10" diameter, powder coated aluminum.
    MEPH-375-100 Flat screen hood 15" x 10" (PETG) material for 4" diameter arm
    MES-300-50 2" Suction Nozzle L=12" in standard aluminum
    MK 350-75 14" diameter round domed hood (PETG) material 3" arm.
    Accessories
    Part # Qty  Description
    Flexi-Movex-WALL-BRK Wall bracket from Flexi to Movex arms
    MTI 125-118 5” PROFILE RAIL ALUMINIUM EXTRUSION ONLY
    - Installation Accessories
    Part # Qty  Description
    MBF Flexible table bracket for 3" and 4" diameter extraction arms